Taurus Amplification TR Series Manuale utente
RMS power of the amplifier should not be higher then
speaker's RMS power assuming that impedances of both are
equal.
Never overload the power AMP.
Do not connect DC sources to the speakers.
Do not place the speakers close to TV sets, PC monitors,
magnetic tapes and disks, etc.
Protect speakers from water and high humidity.
RoHS
Disposal of old Electrical & Electronic Equipment (Applicable throughout the
European Union and other European countries with separate collection
programs)
This symbol, found on your product or on its packaging, indicates that this product should not be
treated as household waste when you wish to dispose of it. Instead, it should be handed over to an
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences to the
environment and human health, which could otherwise be caused by inappropriate disposal of this
product. The recycling of materials will help to conserve natural resources. For more detailed
information about the recycling of this product, please contact your local city office, household
waste disposal service or the retail store where you purchased this product.
PRECAUTIONS
TR-Series BASS
SPEAKER CABINETS
MANUAL
Box Electronics
ul Cieszynskiego 4
81-881 Sopot
Poland
tel +48 58 550 66 46
tel/fax +48 58 551 90 05
e-mail [email protected]
www.taurus-amp.pl
Taurus
DESIGNED BY MUSICIANS FOR MUSICIANS
CONNECTORS
CONNECTIONS
All types of our speakers are fitted with two input connectors what makes it
possible to build multi−speaker systems. In this kind of connection speakers'
impedance is decreased. The table below presents impedance levels for
particular set−ups. Important issue to remember is not to connect speakers with
overall impedance less then AMP's minimal output impedance because it could
cause overloading and/or damage to the speakers.
When connecting speakers with amplifiers one should always make sure that
left and right speakers are not crossed in phase witch means that the positive
and negative signals are not swapped over in any of the speakers. Phase
mismatch results with worse quality of low frequencies and wrong stereo
image.
Parallel speaker
configurations
Two 8ohm cabinets
Two 4ohm cabinets
One 8ohm cabinet and one 4 ohm cabinet
Two 8ohm cabinets and one 4 ohm cabinet
Three 8ohm cabinets
Four 8ohm cabinets
4ohm
2,7ohm
2ohm
2ohm
2,7ohm
2ohm
Total system
impedance
INPUT
LINK
3 level
TWEETER switch
Concert − 100%
Studio − 60%
OFF
SPEAKON & JACK
Neutrik connector
SPEAKON & JACK
Neutrik connector
TERMINAL
+- -+
JACK MONO
SPEAKON
1+
1-
2+
2-
-
+
PHASE
TYPE
TR−212
TR−1510
TR−410
Power Hending
RMS
Impedance
Sensitivity
(1W/1m)
Configuration
LF − Speakers
Connectors
Weight
Cover
HF − Speakers
HF − Control
500W 500W 1000W 500W
4ohm
100dB 99dB 103dB 102dB
two way
black carpet
2x12" 4x10"
Neodimium Neodimium Neodimium Neo + Ferrite
1x15”+1x10" 1x12”+2x10"
740mm
520mm
405mm
740mm
520mm
405mm
885mm
520mm
405mm
885mm
520mm
405mm
27kg 27kg 32.5kg 32,5kg
SPECIFICATIONS
TR−1210
H
W
D
Dimensions:
HORN level switch 100 − 60% − OFF
4ohm 4ohm 4ohm
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
compression driver
ceramic tweeter ceramic tweeter
compression driver
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Taurus Amplification Altoparlanti
