Technologic Systems Date
Title:
Rev: Designer Sheet of
TS-7680 Documentation
1
B
Sept. 1, 2015
20
Board can be powered by 8-28 VDC or 24VAC
SiLab uC is powered up first, then
- USB Device to Console conversion
SiLab uC does these functions:
- Controls MX286 Sleep mode
- Can read Push Switch for Wake-up
- Controls MX286 power up sequence
- Measures Analog Power Rails
- Controls SuperCap charging
Comments:
UART0 --> BlueTooth or other
RS-232 RJ45 (2)
Modbus RJ45
Screw Term RS-485
UART4
Serial Port Usage
it controls the MX286 start up
All Parts are Industrial Temp
Rev.A --> B Changes
2) Changed NAND to eMMC
3) Changed to SiLab micro
5) Current Loop can be controlled
6) Added SPI Flash for booting
8) Added SuperCap Option
9) Bluetooth now has UART HS
10) Changed FPGA to MACH X02
1) Changed to Vertical battery holder
7) Added accelometer option
4) Changed RTC chip to ST Micro
MAX3100 Daughter Card (TTL)
UART1
UART2
UART3
MUX
- Can trun on Blue LED
11) Added CAN J1939 RC to both ports
