Tektronix AMM768 Manuale utente
Instructions
AMM7UP Upgrades
AMM768 Audio Multi-Channel Monitor
075-0936-00
*P075093600*
075093600
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.
www.tektronix.com
Copyright ©Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or
suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
HIn North America, call 1-800-833-9200.
HWorldwide, visit www.tektronix.com to find contacts in your area.
AMM7UP Upgrades i
Table of Contents
General Safety Summary iii...................................
Service Safety Summary v....................................
Kit Description 1............................................
Products 1.......................................................
Required Tools 2..................................................
Kit Parts Lists 2...................................................
Upgrade Installation 5.......................................
Verify the Currently Installed Options 5................................
How to Prevent Electrostatic Discharge 5...............................
Install the Software Upgrade 6.......................................
Install the Hardware Upgrade 10.......................................
Install the Software Option Key 15.....................................
Apply the Option Label 16..........................................
Verify the Upgrade 17.........................................
Table of Contents
ii AMM7UP Upgrades
AMM7UP Upgrades iii
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions related to operating the system.
Use Proper Power Cord. Use only the power cord specified for this product and
certified for the country of use.
Connect and Disconnect Properly. Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
Ground the Product. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Power Disconnect. The power cord disconnects the product from the power
source. Do not block the power cord; it must remain accessible to the user at all
times.
Do Not Operate Without Covers. Do not operate this product with covers or panels
removed.
Do Not Operate With Suspected Failures. If you suspect there is damage to this
product, have it inspected by qualified service personnel.
Avoid Exposed Circuitry. Do not touch exposed connections and components
when power is present.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation. Refer to the manual’s installation instructions for
details on installing the product so it has proper ventilation.
ToAvoidFireor
Personal Injury
General Safety Summary
iv AMM7UP Upgrades
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
These terms may appear on the product:
HDANGER indicates an injury hazard immediately accessible as you read the
marking.
HWARNING indicates an injury hazard not immediately accessible as you
read the marking.
HCAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
CAUTION
Refer to Manual
Protective Ground
(Earth) Terminal
Terms in this Manual
Symbols and Terms
on the Product
AMM7UP Upgrades v
Service Safety Summary
Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary before performing any service
procedures.
Do Not Service Alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect Power. To avoid electric shock, disconnect the power cord from the
mains power.
Use Care When Servicing With Power On. Dangerous voltages or currents may
exist in this product. Disconnect power, remove battery (if applicable), and
disconnect test leads before removing protective panels, soldering, or replacing
components.
To avoid electric shock, do not touch exposed connections.
Service Safety Summary
vi AMM7UP Upgrades
AMM7UP Upgrades 1
Kit Description
This document provides instructions for installing the audio and video upgrades
listed below into an existing Tektronix AMM768 Audio Multi-Channel Monitor.
Table 1: Supported upgrades
Upgrade options Description
Option AD Adds support for analog audio monitoring and digital audio monitoring (embedded and AES/EBU inputs).
Option DD Adds support for decoding Dolby Digital (AC-3), digital audio monitoring (embedded and AES/EBU
inputs), and for analog audio monitoring.
Option DDE Adds support for decoding Dolby E and Dobly Digital (AC-3), and for digital (embedded and AES/EBU
inputs) and analog audio monitoring. Supports digital ASUI formats with up to eight channels.
Option SDI Provides audio de-embedding and Tektronix exclusive HD/SD picture, closed caption, and video session
displays.
Products
The following Tektronix products are supported by this kit:
AMM768 All instruments
Kit Description
2AMM7UP Upgrades
Required Tools
The following table listed the tools required to install the upgrade:
Table 2: Required tools
Name Description
TORX screwdriver handle Accepts TORX-driver bits
T-10 and T-15 TORX tips TORX-driver bit for T-10 and T-15 screw heads
Anti-static wrist strap
AMM768 Audio Multi-Channel Monitor
Specifications and Performance Verification
Technical Reference and appropriate test
equipment listed in the recommended test
equipment tables
071-2174-xx
Available from the Tektronix Web site
Kit Parts Lists
The following tables list the parts supplied with each upgrade kit. Before you
start the upgrade, verify that you received all of the parts for the upgrade kit you
ordered.
Table 3: Option AD parts list
Quantity Part number Description
1EA -- -- -- -- -- -- ENVELOPE, IMPORTANT DOCUMENTS; CONTAINS
SOFTWARE OPTION KEY
1EA 075-0936-00 INSTRUCTIONS; AMM7UP UPGRADES
1EA 131-7430-XX CONN, DSUB; SLDR CUP, MALE, STR, 62 POS
1EA 672-6307-XX CIRCUIT BD SUBASSY; DIGITAL AND ANALOG AUDIO
Figure 1: Option AD module
AMM7UP AD
Altri manuali per AMM768
1
Indice
Altri manuali Tektronix Apparecchiature di prova
Tektronix
Tektronix 067-0883-99 Manuale utente
Tektronix
Tektronix TDS5000B Series Manuale utente
Tektronix
Tektronix 3A74 Manuale utente
Tektronix
Tektronix 1A2 Manuale utente
Tektronix
Tektronix TMT4 Manuale utente
Tektronix
Tektronix MDO4104-6 Manuale utente
Tektronix
Tektronix 3 Series Manuale utente
Tektronix
Tektronix P6101B Manuale utente
Tektronix
Tektronix TDS 220 Manuale di riferimento
Tektronix
Tektronix TBS1000 Series Guida all'installazione
Tektronix
Tektronix 321 A Manuale utente
Tektronix
Tektronix MSO4000B Series Manuale utente
Tektronix
Tektronix DPO70000 Series Manuale per l'uso e la cura
Tektronix
Tektronix RSA5100B series Manuale utente
Tektronix
Tektronix TDS3012C Manuale utente
Tektronix
Tektronix TG8000 Manuale utente
Tektronix
Tektronix 485 Manuale utente
Tektronix
Tektronix 434 Manuale utente
Tektronix
Tektronix SG 505 Manuale utente
Tektronix
Tektronix MDO4000C Series Manuale utente
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
