Task Force Tips Master Stream 3200 Manuale del proprietario

©Copyright Task Force Tips LLC 2018-2021 1 LIM-031 May 13, 2021 Rev01

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

G-Force

INSTRUCTION FOR INSTALLATION, OPERATION, AND MAINTENANCE

Master Stream 3200

Supplemental Instructions for use with

LIM-030 Manual for Masterstream Nozzle Series

DANGER

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/

serial-number.

This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).

This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel.

FIXED/SELECTABLE

SERIES

FLOW SETTING PRESSURE K

FACTOR

LPM BAR/KPA/80

MASTER STREAM

3200 SELECTABLE

1600 8 39

2400 8 59

3200 8 78

©Copyright Task Force Tips LLC 2018-2021 2 LIM-031 May 13, 2021 Rev01

The member companies of FEMSA that provide emergency

response equipment and services want responders to know and

understand the following:

1. Fireﬁghting and Emergency Response are inherently

dangerous activities requiring proper training in their hazards

and the use of extreme caution at all times.

2. IT IS YOUR RESPONSIBILITY to read and understand

any user’s instructions, including purpose and limitations,

provided with any piece of equipment you may be called on

to use.

3. IT IS YOUR RESPONSIBILITY to know that you have been

properly trained in Fireﬁghting and/or Emergency Response

and in the use, precautions, and care of any equipment you

may be called upon to use.

4. IT IS YOUR RESPONSIBILITY to be in proper physical

condition and to maintain the personal skill level required to

operate any equipment you may be called upon to use.

5. IT IS YOUR RESPONSIBILITY to know that your equipment is

in operable condition and has been maintained in accordance

with the manufacturer’s instructions.

6. Failure to follow these guidelines may result in death, burns or

other severe injury.

Fire and Emergency Manufacturers and Service Association, Inc.

PO Box 147, Lynnﬁeld, MA 01940 • www.FEMSA.org

PERSONAL RESPONSIBILITY CODE

DANGER

LIM-030 Masterstream

Nozzle Series Manual

©Copyright Task Force Tips LLC 1999-2020 1 LIM-030 November 16, 2020 Rev15

TASK FORCE TIPS LLC

MADE IN US A · tft.com

3701 InnovationWay, Valparaiso,IN 46383-9327 USA

800-348-2686· 219-462-6161 · Fax 219-464-7155

INSTRUCTIONS FOR INSTALLATION, OPERATION, AND MAINTENANCE

Masterstream

Nozzle Series

WARNING

Understand manual before use. Operat ion of this de vice without under standing the manual and

receiving proper training is a misuse of this equi pment. Obtain safety information at tf t.com/serial-

number.

This equipment is intended for use by trained and qualied emergency services personnel for

reghting.All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdict ion (AHJ).

This instruction manual is intended to familiarize reghters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. Th is manual shou ld be

kept available to all operating and maintenance personnel.

MASTERSTREAM 1000

150 - 1000 GPM @ 100 PSI

600 - 4000 L/min @ 7 BAR (700 kPa)

MASTERSTREAM 1250S

150 - 1250 GPM @ 100 PSI

600 - 4500 L/min @ 7 BAR (700 kPa)

MASTERSTREAM 1250

300 - 1250 GPM @ 70 - 120 PSI

1100 - 4700 L/min @ 4.8 - 8.3 BAR (480 - 830 kPa)

MASTERSTREAM 1500

300 - 1500 GPM @ 70 - 120 PSI

1100 - 5700 L/min @ 4.8 - 8.3 BAR (480 - 830 kPa)

MASTERSTREAM 2000

300 - 2000 GPM @ 80 - 120 PSI

1100 - 7600 L/min @ 5.5 - 8.3 BAR (550 - 830 kPa)

MASTERSTREAM 4000

600 - 4000 GPM @ 80 - 120 PSI

2300 - 15000 L/min @ 5.5 - 8.3 BAR (550 - 830 kPa)

SUPPORTING MATERIALS

The following documents contain supporting safety and operating information pertaining

to the equipment described in this manual.

©Copyright Task Force Tips LLC 2018-2021 3 LIM-031 May 13, 2021 Rev01

1.0 FLOW CHARACTERISTICS

1.1 FLOW VS. PRESSURE

The Master Stream 3200 Selectable Nozzle allows the user to select one of several orifice sizes by turning a knob at the front of the

nozzle. An indicator on the knob shows which flow is selected.

Figure 1.1

1.2 REACH AND TRAJECTORY

The graph gives the stream trajectory for the Master Stream Series nozzles at various flows.

Notes on trajectory graph:

• Graphs show approximate effective stream trajectory at 30 degrees elevation in no wind conditions. Distance to last water drops

approximately 10% farther.

• To estimate trajectories at elevations other than 30 degrees, refer to document LTT-135, available at tft.com.

• Trajectories shown are for water. The addition of foam is expected to decrease the reach by 10%.

• Tail or head winds of 20 MPH (30 KPH) may increase or decrease the range approximately 30%.

• Stream trajectory of Master Stream 3200 based on “The Trajectories of Large Fire Fighting Jets” by A.P. Hatton and M.J. Osborne,

Reference: “The International Journal of Heat and Fluid Flow”, Vol 1 No 1.

Figure 1.2

2.0 EXPLODED VIEWS AND PARTS LISTS

Exploded views and parts lists are available at tft.com/serial-number.

250

500

750

1000

1250

1500

1750

2000

2250

2500

2750

3000

3250

3500

3750

4000

4250

4500

4750

5000

5250

5500

Nozzle Pressure (BAR)

Flow (LPM)

Master Selectable Flow vs Pressure

1600 LPM @ 8 BAR

2400 LPM @ 8 BAR

3200 LPM @ 8 BAR

METERS

MASTER STREAM 3200 @ 8 BAR (800 KPA)

80 900 10203040506070

METERS

5ABC

LPM

FLOW

1600

2400

3200

KGF

REACTION

100

160

210

CURVE

©Copyright Task Force Tips LLC 2018-2021 4 LIM-031 May 13, 2021 Rev01

3.0 WARRANTY

Task Force Tips LLC, 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its

products (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and

workmanship during the five (5) year period from the date of purchase. TFT’s obligation under this warranty is specifically limited to

replacing or repairing the equipment (or its parts) which are shown by TFT’s examination to be in a defective condition attributable to

TFT. To qualify for this limited warranty, the claimant must return the equipment to TFT, at 3701 Innovation Way, Valparaiso, Indiana

46383-9327 USA, within a reasonable time after discovery of the defect. TFT will examine the equipment. If TFT determines that there is

a defect attributable to it, TFT will correct the problem within a reasonable time. If the equipment is covered by this limited warranty, TFT

will assume the expenses of repair.

If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT may elect to

refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its obligations under this limited

warranty. If TFT makes this election, claimant shall return the equipment to TFT free and clear of any liens and encumbrances.

This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person who is an

intended or unintended beneficiary of the equipment, shall not be entitled to recover from TFT any consequential or incidental damages

for injury to person and/or property resulting from any defective equipment manufactured or assembled by TFT.

It is agreed and understood that the price stated for the equipment is in part consideration for limiting TFT’s liability. Some states do not

allow the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including failure to

provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or altered by someone else.

THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE EQUIPMENT ALL

IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE.

THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT STATED IN THIS DOCUMENT.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Task Force Tips Unità di controllo

Task Force Tips

Task Force Tips Ball Intake Valve Manuale di programmazione

Task Force Tips

Task Force Tips TORNADO Manuale di programmazione

Task Force Tips

Task Force Tips G-Force G A Series Manuale utente

Task Force Tips

Task Force Tips Max Flip Tip2 Manuale utente

Task Force Tips

Task Force Tips Low Profile Ball Intake Valve Manuale di programmazione

Task Force Tips

Task Force Tips PA2BF-L Manuale utente

Task Force Tips

Task Force Tips Pressure Relief Valve Guida rapida

Task Force Tips

Task Force Tips VORTEX 2 ER Manuale di programmazione

Task Force Tips

Task Force Tips ER Bubble Cup Manuale di programmazione

Task Force Tips

Task Force Tips OASIS HYDRANT ASSIST VALVE Guida rapida

Task Force Tips

Task Force Tips A1150 Guida rapida

Task Force Tips

Task Force Tips Ball Intake Valve Manuale di programmazione

Task Force Tips

Task Force Tips METRO 0 Series Istruzioni per l'installazione

Task Force Tips

Task Force Tips Ball Intake Valve Guida rapida

Task Force Tips

Task Force Tips FlipTip Istruzioni per l'installazione

Task Force Tips

Task Force Tips Ball Intake Valve AXD1ST-NX-T Manuale di programmazione

Task Force Tips

Task Force Tips Twister Manuale di programmazione

Task Force Tips

Task Force Tips 2.5” GATED WYE Guida rapida

Task Force Tips

Task Force Tips Ball Intake Valve Guida rapida

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Shini

Shini SPV-U Series Manuale utente

Flyron

Flyron FN-BC04 Manuale utente