GO WITH THE FLOW.
STEPS TO SET UP SUPERBOX DELIVERY POINTS
IN HD MANAGER:
You will need to download the HD Manager software onto one PC for use. The
software is located on the USB stick that comes with the Superbox or Tecalemit
Technical Support can send a link for download.
• Open your HD Manager Software.
• Click on the Masterdata tab.
• Click on HDA in the green bar.
• Click on the Fuel Terminal tab.
• In the "Identier" eld, type a name you would like to call your Superbox.
• In the "Type" eld, drop down the box so it reads "HDA 5 eco” (Superbox).
• Go to the "Communication" eld and drop and select the "USB Flash Drive"
option.
• Click the "Save" button on the bottom right.
• Now click on the Delivery Point tab.
• On the right-hand side, type in the product you are dispensing in the "Product
name" and "Displayed name" eld.
• Click the "Save" button to the right.
• Now click Product 2 and repeat above steps until all products are listed.
*Note - If you have 2 dispense points using the same product you only need to list that product 1 time.
• Now go to the left-hand side of the screen.
• In the "Delivery Point" eld, begin with 1.
• Fill in the "Fueling Limit" eld with how much product drivers/vehicles are
able to get during a single transaction.
• Fill in the "Fueling Time Out" eld with how many minutes the transaction
will last without the box seeing pulses from the meter.
Tel +1-281-446-7300 I Fax 281-619-5613
