The Singing Machine SML668G Manuale utente
TM
SML668G/SML668W
INSTRUCTION MANUAL/ MANUAL DE INSTRUCCIONES/
MODE D’EMPLOI
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
The Singing Machine® es marca registrada de The Singing Machine Co., Inc.
The Singing Machine® est une marque déposée de The Singing Machine Co., Inc.
— E1 —
Warnings
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and
it should remain readily accessible and operable during intended
use. In order to completely disconnect the apparatus from
power, the mains plug should be completely removed from the
AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the rear of the unit.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not
be impeded for intended use.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
— E2 —
Included
Please make sure the following items are included.
Manual
Main Unit
Wireless
Microphone
USB Charging Cable
— E3 —
Location of Controls (Front)
1. USB Port
2. (Bluetooth)/VOCALS OFF Button
3. REPEAT Button
4. (Skip) Button
5. Music Volume/Mic Volume control
6. FUNCTION Button
7. / (ON/STANDBY/LIGHTS) Button
8. Display
9. / (PLAY/PAUSE/STOP) Button
10. (Voice effects down) Button
11. (Voice effects up) button
12. (Skip) Button
13. RECORD Button
u
w
v
Uak
am
V at
X
W
x al
y
— E4 —
Location of Controls (Rear)
1. Handle
2. Extendable MIC holders
3. MIC 1 Jack
4. MIC 2 Jack
5. AUX IN Jack/*Reset hole
6. Type-C USB Jack
7.
+
(Mic Volume +) button
8
-
(Mic Volume -) button
9 Wireless mic power indicator
10 Wireles mic power button
WIRELESS
MICROPHONE
VW
Xat
u
v
w
x y
U
v
* If this device doesn't work, you can reset the device using the pin.
— E5 —
Rechargeable Battery
This unit has a built-in rechargeable battery pack for cordless operation. The battery should
not be serviced or replaced by the user. To maximize battery life, it is recommended to charge
the unit once a month. When the battery indicator on the display flashes slowly, follow these
steps to recharge:
1 Connect the included USB cable
to the USB Type-C port at the
rear of the unit. Plug the other
end into a computer USB port
or USB charging device (not
included).
2 Charge the unit for about 4
hours to achieve a full charge.
The battery indicator will turn off
when fully charged.
3 Once fully charged, disconnect
the USB cable. The unit can be
used for approximately 4 hours,
depending on the selected
function.
USB socket
NOTE: This unit is operated by an internal chargable lithium battery. The unit cannot
be turned on if the battery level is too low. It's suggested for the user to the unit for
about 5 mins to charge up the battery. (This will not fully charge the battery, see
above for charging time required).
ATTENTION: The sound volume will adjust automatically when the battery is not full.
Recycling and Disposal Information:
• Do not dispose of electronic devices or any of their components.
(especially batteries and LCD displays) in your municipal trash collection.
• Consult your local waste management authority or a recycling organization like Earth911.
com to find an electronics recycling facility in your area.
CAUTION: Rechargeable batteries must be recycled or disposed of properly.
— E6 —
Connections
Charging Instructions:
1 Connect the included USB cable to the
USB Type-C port on the back of the
device.
2 Plug the other end of the cable into a
DC5V 1A socket.
USB socket
Connecting to AUX IN Jack:
1 Use an appropriate cable (3.5mm
audio cable not included) to connect
an external device.
2 Refer to page E14 for instructions
on selecting and using the Aux In
function.
AUX IN
To External Unit
AUDIO OUTPUT
/ HEADPHONE JACK
Directions to change the light modes on your device:
There are 3 built-in light modes. Repeatedly
press / button to switch between lighting
effects.
u
— E7 —
Connections
Connecting Wireless Microphone(s):
Changing the Wireless Microphone’s Battery:
1 Press the / button to turn on the
unit.
2 Press the button on the Wireless
Mic to turn on the microphone. The
Mic indicator will blink and will remain
solid when connected.
NOTES:
• The wireless mics have a working distance
of up to 30 feet/10 meters in open space.
• If there is no audio input to the unit for 20
minutes, the wireless mic connection will
automatically turn off. To reactivate the
connection, turn on the unit and press the
button.
When the wireless mic batteries are low
the battery indicator will flash. Change the
batteries as follows:
1 Unscrew the bottom of the wireless
microphone.
2 Replace the batteries with 2 x "AA"
size/LR6 battery.
3 Screw the bottom of the wireless
microphone back on.
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer’s
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
u
— E8 —
Connections
Connect the wired microphone (not included)
into Mic jack uor v (when desired); the
corresponding mic Indicator light will blink.
Connecting optional wired Microphones:
v
u
Energy Saving (Auto Power System-APS)
If there is no audio playback, the unit will automatically enter standby mode after 20
minutes. To resume using the unit, press the / button.
APS is designed to save energy.
— E9 —
Operation
1 Connect the unit and turn it on by
pressing the / button.
2 Insert a USB flash drive with MP3
files into the unit's USB port. Our
Karaoke Store offers a wide range of
downloadable karaoke music.
3 Press the FUNC button repeatedly to
select the USB mode. The display will
show "USb".
Press the / button to start
playback.
Press the / button during playback
to pause the song.
Press and hold the / button to
stop playback.
NOTE: The USB mode requires the flash drive
to be inserted.
4 Adjust the volume to a comfortable
level using the MUSIC VOLUME/MIC
VOLUME control.
Instructions for playing songs from a USB:
v
u
w
x
Altri manuali per SML668G
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali The Singing Machine Altoparlanti
