Telit Wireless Solutions LN940A11 SERIES Manuale utente

LN940 SERIES AT Command

User Guide

80591ST10886A Rev. 2 – 2018-07-02

80591ST10886A Rev.2 Page 2of 200 2018-07-02

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

NOTICES LIST

While reasonable efforts have been made to assure the accuracy of this document, Telit assumes

no liability resulting from any inaccuracies or omissions in this document, or from use of the

information obtained herein. The information in this document has been carefully checked and is

believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit

reserves the right to make changes to any products described herein and reserves the right to

revise this document and to make changes from time to time in content hereof with no obligation

to notify any person of revisions or changes. Telit does not assume any liability arising out of the

application or use of any product, software, or circuit described herein; neither does it convey

license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Telit products

(machines and programs), programming, or services that are not announced in your country. Such

references or information must not be construed to mean that Telit intends to announce such Telit

products, programming, or services in your country.

COPYRIGHTS

This instruction manual and the Telit products described in this instruction manual may be, include

or describe copyrighted Telit material, such as computer programs stored in semiconductor

memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors

certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce

in any form, distribute and make derivative works of the copyrighted material. Accordingly, any

copyrighted material of Telit and its licensors contained herein or in the Telit products described

in this instruction manual may not be copied, reproduced, distributed, merged or modified in any

manner without the express written permission of Telit. Furthermore, the purchase of Telit

products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any

license under the copyrights, patents or patent applications of Telit, as arises by operation of law

in the sale of a product.

COMPUTER SOFTWARE COPYRIGHTS

The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may

include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor

memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd

Party supplied SW certain exclusive rights for copyrighted computer programs, including the

exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly,

any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit

products described in this instruction manual may not be copied (reverse engineered) or

80591ST10886A Rev.2 Page 3of 200 2018-07-02

reproduced in any manner without the express written permission of Telit or the 3rd Party SW

supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly

or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent

applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty

free license to use that arises by operation of law in the sale of a product.

80591ST10886A Rev.2 Page 4of 200 2018-07-02

USAGE AND DISCLOSURE RESTRICTIONS

I. License Agreements

The software described in this document is the property of Telit and its licensors. It is furnished by

express license agreement only and may be used only in accordance with the terms of such an

agreement.

II. Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited

by law. No part of the software or documentation may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language or computer language, in any form or

by any means, without prior written permission of Telit

III. High Risk Materials

Components, units, or third-party products used in the product described herein are NOT fault-

tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment

in the following hazardous environments requiring fail-safe controls: the operation of Nuclear

Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support,

or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any

expressed or implied warranty of fitness for such High Risk Activities.

IV. Trademarks

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service

names are the property of their respective owners.

V. Third Party Rights

The software may include Third Party Right software. In this case you agree to comply with all

terms and conditions imposed on you in respect of such separate software. In addition to Third

Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall

apply to the Third Party Right software.

TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY

THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS

INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE

SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL

THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT

LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A

PARTICULAR PURPOSE.

80591ST10886A Rev.2 Page 5of 200 2018-07-02

NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER

MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT

OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS

GRANTED UNDER EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE

TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

80591ST10886A Rev.2 Page 6of 200 2018-07-02

APPLICABILITY TABLE

PRODUCTS

SW Versions

Modules

LN940A11 SERIES T77W676.0.0.3.7 LTE

LN940A9 SERIES T77W676.0.0.3.9

80591ST10886A Rev.2 Page 7of 200 2018-07-02

CONTENTS

NOTICES LIST................................................................................................2

COPYRIGHTS.................................................................................................2

COMPUTER SOFTWARE COPYRIGHTS.......................................................2

USAGE AND DISCLOSURE RESTRICTIONS................................................4

APPLICABILITY TABLE.................................................................................6

CONTENTS.....................................................................................................7

1. INTRODUCTION.........................................................................15

Scope..........................................................................................15

Audience .....................................................................................15

Contact Information, Support.......................................................15

SYNTAX......................................................................................16

1.1. AT Command Syntax...................................................................16

BASIC COMMANDS...................................................................17

3.1.

Repeat Previous Command Line: A/............................................17

ITU-T V.25TER DTE-DCE INTERFACE COMMAND..................18

4.1.

ATS3 Command Line Termination..............................................18

4.2.

ATS4 Response Formatting........................................................19

4.3.

ATS5 Command Line Editing......................................................19

4.4.

ATE AT Command Echo ............................................................20

4.5.

ATQ Result Code Presentation Mode.........................................20

4.6.

ATV Result Code Format Mode..................................................21

4.7.

ATX Connect Result Code Format..............................................21

4.8.

AT&W Store AT Command Setting to User Defined Profile ........22

4.9.

AT&E Store AT Command Setting to User Defined Profile .........22

4.10.

AT+ICF DTE-Modem Character Framing ...................................23

80591ST10886A Rev.2 Page 8of 200 2018-07-02

4.11.

AT+IFC DTE-Modem Local Flow Control....................................24

4.12.

ATZ Restore AT Command Settings from User Defined Profile..25

4.13.

AT&F Reset AT Command Settings to Factory Default Values...25

4.14.

ATI Display Product Identification Information.............................26

4.15.

AT+GMI Display Manufacturer Identification...............................27

4.16.

AT+GMM Display Model Identification........................................27

4.17.

AT+GMR Display Revision Identification ....................................28

4.18.

AT+GSN Display Serial Number.................................................28

4.19.

AT+GCAP Display Product Capabilities List...............................29

4.20.

ATS2 Escape Character.............................................................30

4.21.

ATS7 Connection Completion Time-Out.....................................30

4.22.

ATS8 Comma Dial Pause Time..................................................31

4.23.

ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier 31

4.24.

ATS30 Disconnect Inactivity Timer.............................................32

4.25.

AT\V Single Line Connect Message ...........................................32

4.26.

AT\S Requests AT Command Settings.......................................33

4.27.

AT%V Requests Revision Identification......................................33

UMTS GENERAL COMMANDS..................................................34

5.1.

AT+CGMI Request Manufacturer Identification...........................34

5.2.

AT+CGMM Request Model Identification....................................34

5.3.

AT+CGMR Request Revision Identification of Software Status...34

5.4.

AT+CGSN Request International Mobile Equipment Identity ......35

5.5.

AT+CSCS Character Set............................................................35

5.6.

AT+CIMI Request International Mobile Subscriber Identity.........36

UMTS CALL CONTROL COMMANDS.......................................37

6.1.

AT+WS46 Select Wireless Network............................................37

6.2.

AT+CSTA Select Type of Address..............................................37

6.3.

AT+CMOD Set Call Mode...........................................................38

80591ST10886A Rev.2 Page 9of 200 2018-07-02

6.4.

AT+CBST Select Bearer Service Type.......................................39

6.5.

AT+CRLP Configure RLP Parameters for Outgoing Non-Transparent Data Calls

6.6.

AT+CR Service Reporting Control..............................................42

6.7.

AT+CEER Service Reporting Control .........................................43

6.8.

AT+CRC Set Cellular Result Codes for Incoming Call Indication43

6.9.

AT+CHSN HSCSD Non-Transparent Call Configuration.............44

6.10.

AT+CGPIAF IPV6 Format...........................................................45

6.11.

AT+CSTF Settings Time Format.................................................47

6.12.

AT+CSDF Settings Date Format.................................................47

6.13.

AT+CUAD UICC Application Discovery ......................................49

6.14.

AT+CEAP EAP authentication....................................................50

6.15.

AT+CERP EAP Retrieve Parameters .........................................51

ITU-T V.25TER CALL CONTROL COMMANDS.........................54

7.1.

ATH Disconnect Existing Data Connection.................................54

NETWORK SERVICE-RELATED COMMANDS .........................55

8.1.

AT+CNUM Subscriber Number...................................................55

8.2.

AT+CREG Network Registration Report.....................................55

8.3.

AT+COPS PLMN Selection ........................................................56

8.4.

AT+CLCK Facility Lock/Unlock...................................................58

8.5.

AT+CPWD Set New Password...................................................60

8.6.

AT+COPN Read Operator Names..............................................60

8.7.

AT+CPLS Selection of Preferred PLMN List...............................61

MOBILE EQUIPMENT COMMANDS ..........................................62

9.1.

AT+CPAS Phone Activity Status.................................................62

9.2.

AT+CFUN Set Phone Functionality ............................................62

9.3.

AT+CPIN Enter PIN....................................................................63

9.4.

AT+CSQ Signal Quality..............................................................64

80591ST10886A Rev.2 Page 10 of 200 2018-07-02

9.5.

AT+CCLK Sets Clock .................................................................65

9.6.

AT+CSIM Generic SIM Access...................................................66

9.7.

AT+CRSM Restricted SIM Access..............................................67

9.8.

AT+CLAC Available AT Commands ...........................................68

9.9.

AT+CTZU Automatic Time Zone Update....................................69

9.10.

AT+CTZR Time Zone Reporting.................................................70

9.11.

AT+CMEE Report Mobile Termination error ...............................70

10.

UMTS-SPECIFIC PACKET DOMAIN COMMANDS....................72

10.1.

AT+CGDCONT Define PDP Context..........................................72

10.2.

AT+CGDSCONT Define Secondary PDP Context......................74

10.3.

AT+CGTFT Traffic Flow Template..............................................75

10.4.

AT+CGQREQ Quality Of Service Profile (Requested)................77

10.5.

AT+CGQMIN Quality Of Service Profile (Minimum acceptable)..78

10.6.

AT+CGEQREQ 3G Quality Of Service Profile (Requested)........79

10.7.

AT+CGEQMIN 3G Quality Of Service Profile (Minimum acceptable)82

10.8.

AT+CGATT PS Attach Or Detach...............................................86

10.9.

AT+CGACT Activates or Deactivates Specified PDP..................87

10.10.

AT+CGDATA Enter Data State...................................................88

10.11.

AT+CGPADDR Show PDP Address...........................................89

10.12.

AT+CGEREP Packet Domain Event Reporting ..........................90

10.13.

AT+CGSMS Select Service for MO SMS Messages...................91

10.14.

AT+QCGEQMIN 3G Quality of Service Profile(Minimum Acceptable) 92

10.15.

AT+QCGEQOS Define EPS Quality of Service ..........................92

10.16.

AT+QCGEQREQ 3G Quality of Service Profile (Requested)......92

10.17.

AT+QCGQMIN Quality of Service Profile (Minimum Acceptable)92

10.18.

AT+QCGQREQ Quality of Service Profile (Requested)..............92

10.19.

AT+QCGTFT Taffic Flow Template............................................92

11.

LTE-SPECIFIC PACKET DOMAIN MODEM COMPATIBILITY COMMANDS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Telit Wireless Solutions Unità di controllo

Telit Wireless Solutions

Telit Wireless Solutions JF2 Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions WL865E4-P Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions LE940B6-NA AUTO Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions NL865H2 Series Guida

Telit Wireless Solutions

Telit Wireless Solutions HE910-EUG V2 Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions GE864-AUTO Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions NE310H2 Guida

Telit Wireless Solutions

Telit Wireless Solutions GE310-GNSS Guida

Telit Wireless Solutions

Telit Wireless Solutions FN980 Guida

Telit Wireless Solutions

Telit Wireless Solutions FN980m TLB Guida

Telit Wireless Solutions

Telit Wireless Solutions UE866-N3G Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions NE866B1 Guida

Telit Wireless Solutions

Telit Wireless Solutions UC864-E Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions BlueMod+S42/AI Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions LM940 Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions GE910 Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions GE866-QUAD Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions ZE51-2.4 Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions LE910C1-NA Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions NE310L2 Guida

Telit Wireless Solutions

Telit Wireless Solutions SE867-AGPS Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions WE922-3GR Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions GainSpan GS2K Series Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions LE915A P Series Guida

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente