Tellus S103 Manuale utente

S103 WLAN Compact Serial Module

S103

WLAN Compact Serial Module

OEM lnstallation Guide

Version 1.0

S103 WLAN Compact Serial Module Version 1.0

WARNING -Disclaimer

Tellus Group Corp., its Sales, Manufacturing and Design Organizations, Reps., Distributors,

VARs and distribution channels are absolutely not liable for any death, injury, property

damage, loss of data, loss of business of any other unmentioned loss. The aforementioned

entities are not liable even in the event that any of these entities were apprized of the specifics

or generalities of an application or intended installation at any time.

Radio Linkages of any type can be fragile and tenuous. Over 1/5th of the entire population of

the world now owns cellular telephones, and as any user of a cell phone knows, the cell

phone radio communications link may be easily disrupted or completely lost simply by turning

your head or by other small environmental movements or changes. This clearly demonstrates

to everyone the fragility of any radio link and why radio should not be used for critical

implementations, or where death, personal injury, physical damage, property damage or

environmental damage may result.

Tellus Group Corp.’s products are not designed, manufactured, or intended for use or resale

as online control equipment in hazardous environments requiring fail-safe performance, such

as, but not limited to the operation of nuclear facilities, aircraft navigation, vital communication

systems, air traffic control, life support machines, weapons systems, or any industry in which

environmental disruptions or technology failure could lead directly to death, personal injury,

physical damage, property damage or environmental damage.

Do not use this device in applications for

which any failure of the wireless link or any

data error may cause death, injury or damage

of any kind.

S103 WLAN Compact Serial Module Version 1.0

No part of this documentation may be reproduced in any form or by any means or used to

make any derivative work (such as translation, transformation, or adaptation) without written

permission from the copyright owner. All the other trademarks and registered trademarks are

the property of their respective owners.

Statement of Conditions

The content described in this manual may be improved or changed at any time and it is

subject to be changed without notice.

Manufacturer assumes no responsibility for errors contained herein or for direct, indirect,

special, incidental or consequential damages with the furnishing, performance, or use of this

manual or equipment supplied with it, even if manufacturer of its suppliers have been advised

of the possibility of such damages.

Electronic Emission Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device will accept any interference received, including interference that may cause

undesired operation.

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user need to correct the interference at

his area. If the equipment causes interference to radio or television reception, try to correct

the interference by using one or more of the following measures:

lPlug the equipment into an outlet that is on a different circuit from the television or radio.

lChange the direction of the television or radio antenna until the interference disappears.

lMove the equipment to one side or the other of the television or radio.

lMove the equipment farther away from the television or radio.

To assure continued compliance, any changes or modifications not expressly approved by

manufacturer could void the user’s authority to operate the equipment.

S103 WLAN Compact Serial Module Version 1.0

FCC Radiation Exposure Statement

This device and its antenna must operate with a separation distance of at least 20 cm from all

persons and must not be co-located or operating in conjunction with any other antenna or

transmitter. End users must be provided with specific operating instructions for satisfying RF

exposure compliance.

Regulatory information / Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the

instructions included in the user documentation provided with the product. Any changes or

modifications (including the antenna) made to this device that are not expressly approved by

manufacturer may void the user’s authority to operate the equipment. The manufacturer is not

responsible for any radio or television interference caused by unauthorized modification of

this device, or the substitution or attachment of connecting cables and equipment other than

manufacturer specified. It is the responsibility of the user to correct any interference caused

by such unauthorized modification, substitution or attachment. Manufacturer and its

authorized resellers or distributors will assume no liability for any damage or violation of

government regulations arising from failing to comply with these guidelines.

Modular Approval

This device is intended only form OEM integrators under the following conditions:

1) The antenna must be installed such that 20cm is maintained between the antenna and users,

and

2) The transmitter module may not be co-located with any other transmitter or antenna.

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain

laptop configurations or co-location with another transmitter), then the FCC authorization is

no longer considered valid and the FCC ID can not be used on the final product. In these

circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization.

S103 WLAN Compact Serial Module Version 1.0

End Product Labeling

This transmitter module is authorized only for use in devices where the antenna may be

installed such that 20 cm may be maintained between the antenna and users The final

end product must be labeled in visible area with the following:

"Contains TX FCC ID: PB6-04051¨

End Product Manual Information

The user manual for end users must include the following information in a prominent location

“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the

antenna used for this transmitter must be installed to provide a separation distance of at

least 20cm from all persons and must not be co-located or operating in conjunction with

any other antenna or transmitter.”

S103 WLAN Compact Serial Module Version 1.0

Limited Warranty

This product is warranted by manufacturer to be free from defects in material and

workmanship for one (1) year from the date of purchase unless otherwise stated.

During this period if this product is found to be defective in material or workmanship,

manufacturer or one of its authorized service facilities will at its option either repair or replace

this product without charge, subject to the following conditions, limitations and exclusions:

•This warranty extends to the original consumer purchaser only and is not assignable or

transferable.

•This warranty shall not apply to any product which has been subjected to misuse, abuse,

abnormal use, negligence, alteration or accident, or has had its serial number altered or

removed.

•This warranty does not apply to any defects or damage directly or indirectly caused by or

resulting from the use of unauthorized replacement parts and/or service performed by

unauthorized personnel.

•This warranty does not apply to the software driver that accompanies this product.

This warranty is made expressly in lieu of all other warranties, expressed or implied, including

but not limited to any implied warranty of merchantability of fitness for a particular purpose,

and all other obligations on the part of Manufacturer provided, however, that if the disclaimer

of implied warranties is ineffective under applicable law, the duration of any implied warranties

arising by operation of law shall be limited to one (1) year from the date of purchase or such

longer period as may be required by applicable law.

Manufacturer hereby disclaims any and all liabilities for consequential and incidental damages

arising out of or in connection with any breach of this warranty or any other claim with respect

to this product, including but not limited to claims of negligence, strict liability in tort or breach

of contract.

**Statement:

The radio portion of this module has not been shielded. The module will be installed in the 

OEM device only. OEM integrator should apply FCC certification after the module installed 

to OEM device for meet FCC rules.

S103 WLAN Compact Serial Module Version 1.0

Table of Contents

1. Introduction......................................................................................................................... 8

1.1 Features:.......................................................................................................................8

1.2 Application....................................................................................................................8

2. Installation..........................................................................................................................11

2.1 Package Contents.......................................................................................................11

2.2 Module Dimension.......................................................................................................11

2.3 Pin-Out Definition .......................................................................................................12

2.4 Default Settings ..........................................................................................................13

3. Configuration –Web Browser......................................................................................... 14

3.1 Home Page.................................................................................................................16

3.2 Administration.............................................................................................................17

3.3 Network.......................................................................................................................18

3.4 RS232.........................................................................................................................19

3.5 WLAN Basic................................................................................................................20

3.6 WLANAdvanced ........................................................................................................22

3.7 System Description for Auto Search..........................................................................23

3.8 UDP Send Time..........................................................................................................24

3.9 Logout.........................................................................................................................25

3.10 Save & Reboot ...........................................................................................................25

4. Configuration –Command Mode.................................................................................... 26

5. Troubleshooting................................................................................................................ 28

Appendix A Configure Your Computer IP manually.................................................................29

Appendix B Technical Information ...........................................................................................31

Figure 1-1 RS232 to WLAN conversion ....................................................................................8

Figure 1-2 Tradition RS232 Connection ....................................................................................9

Figure 1-3 WLAN Pear to Pear connection...............................................................................9

Figure 1-4 Two WLAN connections via AP................................................................................9

Figure 1-5 One WLAN connection via AP ...............................................................................10

Figure 1-6 One WLAN connection via AP and Virtual COM...................................................10

Figure 2-1 Module Dimension...................................................................................................11

Figure 2-2 Pin Out Definition....................................................................................................12

Figure 3-1 Auto Search Utility..................................................................................................15

Figure 3-2 Home Page.............................................................................................................16

Figure 3-3 Administration.........................................................................................................17

S103 WLAN Compact Serial Module Version 1.0

Figure 3-4 Network –IP address.............................................................................................18

Figure 3-5 RS232.....................................................................................................................19

Figure 3-6 WLAN Basic............................................................................................................20

Figure 3-7 WLAN Advanced ....................................................................................................22

Figure 3-8 System Description for Auto Search......................................................................23

Figure 3-9 UDP Send Time......................................................................................................24

Figure 3-10 Logout...................................................................................................................25

Table 1 WLAN Default Settings................................................................................................13

Table 2 RS232 Default Settings...............................................................................................13

Table 3 Command List.............................................................................................................27

S103 WLAN Compact Serial Module Version 1.0

1. Introduction

Thank youfor purchasing this 802.11b WLAN serial module (hereafter we call this product as

The Module).

The Module is designed for embedded into device that uses battery power and has

very limited space. The Module will replace the device’s RS232 cable that connects

to host PC. Via IP network compatible wireless connection,The Module transfers byte stream

between device and host PC. The Module is compliant with 802.11b protocol

standard. It can operate at ad-hoc mode or infrastructure mode, and support 64/128-bitsWEP

security. The design goal for The Module is to provide an OEM embedded device with

compact and small size, easy to use and low power consumption.

1.1 Features:

ŸProgrammable baud rate (9600, 38400, 57600, 115200 bps)

ŸFull-duplex (serial data in, and serial data out)

ŸHardware flow control

ŸFirmware upgrade through RS232 port

ŸSupports full mobility and seamless roaming from cell to cell

ŸEasy set up via Console or Desktop Utility

ŸLED status and activity indicators for easy installation, monitoring and diagnostics

ŸLink to WLAN Access Point (referred as infrastructure mode)

ŸLink to another WLAN station (referred as “ad hoc” mode)

1.2 Application

The Module provides the RS232 to WLAN converting function (Figure 1-1. For the device

(especially the device) that needs to replace the RS232 cable with WLAN, The

Module is the right choice.

Figure 1-1RS232 to WLAN conversion

S103 WLAN Compact Serial Module Version 1.0

The following figure (Figure 1-2) shows the traditional RS232 connection.

Figure 1-2Tradition RS232 Connection

Few typical RS232 replacement (with WLAN) examples are shown in Figure 1-3to Figure 1-6.

Figure 1-3WLAN Pear to Pear connection

DeviceADevice B

RS232

WLAN

Serial

Module

RS232

WLAN

Serial

Module

Network

with AP

Figure 1-4Two WLAN connections via AP

Indice

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente

tellus S103 Manuale utente

Manuali Unità di controllo popolari di altre marche