Tentsile T-Mini Manuale utente
It is important that all users read and understand the materials in
this manual before any installation and use of the product.
NO MORE THAN 1 MONTH CONTINUOUS USE AT ANY ONE TIME
DO NOT LEAVE OUTSIDE UNATTENDED.
T-Mini
OWNERS MANUAL
CONGRATULATIONS
YOU ARE NOW THE PROUD OWNER OF A
03: Introduction03: Introduction
04: Terms of Use04: Terms of Use
05: Specifications05: Specifications
06: Warnings & Disclaimers06: Warnings & Disclaimers
07-08: Layout & Alignment07-08: Layout & Alignment
09-22: Set up instructions09-22: Set up instructions
23: Floor calibration23: Floor calibration
24: Ratchet usage24: Ratchet usage
25: Policies25: Policies
26: The small print26: The small print
IT IS IMPORTANT THAT ALL USERS READ AND UNDERSTAND THE MATERIALS
IN THIS MANUAL BEFORE ANY INSTALLATION AND USE OF THE PRODUCT.
Tentsile T-Mini
01 02
W A R N I N GW A R N I N G
TENTSILE IS NOT A TOYTENTSILE IS NOT A TOY
RISK OF SERIOUS INJURYRISK OF SERIOUS INJURY
A VISUAL AND TACTILE INSPECTION OF YOUR TENTSILE’S FLOOR,
STRAPS AND RATCHETS SHOULD BE MADE BEFORE EACH USE.
FOR SAFETY REASONS, STRAPS AND RATCHETS SHOULD BE
REPLACED EVERY 2 YEARS.
NO MORE THAN 3 MONTHS CONTINUOUS USE AT ANY ONE TIME
DO NOT LEAVE OUTSIDE UNATTENDED FOR MORE THAN A WEEK.
THE HAMMOCK IS RATED FOR 1,500 HOURS OF UV EXPOSURE.
CHECK THE HEALTH AND STRENGTH OF THE TREES
CHOSEN TO BE ANCHOR POINTS BEFORE USE.
Recommended set up height 1.2m / 4 feet
MAX LOAD 200kg / 440lbs.
DO NOT EXCEED MAXIMUM WEIGHT LOAD CAPACITY.
Introduction Terms of Use
03 04
The T-Mini provides a unique opportunity for you and your friends to experience the great
outdoors with a whole new level of freedom and comfort.
Tentsile invented Tree Tents as treehouses you can take anywhere; combining the versatility
of a hammock with the comfort and security of a tent.
The T-Mini comprises of a double hammock, suspended in tension above the ground for 2
people.
The unique design creates a comfortable base camp, irrespective of ground conditions, as
well as providing increased protection from, snakes and other predators – if you venture
somewhere more exotic.
This product was created because Tentsile loves trees and believes that if we’re all hanging
out in trees, they can’t cut them down!
20 trees are planted for every Tentsile Tree Tent sold.
PLAY, CAMP, EXPLORE...
Tentsile Tree Tent should be set up only as outlined in this
manual.
NEVER jump into, onto or use it as a trampoline or
swing. It is not intended to be used for rock climbing,
cliff faces, overhangs or above or next to large drops.
DO NOT attempt to use this product for anything
another than its intended purpose, and always observe
height and weight limits.
DO NOT use walls, fences, street furniture, roof
racks, movable platforms, posts or trees less than
25cm/10inches in diameter as anchor points, as they
may not be strong enough.
DO NOT use tensioning components other than those
supplied with this product.
DO NOT set up higher than 1.2metres / 4 feet from the
ground or above hard, sharp or pointy objects.
Tactile and visual checks should be made to
ALL tent components and ALL anchor points before each
use.
Replace any damaged elements if any are found.
Keep away from fire and sharp objects.
DO NOT use after the consumption of any intoxicating
substances.
Children must be supervised by an adult at all times.
DO NOT attach to trees or branches that show signs of
structural weakness.
DO NOT adjust/open ratchets whilst tent
is occupied.
DO NOT use during lightning storms or high winds.
DO NOT use in areas of unstable ground.
Tentsile Tree Tents do not offer protection from all
animals.
Specifications Warnings & Disclaimers
Size:
3.25 x 3.25 x 2.7m / 10 x 10 x 8ft
Floor area:
3.75sqm / 40sqf
Bag Size:
30 x 14 x 14cm / 12 x 6 x 6”
Ratchet & straps:
3 x 25mm straps - 1.5 tonne
minimum breaking strength.
1 x 25mm Ratchet.
Floor:
45D polyester-nylon composite, or
black mesh.
Tent weight:
2.5kg / 5.5lbs
Maximum capacity:
2 adults.
Maximum height:
1.2m / 4ft
DO NOT EXCEED MAXIMUM LOAD 220kg / 485lbs
05 06
Installation and use of the Tentsile Tree Tent may involve
heights, can be dangerous and may lead to injury and/
or death.
The installation must never be executed by minors, and
extreme care and caution must be taken when executed
by adults.
Do not use any other components, parts, tools or
materials other than those included in the Tentsile Tree
Tent package, recommended in this manual or in other
Tentsile literature.
A hanging and/or suspension system is only as strong
as its weakest link and all instructions and guidelines
must be followed.
The Tentsile Tree Tent must only be used in the manner
described in this manual. When assembled and
installed, the Tentsile Tree Tent places significant force
on the anchor points; great care must be exercised when
using it to decrease the risk of injury and/or death.
Overloading the Tentsile Tree Tent with more than
485lbs (220kg) increases the forces and may cause
anchor, Tree Tent and/or any parts to fail, resulting
in injury and/or death.
The manufacturer and resellers of the Tentsile Tree
Tent explicitly disclaim any and all responsibility
and liability for any death, paralysis, injury, and/
or damage to any person or property that may occur
that arises out of or is in any way related to the use
of this product.
Using any equipment that is suspended above
ground can be a dangerous activity that may result
in serious injury and/or death even when used
properly. Use at your own risk and always use
common sense.
Positioning the T-MiniPositioning the T-Mini
Tentsile Tree Tents need 3 secure and strong anchor points to suspend from. TheTentsile Tree Tents need 3 secure and strong anchor points to suspend from. The
distances are marked below. Once the location is found, lay out the T-Mini ondistances are marked below. Once the location is found, lay out the T-Mini on
the ground with the corners facing your selected trees. Protective tree wraps arethe ground with the corners facing your selected trees. Protective tree wraps are
provided should you wish to use them.provided should you wish to use them.
T-Mini FloorT-Mini Floor
x1 Ratchetx1 Ratchet
x3 Strapsx3 Straps
T-MiniT-Mini
Minimum setup distances:Minimum setup distances:
4 x 4 x 3m / 10 x 10 x 13ft4 x 4 x 3m / 10 x 10 x 13ft
Maximum setup distances:
9 x 9 x 10m / 29 x 29 x 32ft
Anchor point shouldAnchor point should
be less than 90 degrees frombe less than 90 degrees from
each other.each other.
TreeTree
TreeTree
Tree
TreeTree TreeTree
TreeTree
07 08
Sight-Line-TagSight-Line-Tag
Use the Sight-Line-Tag on the side of the T-Mini. LookUse the Sight-Line-Tag on the side of the T-Mini. Look
along the tag and ensure it and the strap are inline withalong the tag and ensure it and the strap are inline with
the tree. There is a tolerance of up to 5-7 degrees, butthe tree. There is a tolerance of up to 5-7 degrees, but
if Sight-Line-Tags are ignored – you are likely to breakif Sight-Line-Tags are ignored – you are likely to break
your unit.your unit.
SIGHTLINETAGS
09 10
1, Wrap the loop end of each
strap around your selected trees.
2, Once around, thread the
strap and pull it all through
towards the T-Mini.
3, Ensure the strap is
flat against the tree
and not twisted.
Tree Straps
With a location found,
start by wrapping the
tree straps around your
selected trees.
Rear/TailRear/Tail
FrontFront
11 12
Lay Out The T-MiniLay Out The T-Mini
Take the T-Mini and lay it out on the ground inTake the T-Mini and lay it out on the ground in
the desired location between yout selected trees.the desired location between yout selected trees.
Ensure it is the correct way up with the elasticEnsure it is the correct way up with the elastic
crossed straps facing up.crossed straps facing up.
4, Lay the T-Mini on the4, Lay the T-Mini on the
ground inbetweenground inbetween
your selected treesyour selected trees
with the straps.with the straps.
T-MiniT-Mini
12
5, Wrap the loose end5, Wrap the loose end
underneath the straight edge.underneath the straight edge.
4, Pull the strap attached to4, Pull the strap attached to
tree through the D-ring.tree through the D-ring.
6, Continue over the top and6, Continue over the top and
back underneath againback underneath again
and hold underneath.and hold underneath.
Tying The Half Windsor KnotTying The Half Windsor Knot
Once all 3 straps are around the selected trees,Once all 3 straps are around the selected trees,
they can then be connected to the D-rings. 2 ofthey can then be connected to the D-rings. 2 of
the corners require Half Windsor knots, one at thethe corners require Half Windsor knots, one at the
rear/tail and the other at either front corner.rear/tail and the other at either front corner.
Rear/Tail:Rear/Tail:
Attach Half WindsorAttach Half Windsor
KnotKnot
Front:Front:
Tie Half Windsor to either sideTie Half Windsor to either side
13
T-MiniT-Mini
7, Poke the strap through the7, Poke the strap through the
D-ring to form a loop thatD-ring to form a loop that
will hold the tension.will hold the tension.
8, Feed this loop underneath8, Feed this loop underneath
the top strap piece to formthe top strap piece to form
a tight knot.a tight knot. 9, This knot can be released9, This knot can be released
by pulling the loose end.by pulling the loose end.
14
11, Feed the loop end through11, Feed the loop end through
the D-ring to half way.the D-ring to half way.
12, Now feed the ratchet12, Now feed the ratchet
through the loop ofthrough the loop of
the strap.the strap.
13, Pull it tight securing13, Pull it tight securing
it to the D-ring.it to the D-ring.
14, Pull it towards the strap14, Pull it towards the strap
attached to the tree thatattached to the tree that
will attach to the ratchet.will attach to the ratchet.
10, Begin by ensuring the10, Begin by ensuring the
strap is not twisted.strap is not twisted.
Attaching The RatchetAttaching The Ratchet
The selected front corner for the ratchet strap canThe selected front corner for the ratchet strap can
now be attached. This strap will control the amountnow be attached. This strap will control the amount
of tension.of tension.
You will need to loosen and readjust the lengths ofYou will need to loosen and readjust the lengths of
each strap until the tent is aligned for equal tension.each strap until the tent is aligned for equal tension.
Front:Front:
Attach ratchet to chosen cornerAttach ratchet to chosen corner
Rear/Tail:Rear/Tail:
Do NOT attach the ratchet toDo NOT attach the ratchet to
the tail endthe tail end
15 16
T-MiniT-Mini
19, Give a strong pull before19, Give a strong pull before
cranking the ratchet.cranking the ratchet.
18, Take up the slack and pull18, Take up the slack and pull
towards the tree strap nowtowards the tree strap now
to create tension.to create tension.
16, Feed the tree strap end16, Feed the tree strap end
through the slot in ratchet.through the slot in ratchet.
15, Ensuring there’s enough15, Ensuring there’s enough
length, bring the ratchetlength, bring the ratchet
strap and tree strap together.strap and tree strap together.
17, Feed it in and pull it17, Feed it in and pull it
through making sure itthrough making sure it
does not twist.does not twist.
Fitting Strap To The Ratchet
With the ratchet strap attached to the D-ring, itWith the ratchet strap attached to the D-ring, it
can now be connected to the tree strap length.can now be connected to the tree strap length.
Once attached, check the overall position of theOnce attached, check the overall position of the
T-Mini and that it is correctly aligned.T-Mini and that it is correctly aligned.
Rear/TailRear/Tail
T-MiniT-Mini
Front:Front:
Attach ratchet to chosen cornerAttach ratchet to chosen corner
17 18
Altri manuali per T-Mini
2
Indice
Altri manuali Tentsile Amaca
