Teldat Regesta Lite AU Manuale utente

Regesta Lite AU

Installation Manual

Teldat S.A. Manual

Regesta Lite AU 1

Legal Notice

Warranty

This publication is subject to change.

Teldat S.A. offers no warranty whatsoever for the information contained in this manual.

Teldat S.A. is not liable for any direct, indirect, collateral, consequential or any other damage connected to the deliv-

ery, supply or use of this manual.

Manual Teldat S.A.

2Regesta Lite AU

Table of Contents

I RelatedDocuments................................. 1

Chapter1 AboutThisManual................................. 2

1.1 SupportedDevices................................... 2

1.2 Who should read this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 When should this manual be read? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.4 Whatisinthismanual?................................. 2

1.5 Whatisnotinthismanual? ............................... 2

1.6 How is the information organized? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.7 TechnicalSupport ................................... 2

Chapter 2 Regesta Lite AU Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Features........................................ 4

2.1.1 Powersupply ..................................... 4

2.1.2 HardwareMonitoring.................................. 4

Chapter 3 Components and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.1 Components...................................... 5

3.1.1 FrontPanel...................................... 5

3.1.2 RearPanel ...................................... 7

3.1.3 UndersidePanel.................................... 7

3.1.4 UpperPanel...................................... 8

3.2 Assembly....................................... 8

3.2.1 Installing a DIN rail mount accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.2.2 InstallingtheProtector.................................. 9

3.3 PowerSource.................................... 10

3.3.1 PowerBuffer..................................... 10

3.3.2 Workplace Conditions. Main Characteristics . . . . . . . . . . . . . . . . . . . . . . . 10

3.3.3 Connecting the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.3.4 Connecting ..................................... 11

3.3.5 Disconnecting.................................... 11

3.4 RSTButton..................................... 11

3.4.1 Restartingthedevice................................. 11

3.4.2 DefaultConfiguration................................. 12

3.5 Connectingthedata.................................. 12

3.5.1 2-PortEthernetSwitch ................................ 12

3.5.2 WWAN Antenna Connection (RF connectors) . . . . . . . . . . . . . . . . . . . . . . 12

Teldat S.A. Table of Contents

Regesta Lite AU i

3.5.3 Connecting the Serial Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.6 InstallingtheSIMcard................................. 14

3.6.1 IdentifyingtheSIMtrays................................ 15

3.6.2 Procedure to install the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Appendix A Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

A.1 Troubleshooting................................... 17

A.2 Updatingthesoftware................................. 17

A.2.1 Connectingtotherouter................................ 18

A.3 Connectors ..................................... 19

A.3.1 LANConnector.................................... 19

A.3.2 WWAN/Cell Connector (female) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

A.3.3 ConfigurationConnector................................ 20

A.3.4 RS-232 Serial Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

A.3.5 RS-485 Serial Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

A.4 TechnicalSpecifications................................ 20

A.4.1 LANInterface .................................... 21

A.4.2 WirelessWANInterface................................ 21

A.4.3 ConfigurationInterface ................................ 21

A.4.4 RS-232SerialInterface................................ 21

A.4.5 RS-485SerialInterface................................ 21

A.4.6 PowerSupply.................................... 21

A.4.7 PowerBuffer..................................... 22

A.4.8 Dimensionsandweight................................ 22

A.4.9 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

AppendixB Safetyinformation ................................ 23

B.1 Recycling and the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

B.2 Translated Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Table of Contents Teldat S.A.

ii Regesta Lite AU

I Related Documents

Teldat-Dm748-I Software Updating

Teldat-Dm781-I Cellular Interface

Teldat S.A. Related Documents

Regesta Lite AU 1

Chapter 1 About This Manual

This is the installation manual for the Regesta Lite AU router and contains information on how to correctly install this

device in a working environment.

1.1 Supported Devices

The information provided in this installation manual only applies to the Regesta Lite AU router, models 2G / 3G.

1.2 Who should read this manual?

This manual should be read by the support personnel who need to install, configure, maintain and monitor the

device.

1.3 When should this manual be read?

Read this guide as soon as you are ready to familiarize yourself with the device and its components.

This manual will help you understand your new device in greater depth.

1.4 What is in this manual?

This installation guide contains the following information:

• A description of the available features in the Regesta Lite AU.

• Technical specifications.

• Power supply requirements.

• A description of the device LEDs and connectors.

• Troubleshooting.

1.5 What is not in this manual?

This manual does not contain information relative to the device software or its configuration. For information on how

to configure this device, please see the relevant protocol manuals, which can be found on the Teldat website: ht-

tp://www.teldat.com

1.6 How is the information organized?

Each chapter focuses on a specific part of the hardware and its components. All descriptive, technical specifications

and information on a component can be found in the relevant chapter.

1.7 Technical Support

Teldat S.A. offers a technical support service. Device software can be upgraded on a regular basis for maintenance

purposes and for new features.

Contact information:

Web: http://www.teldat.com

Tel.: +34 918 076 565

Fax: +34 918 076 566

1 About This Manual Teldat S.A.

2Regesta Lite AU

Email: suppor[email protected]

Teldat S.A. 1 About This Manual

Regesta Lite AU 3

Chapter 2 Regesta Lite AU Router

2.1 Features

The Regesta Lite AU router family is a range of IP routers especially designed to operate in hostile and extreme en-

vironments. Thanks to their ruggedized mechanics and special characteristics, which allow them to bear extreme

temperatures, these routers are particularly suited for: industrial environments, industrial telecontrol, distribution in-

stallations for electricity, gas, water, etc.

The main characteristic of this router family lies in the possibility of accessing WirelessWAN (WWAN) data networks.

Thanks to its module design, this device can quickly adapt to the latest WWAN technologies. The Regesta Lite AU

family is compatible with wireless technologies such as GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+, LTE,

CDMA 2000 1xRTT, CDMA Ev-Do. The basic license makes connection through the GPRS/EDGE technology pos-

sible. Additional licenses allow technologies with a wider bandwidth to be supported. The device also has space for 2

SIM cards: one active SIM and the other used as backup.

As for LAN networks, this device incorporates a 2 port 10/100 BaseT LAN Ethernet Switch.

The device’s RS-232 console port can be configured as a DCE asynchronous serial communications port with a

maximum speed of 38400 bps and without control signals. The device can incorporate two additional asynchronous

serial ports with a maximum speed of 115200 with DCE RS-232 technology or with RS-485 2-4 wires/RS-422. The

serial port connectors are DB9.

The device incorporates a transparent protector that prevents connectors from being touched while the device is run-

ning.

Fig. 1: Regesta Lite AU

2.1.1 Power supply

For further information on the Regesta Lite AU power supply, please see Power Source on page 10.

2.1.2 Hardware Monitoring

The only way to monitor the Regesta Lite AU hardware is through the LEDs on the front panel. The LEDs provide

visual information on what is happening in the device. They indicate the state of the hardware components, if there is

connectivity, data flow, etc.

For further information on the LEDs panel, please see section LEDs on page 6.

2 Regesta Lite AU Router Teldat S.A.

4Regesta Lite AU

Chapter 3 Components and Power Supply

The following chapter provides detailed information on the chassis of the Regesta Lite AU router and its compon-

ents. This information includes:

• Components

• Assembly instructions

• Power supply

• RST button

• Data connection

• SIM card installation

3.1 Components

3.1.1 Front Panel

The following figure shows the front panel.

Fig. 2: Front Panel

The front panel elements are as follows:

Front Panel Elements

Item Description

A RF2. WWAN antenna connector.

B RST. Reset button. For further information on how the reset button works, please see RST

Button on page 11

C 2-port Fast Ethernet Switch

D CONF. DB9 connector providing access to the device local console for configuration and

monitoring purposes. (This connector can also be used as an RS-232 asynchronous DCE

serial port).

E RF1. WWAN antenna connector.

F I/O. ON/OFF power switch, position I for ON and position O to switch it OFF.

G POWER. Power connection. For further information on the power connection, please see

section Power Source on page 10.

In addition to the connectors, the front panel also contains a set of LEDs that provide information on the state of the

router.

Teldat S.A. 3 Components and Power Supply

Regesta Lite AU 5

3.1.1.1 LEDs

The LEDs are located, as shown in the following figure, on the router front panel:

Fig. 3: Front Panel LEDs

While the device is in startup mode, LED “L” lights up in green. Once the device has started up, the LEDs indicate

the following:

LEDs

LED Associated Inter-

face

Status Description

SCellular interface Green

Amber

SK1 operating SIM. This processes traffic through the carrier

for the SIM installed in this tray.

SK2 operating SIM. This processes traffic through the carrier

for the SIM installed in this tray.

CCellular interface Red

Amber

Green

Cellular interface is unavailable, not installed or not registered.

The device has registered in the network and is in process of

establishing the PPP protocol.

The device is registered, PPP is established and it can send

IP traffic through the PPP interface.

• Steady: Data is not being transferred.

• Flashing: Data is being transferred.

LCellular interface Green

Yellow

Red

Off

Coverage level above -90dBm.

Coverage level between -90dBm and -100dBm.

Coverage level below -100dBm.

Cellular interface is not active.

100 Associated to each

Ethernet switch

connector

(LAN1..LAN2)

Amber ON -> Connection at 100Mbps.

OFF -> Connection at 10Mbps.

LNK Associated to each

Ethernet switch

connector

(LAN1..LAN2)

Green ON -> Ethernet connection (link) established:

• Steady: Data is not being transferred.

• Flashing: Data is being transferred.

OFF -> Ethernet connection is not established

3 Components and Power Supply Teldat S.A.

6Regesta Lite AU

Indice

Altri manuali Teldat Router di rete

Teldat

Teldat C1+L Manuale utente

Teldat

Teldat H1 HSDPA Manuale utente

Teldat

Teldat M8-Smart Manuale utente

Teldat

Teldat Atlas-i70 Manuale utente

Teldat

Teldat ATLAS 150 Manuale utente

Teldat

Teldat 4Ge Manuale utente

Teldat

Teldat iM8-Cx Manuale utente

Teldat

Teldat ATLAS 300 Manuale utente

Teldat

Teldat G1N Manuale utente

Teldat

Teldat H2 RAIL Lite Manuale utente

Teldat

Teldat ATLAS 60 NW Manuale utente

Teldat

Teldat Regesta-PRO ER B Manuale utente

Teldat

Teldat RS1800 Series Manuale utente

Teldat

Teldat iM8 Manuale utente

Teldat

Teldat T200 Manuale utente

Teldat

Teldat Connect-4GePlus Manuale utente

Teldat

Teldat H2 RAIL Manuale utente

Teldat

Teldat Connect-FW Manuale utente

Teldat

Teldat K Seres Manuale utente

Teldat

Teldat Atlas 250 Manuale utente

Teldat

Teldat C+ Series Manuale utente

Teldat

Teldat Atlas 250 Manuale utente

Teldat

Teldat Teldat V Manuale utente

Teldat

Teldat 4Ge Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza