Tenda 5G03 Manuale utente

For product or function details, please go to www.tendacn.com to

download the user guide.

AX1800 Wi-Fi 6 5G NR Router

Quick Installation Guide

5G03

Package contents

5G NR Router × 1

Ethernet cable × 1 User manual × 1

Power adapter × 1

- 1 -

I. Set up the router

Tips

− To ensure performance and avoid damage to the SIM card, do

not insert or remove the SIM card when the router is running.

− To remove the SIM card, gently press the SIM card until it clicks.

The SIM card will automatically pop out.

❶Open the SIM card cover on the bottom panel of the router.

❷Insert a SIM card into the slot. Then close the cover.

- 2 -

SIM

SIM

RST

Mini SIM card (2FF) Nano SIM card (4FF)Micro SIM card (3FF)

Tips

If the LED indicator does not light up, refer to Q1 in FAQ.

❸Use the included power adapter to connect the power jack of

the router to a power source.

❹Press the button on the router to turn it on.

All LED indicators light up and then off immediately. Wait a

moment and then the , and indicators light up in

sequence when the router is connected to the internet

properly.

- 3 -

MESH

1

2

LAN1 WAN/LAN2 PWR

II. Access the internet

Tips

− Set your login password promptly to prevent unauthorized access.

− If you cannot log in to the web UI of the router, refer to Q3 in FAQ.

Connect your wired device, such as a computer, to the LAN1

or WAN/LAN2 port of the router using an Ethernet cable.

Connect your wireless device, such as a smartphone, to the

Wi-Fi network of the router using the Wi-Fi Name and Wi-Fi

Key labeled on the bottom panel of the router.

To further configure the router, log in to the web UI of the router

by visiting tendawifi.com on a connected device.

- 4 -

MESH

1

2

LAN1 WAN/LAN2 PWR

Or

III. (Optional) Extend your

network

Tips

− Currently, 5G03 can be used as the primary node to network with

devices that support the EASYMESH R2 protocol.

− Please ensure that the new device you want to add has never been

used. If not, reset it first.

Power on the router and connect it to the internet properly.

Place the new device in an elevated and open position within

3 meters from your router and power it on.

Press the MESH button of the router for about 1 to 3 seconds.

The LED indicator blinks fast. Within 2 minutes, press the

MESH/WPS button of the new device for 1 to 3 seconds to

negotiate with this router.

When the LED indicator of the router blinks slowly for 10

seconds and then lights solid on, the networking is successful

and the new device becomes a secondary node in the

network.

Refer to the following relocation tips to locate the new device

to a proper position:

• Ensure that the distance between any two nodes is within

their coverage range.

• Keep your nodes away from electronics with strong

interference, such as microwave ovens, induction cookers,

and refrigerators.

• Place the nodes in a high position with few obstacles.

- 5 -

1.

2.

3.

4.

5. Power on the new device again and check that its internet

connection status is correct according to its user guide.

- 6 -

Original node Add-on node

I. Configurar o roteador

Dicas

− Para garantir o desempenho e evitar danos ao cartão SIM, não

insira ou remova o cartão SIM quando o roteador estiver em

funcionamento.

− Para remover o cartão SIM, pressione suavemente o cartão

SIM até ouvir um clique. O cartão SIM sairá automaticamente.

❶Abra a tampa do cartão SIM no painel inferior do roteador.

❷Insira um cartão SIM no slot. Depois feche a tampa.

- 7 -

SIM

SIM

RST

Cartão Mini SIM (2FF) Cartão Nano SIM (4FF)Cartão Micro SIM (3FF)

Português

(Brasil)

Dicas

Se o indicador LED não acender, consulte o Q1 no FAQ.

❸Use o adaptador de alimentação incluído para conectar a

tomada de alimentação do roteador a uma fonte de

alimentação.

❹Pressione o botão no roteador para ligá-lo.

Todos os indicadores LED se acendem e depois se apagam

imediatamente. Espere um momento e então o , e os

indicadores acenderão em sequência quando o roteador

estiver conectado corretamente à Internet.

- 8 -

MESH

1

2

LAN1 WAN/LAN2 PWR

II. Acessar a internet

Dicas

− Defina sua senha de login imediatamente para evitar acesso não

autorizado.

− Se você não conseguir entrar na interface web do roteador,

consulte o Q3 em FAQ.

Conecte seu dispositivo com fio, como um computador, à porta

LAN1 ou WAN/LAN2 do roteador usando um cabo Ethernet.

Conecte seu dispositivo sem fio, tal como um smartphone, à

rede Wi-Fi do roteador usando o Wi-Fi Name e a Wi-Fi Key

etiquetada no painel inferior do roteador.

Para configurar ainda mais o roteador, faça o login na interface

web do roteador visitando o site tendawifi.com em um

dispositivo conectado.

- 9 -

MESH

1

2

LAN1 WAN/LAN2 PWR

ou

Indice

Lingue:

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente