Texas Instruments TMDX654IDKEVM Manuale utente

AM65x/DRA80xM

Industrial Development Kit

Manufactured by Mistral Solutions Pvt. LTD. • www.mistralsolutions.com

Welcome to the AM65x/DRA80xM Industrial Development Kit (IDK) Quick Start Guide. This guide is

designed to help you through the initial setup of the board. This IDK allows you to experience industrial

applications which showcase the AM65x/DRA80xM Quad-Core Cortex®–A53, Dual-Core Cortex-R5F,

gigabit PRU-ICSS (real-time industrial communications subsystem), and more. The IDK contains

the following:

Hardware

• AM6548/DRA804M Quad Core Cortex®-A53

function equivalent processor

• IDK Application card

• 2-lane PCIe SerDes card

• 4GB DDR4 with ECC

• On board 16 GB eMMC

• On board 512Mb OSPI Flash

Printed Documents

• AM65x/DRA80xM IDK Quick Start Guide

(this document)

Miscellaneous

• 1 SD card

• 1 USB 2.0 cable

• 1 Ethernet cable

Not included in box

The following hardware is not included in the box and must be procured separately:

1. Power supply. Use one of the following power supply options for powering up the IDK. Pick a

power supply with all the applicable regional product regulatory/safety certication requirements such

as UL, CSA, VDE, CCC, PSE, etc.

The DIN connector power supply is recommended to provide enough power for applications that make

use of the PCIe interface.

2. 1280 x 800 LCD Display Accessory Kit. The LCD is optional and can be purchased separately

using TI part number TMDSLCD1EVM.

Connector Speciﬁcations Examples

Power DIN, 4 Pin +24VDC, 5A Output (Max) CUI Inc. SDI120-24-U-P51

Barrel Plug, 2.5mm I.D. x

5.5mm O.D. x 9.5mm

+24VDC, positive center, 2.71A

Output (Max)

CUI Inc. SDI65-24-UD-P6

Optional: If you have purchased the LCD Accessory

Kit, assemble the LCD onto the IDK following the

instructions included with the LCD Accessory Kit.

Connect a power supply (not included) to the DIN

connector or power jack on the IDK and plug it in to

an AC power source. Do not connect both, only one

power supply must be connected.

Insert the SD card into the IDK. Alternatively, download

and install the latest Processor SDK-RTOS from

http://www.ti.com/tool/processor-sdk-am65x, create

a bootable SD card and insert it into the IDK.

Connect the supplied USB debug cable to the USB

connector labeled “UART” on the board. Connect the

other end to your PC. Then open a serial console on

your PC such as Teraterm. Please note that you may

need to download and install an FTDI driver from

http://www.ftdichip.com/FTDrivers.htm.

Default setup (TI-RTOS boot from SD card)

For more information on AM65x processors, including:

•User Guide •Software •How To •Design Files

Please visit www.ti.com/am65x

For support questions, please contact: [email protected] or www.ti.com/e2e

Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to

obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software

performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Trademarks in this issue: The platform bar and Sitara are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.

Printed in U.S.A.

SPRW324b

Note: This IDK is designed for optional use with a removable

CR2032 UL recognized lithium battery (not supplied). Always

use the CR2032VP Energizer 3V Lithium coin cell battery or

similar CR2032 UL recognized battery with Nominal Voltage

3.0 Volts, Capacity 235mAh

TI Processor SDK software development guides are available at:

Linux: www.ti.com/processor_sdk_linux

TI-RTOS: www.ti.com/processor_sdk_rtos

Android: www.ti.com/processor_sdk_android

7Note that this IDK comes with a coin battery holder.

A coin battery is not necessary for normal operation

of the IDK.

5 6

Optional: If you plan to use Code Composer Studio

(CCS) IDE to control the IDK, you must use another

USB cable connected to the USB connector labeled

“XDS110_USB” on the board. Refer to

http://software-dl.ti.com/processor-sdk-rtos/esd/docs/

latest/rtos/How_to_Guides.html#host for details about

CCS setup.

Turn on the IDK by sliding the toggle switch to the right.

To turn off, slide the toggle switch the left.

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you

permission to use these resources only for development of an application that uses the TI products described in the resource. Other

reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third

party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,

damages, costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on

ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable

warranties or warranty disclaimers for TI products.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Texas Instruments Microcontrollore

Texas Instruments

Texas Instruments MSP430F5638 Manuale utente

Texas Instruments

Texas Instruments LaunchPad MSP-EXP430F5529LP Manuale utente

Texas Instruments

Texas Instruments MSP430F5529 LaunchPad Manuale utente

Texas Instruments

Texas Instruments 430BOOST-SENSE1 Manuale utente

Texas Instruments

Texas Instruments SimpleLink CC3200 Wi-Fi Manuale utente

Texas Instruments

Texas Instruments TLC2543 Manuale utente

Texas Instruments

Texas Instruments Hercules TMS570LS31 Manuale utente

Texas Instruments

Texas Instruments OMAP35 Series Manuale utente

Texas Instruments

Texas Instruments Jacinto7 Manuale utente

Texas Instruments

Texas Instruments SimpleLink CC2620 Manuale del prodotto

Texas Instruments

Texas Instruments CC2531 Manuale utente

Texas Instruments

Texas Instruments MSP430F563x Manuale utente

Texas Instruments

Texas Instruments CC2652RSIP Manuale utente

Texas Instruments

Texas Instruments TMS370 Series Manuale utente

Texas Instruments

Texas Instruments CC2543EMs Manuale utente

Texas Instruments

Texas Instruments CC13 Series Manuale utente

Texas Instruments

Texas Instruments AFE722 Series Manuale utente

Texas Instruments

Texas Instruments MSP430F6735A Manuale utente

Texas Instruments

Texas Instruments MSP-WDS Metawatch Series Manuale utente

Texas Instruments

Texas Instruments MSP-FET430 Manuale utente

Texas Instruments

Texas Instruments MSPM0G310 Series Manuale utente

Texas Instruments

Texas Instruments SimpleLink Wi-Fi BoosterPack CC3135 Manuale utente

Texas Instruments

Texas Instruments MSP430F6723A Manuale utente

Texas Instruments

Texas Instruments MSP432 Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F800 Manuale utente

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuale utente

Mikroe

Mikroe click Proximity 2 Manuale utente