Tellabs FlexSym ONT205 Manuale utente

FlexSym-ONT205-Installation-Guide

Page 2 of 38

Tellabs®Information

The information in this publication is proprietary to Tellabs Enterprise, Inc.

No part of this publication may be used, disclosed, reproduced, adapted, translated, stored in a

retrieval system, or transmitted in any form or by any means, electronic or mechanical, for any

purpose, without the written permission of Tellabs Enterprise, Inc. Although every precaution

has been taken in the preparation of this publication, Tellabs Enterprise, Inc. assumes no (i)

responsibility for errors or omissions contained herein or (ii) liability for any damages resulting

from the use of information contained herein. Information in this publication is subject to change

without notice.

Trademarks

The following trademarks and service marks are owned by Tellabs Operations, Inc. or its

affiliates in the United States and/or other countries: TELLABS®, TELLABS and T symbol®,

T symbol®.

Any other company or product names may be trademarks of their respective companies.

Proprietary

This document is the property of Tellabs Enterprise, Inc. and contains confidential and

proprietary information owned by Tellabs Enterprise, Inc. Any copying, use, or disclosure of the

contents of this document, without the written permission of Tellabs Enterprise, Inc., is strictly

prohibited.

FlexSym-ONT205-Installation-Guide 
Page 3 of 38 
Table of Contents 
Tellabs®Information ......................................................................................................... 2 
Copyright.....................................................................................................................................2
Trademarks.................................................................................................................................2 
Proprietary..................................................................................................................................2
Tellabs® ONT205 Installation and Turnup Guide ......................................................... 4 
Description..................................................................................................................................6
Precautions...............................................................................................................................15 
Preparation ...............................................................................................................................17 
Installation ................................................................................................................................23 
Adding to Panorama PON Manager.......................................................................................32 
Contact Us ................................................................................................................................37 
 
 

FlexSym-ONT205-Installation-Guide

Page 4 of 38

Tellabs® ONT205 Installation and Turnup Guide

Introduction

This guide describes the Tellabs FlexSym ONT205 optical network terminal (ONT), its

features, specifications, status indicators and installation.

The FlexSym ONT205 is part of the Tellabs 1600 series of XGS-PON ONTs for passive

optical networks (PON). It is a compact desktop unit that also be mounted to most

surfaces using a wall mount bracket (optional). The FlexSym ONT205 is also plenum

rated for above ceiling applications.

When connected to a Tellabs 1100-series optical line terminal (1150/1150E, 1134, 1131,

OLT6, FlexSym OLT6, FlexSym OLT-mini) through a single fiber optic cable, the ONT

provides high-performance enterprise features, combined with cost, energy, and space

savings, all within the Tellabs exclusive high-security All Secure™ PON.

Document Revisions

Revision

Date

Notes

Revision A

November

2019

Initial Release

Revision B

January 2020

Update to Description, PoE Table

Intended Audience

This document is intended for technicians responsible for:

•Preparing the install location

FlexSym-ONT205-Installation-Guide

Page 5 of 38

•Unpacking and installing the ONT and any accessories

•Connecting the ONT to power and the PON network

•Provisioning services on the ONT

Related Documentation

N/A

FlexSym-ONT205-Installation-Guide

Page 6 of 38

Description

The Tellabs FlexSym ONT205 is part of the Tellabs 1600 series of ONTs for passive

optical networks (PON). It is a compact desktop unit that can also be mounted to most

any surface using an optional wall mounting bracket. It is also plenum rated for above

ceiling applications.

The FlexSym ONT205 provides flexible and symmetrical extended Ethernet connectivity

over a 10gigabit passive optical network at multi-rate Ethernet speeds of 1G, 2.5G, 5G

and 10G.

The FlexSym 205 provides Power over Ethernet (PoE) for the IEEE 802.3af, PoE+ IEEE

802.3at (Class-4 negotiations) and IEEE 802.3bt (4PPoE) standards. The maximum PoE

power available is 140 watts when locally powered and 90 watts when remotely

powered.

FlexSym-ONT205-Installation-Guide

Page 7 of 38

The FlexSym 205 can be deployed with the Tellabs OLT1150/OLT1150E, OLT1134AC,

OLT1131, OLT6 and the FlexSym OLT-mini optical line terminals.

Features

The FlexSym ONT205 supports the following features:

General Features

•Support for multicast GEM port for IPTV

•Wavelengths: Downstream 1580 nm, Upstream 1280 nm

•9.95328 Gbps burst mode upstream

•9.95328 Gbps downstream receive

•ITU-T G.9807.2 Amd1 Class N1

•APD receiver and DFB transmitter

•4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload

•Laser compliant FCC 47 CFR Part 15

•Class B and FDA 21 CFR 1040.10 and 1040.11, Class I

•Flexible mapping of GEM ports and TCONT with priority queue-based scheduling

•Activation with automatically discovered Serial Number (SN) and password

•Bi-directional AES-128 encryption with 60 second churning of keys

•Forward Error Correction (FEC)

•IP DSCP to 802.1p mapping

•Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1

standards

•SFF-type laser SC/APC connector

FlexSym-ONT205-Installation-Guide

Page 8 of 38

Ethernet Features

PoE has the capability of delivering 48 VDC over the same copper cable as Ethernet data

and provides up to 140 W of power for PoE-powered devices (PDs) when the ONT180C

is powered by the AC adapter.

•PoE: 802.3af/at, class 0-4, up to 30W per port on all ports

•PoE: Cisco UPoE Support with up to 60W on 3 high power ports.

•PoE: 802.3bt 4PPoE class 4, up to 60W per port on 3 high power ports.

•IEEE 802.1x Port-Based Authentication/MAB

•Network Access Control (NAC)

•Virtual switch based on 802.1Q VLAN

•1024 MAC addresses

•25 VLANs per Ethernet port

•VLAN tagging/detagging, marking/remarking per Ethernet port

•VLAN translation, trunking and stacking

•QoS and security policies based on VLAN-ID, 802.1p, DSCP

•MAC address limiting to prevent flooding attacks and limiting the number of

devices attached to a port

•IPv6 capable for enterprise services

•L2-L4 Access Control Lists (ACLs)

•Upstream ACL rate limiting

•Supports Dante and CobraNet digital audio systems over IP

•IGMP v2/v3 snooping

•Link Layer Data Protocol (LLDP) for autoprovisioning, inventory and PoE power

management.

FlexSym-ONT205-Installation-Guide

Page 9 of 38

Security Features

Tellabs has implemented unique advanced security features to protect enterprise

networks. The ONT180C supports security across the optical distribution network and

end-to-end over the OLAN system; such as encryption of traffic on the PON using the

Advanced Encryption Standard AES-128 and Access Control Lists (ACL) at Layer 2

through 4 levels.

The ONT provides for advanced dynamic assignment of services to a port via the use of

Network Access Control (NAC) with fall back to a Guest VLAN. The ONT supports IEEE

802.1x port-based authentication and MAB. This prevents unauthorized access to ports,

and offers RADIUS authentication for users and distribution of policy to end users based

on their login.

Connectors and Indicators

Connectors

The back edge of the FlexSym ONT205 has 8 connectors:

•DC 54V –DC power input. This is a special power connector that mates with a

Phoenix-type pluggable terminal connector (5.08 mm pitch 2P), allowing remote

bulk DC power to be used. (Remote DC power is limited to 100 VA by code.)

FlexSym-ONT205-Installation-Guide

Page 10 of 38

•UPS –Uninterruptible Power Supply (UPS) AC adapter input. This is a special

connector that matches the DC power output cable from the adapter and the

optional Battery Backup Unit (BBU) accessory (not currently available).

•GE1 –GE4 Four (4) 10/100/1000 Gigabit Ethernet ports supporting Power over

Ethernet (PoE) devices. These are standard RJ45 Ethernet connectors.

•MG5 - One (1) IEEE 802.3bz and 802.3an port that supports

10M/100M/1G/2.5G/5G/10G data rates with auto-negotiation

•Optical Connector(green). - This is the optical port for connecting the ONT to

the upstream Optical Line Terminal (OLT) over a fiber-optic cable. It is a standard

replaceable SC/APC-type connector for Single-Mode Fiber (SMF) cable. The

connector is protected by a small, black plastic insert in shipping.

Indicators

The top of the ONT has the following LED indicators near the front edge:

•Power –shows status of the DC power input

•PON –shows status of the Passive Optical Network (PON)

•GE1 –MG5 –shows status of the five service ports

Indice

Altri manuali Tellabs Hardware di rete

Tellabs

Tellabs 100 Series Manuale utente

Tellabs

Tellabs 263DC Manuale utente

Tellabs

Tellabs FlexSym OLT-mini Manuale utente

Tellabs

Tellabs 8820 MSR Guida utente

Tellabs

Tellabs 251 Manuale utente

Tellabs

Tellabs FlexSym OLT6 Manuale utente

Tellabs

Tellabs 7100 Istruzioni operative e di manutenzione

Tellabs

Tellabs ONT180C Manuale utente

Tellabs

Tellabs 6047 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente