Texas Instruments CDC7005 Manuale utente

CDC7005 (BGA Package)

Evaluation Module Manual

High Performance Analog/CDC

2005 Clock Drivers

User’s Guide

SCAU005C

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application

solutions:

Products Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DSP dsp.ti.com Broadband www.ti.com/broadband

Interface interface.ti.com Digital Control www.ti.com/digitalcontrol

Logic logic.ti.com Military www.ti.com/military

Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork

Microcontrollers microcontroller.ti.com Security www.ti.com/security

Telephony www.ti.com/telephony

Video & Imaging www.ti.com/video

Wireless www.ti.com/wireless

Mailing Address: Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction

of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’s Guide prior to handling the product. This notice contains important safety information about temperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the supply voltage range of 3 V and 3.6 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than

45°C. The EVM is designed to operate properly with certain components above 60°C as long

as the input and output ranges are maintained. These components include but are not limited

to linear regulators, switching transistors, pass transistors, and current sense resistors. These

types of devices can be identified using the EVM schematic located in the EVM User’s Guide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Related Documentation From Texas Instruments

iii

Preface

Read This First

About This Manual

This manual explains how to use the CDC7005 evaluation module and to pro-

vide the guidelines to build the customer’s own systems. The manual includes

schematics, layout, bill of materials, and a software description.

How to Use This Manual

This document contains the following chapters:

-Chapter 1—Introduction

-Chapter 2—Quick Start

-Chapter 3—EVM Hardware

-Chapter 4—Serial Peripheral Interface (SPI) Software

-Chapter 5—Schematics, Board Layout, and Parts List

Related Documentation From Texas Instruments

-CDC7005 Data Sheet, SCAS685, Texas Instruments

FCC Warning

This equipment is intended for use in a laboratory test environment only. It

generates, uses, and can radiate radio frequency energy and has not been

tested for compliance with the limits of computing devices pursuant to subpart

J of part 15 of FCC rules, which are designed to provide reasonable protection

against radio frequency interference. Operation of this equipment in other

environments may cause interference with radio communications, in which

case the user at his own expense will be required to take whatever measures

may be required to correct this interference.

If You Need Assistance. . .

If you need assitance with this device, please email

[email protected]

Contents

1 Introduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 CDC7005 Functional Block Diagram 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Quick Start 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 EVM Hardware 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Board View and Connector Location 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Connector Description 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Hardware Configuration 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.1 Power Supply (P1, P2) 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.2 Onboard Switches and Indicators (S1−S2, D1−D4) 3-4. . . . . . . . . . . . . . . . . . . . . .

3.3.3 Programming Interfaces (J27, J28) 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.4 Loop Filter (J29−J35) 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.5 High-Speed Outputs and Inputs (J6−J15 and J19−J20) 3-5. . . . . . . . . . . . . . . . . . .

3.3.6 VCXO Inputs and Outputs (J23−J28) 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Serial Peripheral Interface (SPI) Software 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Functional Description 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Software Installation 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Application Level Circuit Diagram 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3.1 Passive Loop Filter 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3.2 Active Loop Filter—Internal Operational Amplifier 5-3. . . . . . . . . . . . . . . . . . . . . . . .

5.3.3 Active Loop Filter—External Operational Amplifier 5-4. . . . . . . . . . . . . . . . . . . . . . .

6 Parts List, Board Layouts, and Schematics 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Parts List 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Board Layout 6-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.3 Schematic 6-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

Figures

3−1 Board View 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4−1 Screen View 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5−2 CDC7005 With a Passive Loop Filter Configuration 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5−3 CDC7005 With an Active Loop Filter Using a CDC7005 Integrated OPA 5-3. . . . . . . . . . . . . .

5−4 CDC7005 With an Active Loop Filter Using OPA341 5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6−1 Component View and Silkscreen 6-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6−2 Top Layer View 6-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6−3 Bottom Layer View 6-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6−4 Ground Plane View 6-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6−5 Power Layer View 6-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

3−1 Connectors, Switches, and Indicators 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3−2 Filter Configurations 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

Introduction

The CDC7005 is a high-performance, low phase noise and low skew clock

synchronizer that synchronizes an on-board voltage controlled crystal

oscillator (VCXO) frequency to an external reference clock. The device

operates up to 800 MHz. The PLL loop bandwidth and damping factor can be

adjusted to meet different system requirements by selecting the external

VCXO, loop filter components, frequency for PFD, and charge pump current.

Each of the five differential LVPECL outputs can be programmed by a serial

peripheral interface (SPI). The SPI allows individual control of the frequency

and enable/disable state of each output. As the system requires external

components like a loop filter and VCXO, this EVM provides an excellent way

to evaluate and modify the performance and parameters of the clock system

in conjunction with the specific customer application. Loop bandwidth can be

selected as low as 10 Hz or less, allowing this device to clean the system’s

clock jitter. The CDC7005 can be used as a simple 1:5 LVPECL buffer with

output dividing options.

Topic Page

1.1 CDC7005 Functional Block Diagram 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

CDC7005 Functional Block Diagram

1-2

1.1 CDC7005 Functional Block Diagram

/16

PFD Charge

Pump

HOLD

OPA

SPI LOGIC

MUX_SEL

REF_IN

CTRL_LE

CTRL_DATA

CTRL_CLK

VCXO_IN

VCXO_INB

Y4B

Y3B

Y2B

Y1B

Y0B

CP_OUT

STATUS_LOCK

STATUS_VCXO

STATUS_REF

OPA_OUT

OPA_IN

OPA_IP

P Divider

Reference

I_REF

NRESET

NPD

PECL

Latch

PECL

Input

PECL

MUX0

PECL

Latch

PECL

Latch

PECL

Latch

PECL

Latch

PECL

MUX1

PECL

MUX2

PECL

MUX3

PECL

MUX4

PECL

Output

PECL

Output

PECL

Output

PECL

Output

PECL

Output

PECL-TO-

LVTTL

LVCMOS

Input

Prgm Delay

−

Prgm Divider

Prgm Delay

Prgm Divider

Indice

Altri manuali Texas Instruments Scheda madre

Texas Instruments

Texas Instruments SN74AXC4T774 Manuale utente

Texas Instruments

Texas Instruments LMP90100 Manuale utente

Texas Instruments

Texas Instruments TMAG5124EVM Manuale utente

Texas Instruments

Texas Instruments TPA3111D1EVM Manuale utente

Texas Instruments

Texas Instruments INA2290EVM Manuale utente

Texas Instruments

Texas Instruments DS90UH949A-Q1EVM Manuale utente

Texas Instruments

Texas Instruments BQ25887 Manuale utente

Texas Instruments

Texas Instruments ADS54J42EVM Manuale utente

Texas Instruments

Texas Instruments TUSB1142 Manuale utente

Texas Instruments

Texas Instruments TPS25944X635EVM Manuale utente

Texas Instruments

Texas Instruments TPS7A13EVM-057 Manuale utente

Texas Instruments

Texas Instruments TRF3703 Manuale utente

Texas Instruments

Texas Instruments PGA855 Manuale utente

Texas Instruments

Texas Instruments CDCE62005EVM Manuale utente

Texas Instruments

Texas Instruments ADS8638EVM-PDK Manuale utente

Texas Instruments

Texas Instruments REF35 Manuale utente

Texas Instruments

Texas Instruments ADS1278EVM-CVAL Manuale utente

Texas Instruments

Texas Instruments TPS25984 Manuale utente

Texas Instruments

Texas Instruments TPS548B28EVM-023 Manuale utente

Texas Instruments

Texas Instruments DCA1000EVM Manuale utente

Texas Instruments

Texas Instruments TMDSPREX28335 Manuale utente

Texas Instruments

Texas Instruments ISO721EVM Manuale utente

Texas Instruments

Texas Instruments TPA6130A2EVM Manuale utente

Texas Instruments

Texas Instruments LMK048 Series Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente