Telit Wireless Solutions WE310F5-I Manuale utente

1VV0301671, Rev 6

This Quick Start Guide will walk you through the easy

steps required to setup and run the Serial-to-Wireless

application.

WE310F5 module evaluation board has two variants:-

- WE310F5-I has antenna mounted on the module; &

- WE310F5-P has only RF PAD and requires external

antenna.

To work with one the above boards you will need the

following items:

• Quick Start Guide (this document)

• WE310F5 Evaluation Board

• 1 Micro-USB Cable

• Antenna in case the “WE310F5-P” module

• Programming tools and binaries

• Below are the ports required for Program & Run mode:

- UART0 Port: Run Mode

- UART1 Port: Programming Mode

WE310F5-I/P Evaluation

Board

Quick Start Guide

WE310F5-I Evaluation Board

The external antenna variant WE310F5-P EVB has the

RF connector as show in the figure below:

WE310F5-P Evaluation Board

1 Program the WE310F5 Module

Step 1 Plug a micro-USB cable: one end of the USB

cable to USB power port on the WE310F5 EVB and the

other end of the USB to the PC or laptop.

Step 2 Turn the PROGRAM/RUN switch to

PROGRAM.

Step 3 Downloaded the package “39.00.000-B017.zip”

from Telit Download Zone and unzip the folder:

https://www.telit.com/wp-content/uploads/2021/01/

Telit_WE310F5_39.00.000-B017.zip

Browse into “Telit_Wifi_Image_Tool” sub-folder and launch

the “Telit_Wifi_Image_Tool.exe”.

Note: Please check and download the latest firmware

version from

https://www.telit.com/wp-content/uploads/2021/01/Telit_WE310F5_39.00.000-

B017.zip

1VV0301671, Rev 6

Step 5 Click on “Chip Select” option to download the

firmware to WE310F5.

Select the USB serial port for programming the module, in

this case it is COM67.

Then use the “Browse” button to select the s2w.bin file.

2 Run the WE310F5 Module

Step 1 After Flashing the image close the “Telit WiFi

image tool” window and turn the PROGRAM/RUN ⑦

switch to Run mode on the WE310F5 board, then discon-

nect the USB cable from UART1 and connect them to

UART0, switch the ON/OFF switch ⑭ to ON and you are

ready to use your WE310F5-I/P module.

Step 2 Open the Tera term or any other terminal applica-

tion and set the baud rate:

Once the baud rate is set, you are ready to issue the Basic

AT Commands to check the module.

1VV0301671, Rev 6

3 Wireless Operations

The following use cases describes the wireless operations

of the WE310F5 module. The WE310F5 module supports

two modes of operations:

• Station Mode

• Limited AP Mode

Station Mode

Following commands are used to configure the WE310F5

node in station mode. Associate the node to WPA2

Secured Wi-Fi network.

Where,

Module SSID is: roam3 and,

Passphrase is: 1234567890

AT+WNI=0 /*To set in station mode

AT+WNCN=1,"roam3","1234567890” /*To connect the

network to L3

Limited AP Mode

Following commands are used to configure the WE310F5

in AP Mode.

AT+WNI=1 /*To Set in AP Mode

AT+WNIPC=0,1,192.168.4.10,255.255.255.0,192.168.4.1

/*To configure the IP

AT+WNAPIPC=0,192.168.4.11,192.168.4.17,86440 /*To

configure the node in AP mode

1VV0301671, Rev 6

For information, please refer to the following documents:

• WE310F5 AT Command Reference Guide

- For detailed description of every AT command

• WE310F5 Module Hardware User Guide

- For detailed description of the hardware solutions for develop-

ing a product with Telit WL865E4-P module

• WE310F5 EVB User Guide

- For evaluation board description and hardware setup, jumper-

settings, component description, board specifications, and pin

outs

For further information, please visit the website link:

https://www.telit.com/products/wifi-and-bluetooth/#wifi

Technical and Product Support

For any clarification, technical and product support, please

email to Telit Technical Support at:

[email protected]

We recommend adding “Wi-Fi” in subject of the email. For

example, the subject of email can be “Wi-Fi: Association failing”,

“Wi-Fi: SPI Driver Issue”.

Also, in description of your email, please provide details about

the issue, product, module and use case including software

firmware version, module version and type, application being

used, customizations done to application, use case and issue

frequency and ability to recreate it.

Information

BlueTooth Peripheral Connection

Issue the following commands for DUT peripheral

connection:

Device 1

AT&W0

AT+YSR

AT+BI=1

AT+BICAP=0

AT+BADVINTMIN=60

AT+BADVINTMAX=60

AT+BADVE=1

AT+BATTRIB="pserv","uuid=1234"

AT+BATTRIB="char","prop=0x0c","uuid=5678"

AT+BATTRIB="charval","perm=0011","len=1","val=0x30"

AT+BATTRIB="complete"

AT+BOAD

AT+BI=1

AT+BCONINTMAX=1000

AT+BCONINTMIN=1000

AT+BCONNECT="00217E368'22","t2"

4 BlueTooth Operations

Station Mode

Issue the following commands in order to scan the

environment for available BT devices

AT+BI=1, enables the BT.

Altri manuali per WE310F5-I

Questo manuale è adatto per i seguenti modelli

Altri manuali Telit Wireless Solutions Scheda madre

Telit Wireless Solutions

Telit Wireless Solutions SC872-A Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions LE910C-EU Series Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB TLS Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions Bravo EVK Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manuale di installazione

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions Bravo Istruzioni per l'installazione e il funzionamento

Telit Wireless Solutions

Telit Wireless Solutions Jupiter SL869 Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions Bravo Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-V3 EVK Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions xE910 Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions JF2 EVK Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions WL865E4-P Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions CHARLIE Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions EVK2 Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SE878K3-A EVK Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions GainSpan GS2200M Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions EVB 2.0 Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions EVB Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SE868V2 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente