Tektronix TDS3TMT Manuale utente
User Manual
TDS3TMT
Telecom Mask Test
Application Module
071-0648-02
*P071064802*
071064802
Copyright ETektronix. All rights reserved. Licensed software
products are owned by Tektronix or its subsidiaries or suppliers,
and are protected by national copyright laws and international
treaty provisions.
Tektronix products are covered by U.S. and foreign patents,
issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and
price change privileges reserved.
TEKTRONIX, TEK, TEKPROBE, and TekSecure are registered
trademarks of Tektronix, Inc.
DPX, WaveAlert, and e*Scope are trademarks of
Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
HIn North America, call 1-800-833-9200.
HWorldwide, visit www.tektronix.com to find contacts in
your area.
1
Contents
Safety Summary 2.............................
Installing the TDS3TMT Application Module 5........
Telecom Mask Test Features 5...................
Accessing TDS3TMT: QuickMenu 6................
Accessing TDS3TMT: Utility Menu 7...............
Conventions 8...............................
TDS3TMT Menu 9.............................
Telecom Pass/Fail Mask Test Example 24............
2
Safety Summary
To avoid potential hazards, use this product only as
specified. While using this product, you may need to
access other parts of the system. Read the General Safety
Summary in other system manuals for warnings and
cautions related to operating the system.
Preventing Electrostatic Damage
CAUTION. Electrostatic discharge (ESD) can
damage components in the oscilloscope and its
accessories. To prevent ESD, observe these
precautions when directed to do so.
Use a Ground Strap. Wear a grounded antistatic wrist strap
to discharge the static voltage from your body while
installing or removing sensitive components.
UseaSafeWorkArea.Do not use any devices capable of
generating or holding a static charge in the work area
where you install or remove sensitive components.
Avoid handling sensitive components in areas that have a
floor or benchtop surface capable of generating a static
charge.
3
Handle Components Carefully. Do not slide sensitive
components over any surface. Do not touch exposed
connector pins. Handle sensitive components as little as
possible.
Transport and Store Carefully. Transport and store sensitive
components in a static-protected bag or container.
Manual Storage
The oscilloscope front cover has a convenient place to
store this manual.
4
5
Installing the TDS3TMT Application Module
Refer to the TDS3000, TDS3000B, and TDS3000C
Series Application Module Installation manual for
instructions on installing and testing the application
module.
Telecom Mask Test Features
The TDS3TMT application module adds waveform
mask testing capabilities to your oscilloscope. This
section provides an overview of these additional features.
Telecom Mask Test QuickMenu
Use the telecom mask test QuickMenu function to
display bottom and side menus that provide access to all
key mask test functions from one screen.
Predefined Telecom Industry Masks
The TDS3TMT application module provides compliance
masks for testing to ITU-G.703 and ANSI T1.102
telecommunications standards, up to STS-1 (52 Mb/s)
line rates.
Multiple Channel Testing
The TDS3TMT application module enables you to
perform multiple simultaneous testing on all active
oscilloscope channels.
6
Test Automation
You can connect the oscilloscope to do automated mask
testing by using the RS--232, GPIB, or LAN commu-
nication ports.
Accessing TDS3TMT: QuickMenu
1. Push the QuickMenu front-panel button to display
the quick menu items.
2. Push the Menu bottom screen button to select and
display the Telecom bottom and side menu items.
3. Push bottom and side menu buttons to select a mask,
set test control parameters, and test pass/fail
responses.
7
Accessing TDS3TMT: Utility Menu
1. Push the UTILITY front-panel button to display the
utility menu items.
2. Push the System bottom screen button to display
Apps.
3. Push the Module bottom screen button to select
Telecom. The screen displays the telecom bottom and
side menu items.
4. Push bottom and side menu buttons to select a mask,
set test control parameters, and test pass/fail
responses.
8
Conventions
The following conventions apply to all TDS3TMT
functions:
HYou can perform multiple waveform mask testing by
connecting signals to all oscilloscope input channels.
HWhile in Telecom Mask test mode, the AUTOSET
front-panel button automatically sets the oscilloscope
horizontal, vertical, and trigger parameters, and
positions the waveform in the selected mask.
HMask testing only works with live channels. It is
recommended that you turn off math and reference
waveforms while doing mask testing.
Indice
Altri manuali Tektronix Unità di controllo
Tektronix
Tektronix VX4286 Manuale utente
Tektronix
Tektronix KEITHLEY 7703 Manuale utente
Tektronix
Tektronix TM 5006 Manuale utente
Tektronix
Tektronix VX4237 Manuale utente
Tektronix
Tektronix 73A-270 Manuale utente
Tektronix
Tektronix ECO170A Manuale utente
Tektronix
Tektronix TM 502A Manuale utente
Tektronix
Tektronix ECO8000 Series Manuale utente
Tektronix
Tektronix VX4342 Manuale utente
Tektronix
Tektronix TDS3TRG Manuale utente
Tektronix
Tektronix KEITHLEY 4225-RPM Manuale utente
Tektronix
Tektronix 7B15 Manuale utente
Tektronix
Tektronix TM 503 Manuale utente
Tektronix
Tektronix 80E07 Manuale utente
Tektronix
Tektronix VX4790A Manuale utente
Tektronix
Tektronix 80A01 Manuale utente
Tektronix
Tektronix TM 506 Manuale utente
Tektronix
Tektronix TDS3FFT Manuale utente
Tektronix
Tektronix TM 501 Manuale utente
Tektronix
Tektronix TM 5003 Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
