Tecnodom PERFEKT Manuale utente
USE AND MAINTENANCE MANUAL
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
13
EN
USE AND MAINTENANCE
MANUAL
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
14
1. GENERAL PRELIMINARY INFORMATION
Thank you for purchasing one of our products.
Carefully read this manual before carrying out installation, maintenance and/or before using the equipment.
This manual is attached to the series REFRIGERATED CABINETS version PERFEKT | PERFEKT PLUS.
The Manufacturer is not liable for breakages, accidents or various problems due to non-compliance with and in any case the
non-application of the provisions contained in this manual.
1.1. PURPOSE OF THE DOCUMENT
This User and Maintenance Manual represents the reference document, drawn up by the manufacturer of the equipment,
aimed at operators and specialised personnel who will come into contact with it during its entire life cycle.
The purpose of the document is to provide information for the correct use of the equipment, from installation to disposal,
bringing attention to the dangers that may arise from incorrect use and taking into account the reasonably foreseeable incorrect
behaviour of the operator.
1.2. SUPPLY AND PRESERVATION
The manual is supplied in paper and electronic format.
This manual is an integral part of the equipment.
Keep this manual in a place that is accessible to all users for future consultation. In case of transfer or sale of the equipment,
be sure to provide the new user with this manual, so that they may be properly informed about the installation procedure, the
use and safety requirements.
1.3. SYMBOLS USED IN THE MANUAL
Symbols are used throughout the manual to emphasise information of significant importance.
The ones used are provided below:
SYMBOL TYPE DESCRIPTION
WARNING Symbol used to identify important warnings for the safety of the operator and/
or equipment.
FORBIDDEN
Symbol used to identify operations that must not be performed or behaviours
that must not be adopted as they could cause personal injury or damage to the
machine.
OBLIGATION Symbol used to identify particularly important information inside the manual. The
information also regards the safety of personnel involved in use of the equipment.
USE AND MAINTENANCE MANUAL
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
15
EN
1.4. REGULATORY FRAMEWORK
The equipment has been designed according to the regulatory framework described in the declarations of conformity
accompanying the product and the identification plate placed on the same, as well as requirements, which can be downloaded
directly from the manufacturer’s website.
1.5. WARRANTY
The warranty terms established by law apply. Should the product be faulty, contact the nearest Authorised Service Centre, or
the reference Dealer.
The following documentation must be forwarded in order to repair the equipment;
▪serial number;
▪copy of the invoice with the date of purchase of the product;
▪description of the fault.
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
16
2. SAFETY WARNINGS
The Manufacturer cannot be held liable for any damage, suffered by people or things,
caused by non-compliance with the aforementioned requirements or deriving from
tampering with even a single part of the equipment and from the use of non-original spare
parts.
This professional equipment can only be used and cleaned by adults (> 18 years in Europe
or other limits defined by the local regulatory framework) with normal physical and mental
health and adequately trained and informed on the subject of health and safety in the
workplace.
Wait until the desired temperature set on the control panel is reached before loading the
products into the refrigerated cabinet. Avoid setting temperatures lower than those relating
to the refrigerated cabinet category, as this would cause the evaporator to clog.
Use suitable food containers for food contact materials for the storage and display of
unpackaged food and anything else to meet food safety in accordance with local regulations.
Strictly avoid placing hot pots, products or objects on or near the equipment.
Do not damage and bend the evaporator flaps and the refrigerated fluid pipes.
The power supply must be disconnected before carrying out maintenance, control, cleaning
operations.
All routine and special maintenance operations, both of the refrigerated cabinet and of the
refrigerating monoblock or of the built-in condensing unit, must be carried out with the unit
stopped, disconnecting the power supply.
It is recommended to have specialised personnel carry out cleaning operations.
The electrical plug of the refrigerated cabinet must always be connected to a fixed socket.
It is forbidden to connect the electric plug of the cabinet to an extension and/or reducer.
All operations regarding maintenance and replacement of parts must be carried out by
qualified technical personnel.
Do not store explosive substances, such as pressurised containers with flammable
propellants, in this appliance.
USE AND MAINTENANCE MANUAL
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
17
EN
The installation of the appliance and of the refrigerating unit must only be carried out by
the Manufacturer’s technicians or by expert personnel.
Should the power supply cable be damaged, it must be replaced by the manufacturer or
its technical assistance service or in any case by a person with similar qualifications, in
order to prevent any risk.
It is strictly forbidden to make changes to the equipment.
When replacing parts and when removal of the plug is required, it must be clearly indicated
that the plug must be removed in such a way that the operator can verify from any point they
have access to that the plug remains unplugged.
Replace any broken or faulty components only with original spare parts.
2.1. OBLIGATIONS AND PROHIBITIONS
2.1.1. OBLIGATIONS
▪To install the equipment, follow the instructions in the “INSTALLATION” chapter. Installation must be carried out
exclusively by qualified technical personnel.
▪Keep the entire area around the equipment free and clean.
2.1.2. PROHIBITIONS
▪Do not install the equipment if it appears damaged upon receipt.
▪Do not allow children to play with the equipment.
▪Do not use the equipment as a work surface or as a support surface.
▪Do not place or keep flammable liquids or materials, or easily ignitable objects inside the equipment or in the immediate vicinity.
▪Do not move the refrigerated cabinet by grabbing it by the handle, but do so from the sides.
▪Do not place the refrigerated cabinet under direct exposure to sunlight and all other forms of thermal radiation.
▪Do not place the product inside a room with high relative humidity (potential formation of condensate).
▪Do not place the product inside a closed recess or close to a wall.
▪Do not obstruct the air vents.
▪Do not modify or tamper with the equipment in any way.
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
18
3. IDENTIFICATION AND DESCRIPTION
3.1. EQUIPMENT IDENTIFICATION
An identification plate is placed on the back of the equipment, which shows:
▪the serial number,
▪the type/functional features,
▪the details of the certification and marking.
It is strictly prohibited to remove the identification plate and/or replace it with other plates.
Should the plate be damaged, detached or removed for accidental reasons, the customer
must inform the Manufacturer.
Cod:
CABINET
Illuminazione
Lighting
Resist. condensa
Condensation heater
Corrente
Rated current
Volume netto
Net volume
Potenza elettrica
Electric power
ARM
Sbrinamento elettrico
Electric defrost
3.2. INTENDED USE
The equipment covered by this manual is a REFRIGERATED CABINET for professional use belonging to the
PERFEKT | PERFEKT PLUSline. It has been designed and built for storing food and/or pharmaceutical products.
The Manufacturer cannot be held liable for uses other than those indicated.
Do not use this equipment to store products other than those intended. Do not store
explosive substances, such as pressurised containers with flammable propellants, in this
appliance.
The equipment cannot be used for the storage of medicine, blood and blood derived
products.
USE AND MAINTENANCE MANUAL
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
19
EN
3.3. DESCRIPTION
The equipment covered by this manual is a REFRIGERATED CABINET for professional use, for internal use, to be used
for the storage of food and/or pharmaceutical products.
it is available in the following versions:
▪TN normal temperature with temperature operation 0°C / +10°C
▪TN Plus normal temperature with temperature operation -2°C / +8°C
▪BT normal temperature with temperature operation -18°C / -22°C
▪With blind doors or with glass doors with automatic magnetic closure
▪With monoblock unit - With built-in condensing unit
▪In monoblock version for connection to a remote unit
▪Electronic control controller and main switch
▪Standard supply voltage 230V - 1 - 50Hz
The external and internal structure is made of Stainless Steel while the external bottom is made of Galvanised steel. The tank
insulation is made with expanded polyurethane resins with a density of 38-42 Kg/m3. The power supply is provided via an
electric cable already prepared by the manufacturer.
The tank insulation is made without the use of CFCs with a low environmental impact.
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
20
3.4. MAIN COMPONENTS
POS. ELEMENT NOTES
1 MAIN SWITCH
2 CONTROL PANEL
3 BLIND DOOR (or GLASS DOOR) Available with blind door or with glass door.
4 STEEL SUPPORT HOOKS FOR GRID
5 GRATING SURFACE
6 STAINLESS STEEL ADJUSTABLE FEET Optional: LOCKABLE WHEELS.
7 DOOR GASKET
8 LED LAMP For BLIND DOORS.
9 FAN STOP
10 DELIVERY GRID
11 SUCTION GRID
12 DOOR EDGE RESISTANCE Present in the BT version to prevent the door from freezing.
13 REFRIGERATING UNIT
14 IDENTIFICATION PLATE
The refrigerated cabinet door can be mounted on both sides. Should moving the door to the other side be required, the
appropriate KIT provided by the Manufacturer must be purchased. For the operating procedure, refer to paragraph “Door
disassembly and assembly on the other side”.
8 9
10
11
12
3
2
1
4
5
67
13
14
USE AND MAINTENANCE MANUAL
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
21
EN
3.4.1. REFRIGERATING UNIT
The built-in refrigerating unit consists of:
▪compressor
▪air condenser
▪evaporator
▪condenser fan
▪evaporator fan
▪defrosting resistance on BT version evaporator
▪condensate water automatic evaporation
3.4.2. OPTIONAL - REMOTE SET-UP MONOBLOCK UNIT
The monoblock unit with remote set-up is composed of:
▪evaporator
▪evaporator fan
▪condensate water discharge siphon
In the BT and PLUS version, the evaporator is equipped with a
defrosting resistance.
The remote unit must be placed away from atmospheric agents,
avoiding using the site where it is installed as a deposit for
materials that would prevent correct air circulation.
Depending on the characteristics of the remote condenser unit
model, the spaces from the wall or other obstacles must be
respected so that there is a sufficiently adequate air exchange
that ensures correct operation of the refrigerator cabinet and
easy maintenance.
condensate
drain
REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
22
4. RECEPIT AND HANDLING
4.1. EQUIPMENT RECEIPT
The equipment is delivered on 4 easily removable plastic caps.
Upon delivery, check that the packaging is intact and that it
has not been damaged during transport.
4.1.1. HANDLING WITH PACKAGING
The product unloading/loading operations must be carried out by authorised and qualified
personnel. The company shall not be liable for failure to comply with the safety regulations
in force on the subject.
The packaging containing the refrigerated cabinet must always be handled in a vertical position (Top-Bottom
indications on the packaging).
YES NO
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Tecnodom Frigorifero
