Texas Instruments DCA1000EVM Manuale utente

SPRUIK7–May 2018

DCA1000EVM Quick Start Guide

Quick Start Guide

SPRUIK7–May 2018

DCA1000EVM Quick Start Guide

This guide describes how to get started with raw ADC data capture from the xWR mmWave sensor EVMs.

WARNING

This is a Class A product. In a domestic environment, this product

may cause radio interference, and the user may be required to take

adequate measures.

Contents

1 Getting Started............................................................................................................... 2

List of Figures

1 Hardware Connection: DCA1000 With xWR mmWave Sensor EVMs ............................................... 2

2 Data and Supply Cable Connections ..................................................................................... 2

3 Configure Static IP Address on the PC................................................................................... 3

4 COM Ports.................................................................................................................... 3

5 Capture and Post ADC Data............................................................................................... 4

6 Visualization of the Captured Raw ADC Data ........................................................................... 5

Getting Started

www.ti.com

2SPRUIK7–May 2018

Submit Documentation Feedback

DCA1000EVM Quick Start Guide

1 Getting Started

1. Interface the DCA1000 board with the xWR mmWave sensor EVMs, as shown in Figure 1.

Figure 1. Hardware Connection: DCA1000 With xWR mmWave Sensor EVMs

2. Connect the microUSB and Ethernet cables to the PC interface, as shown in Figure 2. The DCA1000

and the xWR EVM are powered with 5-V, 2.5-A supplies.

Figure 2. Data and Supply Cable Connections

www.ti.com

Getting Started

SPRUIK7–May 2018

DCA1000EVM Quick Start Guide

3. Select the static IP address in the PC local area network properties, as shown in Figure 3.

Figure 3. Configure Static IP Address on the PC

4. Download and install the mmWave Studio tool from the following link: http://www.ti.com/tool/MMWAVE-

STUDIO. Install the Matlab Runtime Engine from here.

5. When the EVMs are powered and connected to the PC, install the FTDI drivers available from the

mmWave Studio installer package. For details on the FTDI driver installation, refer to the mmWave

Studio User Guide.

6. The device manager shows the COM ports, as shown in Figure 4. The RS232 COM port is shown as

XDS110 Class Application/User UART.

Figure 4. COM Ports

Getting Started

www.ti.com

4SPRUIK7–May 2018

Submit Documentation Feedback

DCA1000EVM Quick Start Guide

NOTE: If the XDS110 ports do not appear in the device manager, install the EMUPACK from

http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package.

7. Issue a board reset and connect the RS232 COM port.

8. Select the DataCapturedemo_xWR.lua file from the \mmwaveStudio\Scripts\ folder by clicking on the

browse button, then click on the run button.

Figure 5. Capture and Post ADC Data

www.ti.com

Getting Started

SPRUIK7–May 2018

DCA1000EVM Quick Start Guide

Data is captured by the captured card for a sample profile and frame, and the captured data is processed

and displayed as shown in Figure 6.

Figure 6. Visualization of the Captured Raw ADC Data

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you

permission to use these resources only for development of an application that uses the TI products described in the resource. Other

reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third

party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,

damages, costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on

ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable

warranties or warranty disclaimers for TI products.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Altri manuali per DCA1000EVM

Indice

Altri manuali Texas Instruments Scheda madre

Texas Instruments

Texas Instruments TVP7000EVM Manuale utente

Texas Instruments

Texas Instruments ADS127L11EVM-PDK Manuale utente

Texas Instruments

Texas Instruments LM2796 Manuale utente

Texas Instruments

Texas Instruments LMK5B33216EVM Manuale utente

Texas Instruments

Texas Instruments AFE539A4EVM Manuale utente

Texas Instruments

Texas Instruments ADS1261EVM Manuale utente

Texas Instruments

Texas Instruments INA232EVM Manuale utente

Texas Instruments

Texas Instruments bq76925EVM Manuale utente

Texas Instruments

Texas Instruments THVD4431EVM Manuale utente

Texas Instruments

Texas Instruments DLP LightCrafter Dual DLPC900 Manuale utente

Texas Instruments

Texas Instruments MMWAVE-DEVPACK Manuale utente

Texas Instruments

Texas Instruments DS16EV51-AEVKD Manuale utente

Texas Instruments

Texas Instruments TPIC8101 Manuale utente

Texas Instruments

Texas Instruments ALM2403-Q1 Manuale utente

Texas Instruments

Texas Instruments BP-DAC81404EVM Manuale utente

Texas Instruments

Texas Instruments TPL0401EVM Manuale utente

Texas Instruments

Texas Instruments TAS5121 Manuale utente

Texas Instruments

Texas Instruments TPS54291 Manuale utente

Texas Instruments

Texas Instruments LMR33640EVM Manuale utente

Texas Instruments

Texas Instruments TPA3136D2 Manuale utente

Texas Instruments

Texas Instruments TPS26630-33EVM Manuale utente

Texas Instruments

Texas Instruments LMX2572LPEVM Manuale utente

Texas Instruments

Texas Instruments TMP103EVM Manuale utente

Texas Instruments

Texas Instruments TPS658643 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente