The Source 8080288 Manuale utente
INCLUDED
• Rechargeable speaker
• Micro USB charging cable
• 3.5mm audio cable
• Instruction Manual
COMPONENT IDENTIFICATION:
1. Play/Pause/Handsfree
2. Volume down
3. Volume up
4. Power ON/OFF/Mode
5. 3.5mm AUX input
6. Micro USB charging port
7. Charging LED
8. Microphone
9. LED
FEATURES:
1. Bluetooth® 5.0 +EDR (Enhanced Data Rate)
2. TWS (True Wireless Stereo)
3. Handsfree telephone calling
5. Operating distance up to 9.1m (30’)
6. Operation time up to 8 hours
(medium volume level)
7. Battery recharges in approx. 1.5 hours
8. 3.5mm line-in
9. Fabric acoustic skin
OPERATING INSTRUCTIONS
CHARGING
Use the included USB charging cable to fully charge the speaker before
fi rst use. It will take approximately 1.5 hours to fully charge. Charging will
take longer if you play music while you charge the speaker.
• The red LED will be ON while the speaker is charging
• The red LED will turn OFF once charging is complete
• The speaker will beep every 30 seconds if the battery is low
• Connect the USB charging cable to the speaker’s DC 5V port on the
speaker’s side, and plug the cable into any USB-compatible charger
• Unplug the speaker once it is fully charged
PAIRING
When pairing a Bluetooth
®
device, make sure the audio device is within
9.1m (30’) of the speaker. Diff erent environments may aff ect the working
distance.
1. Press and hold the power ON/OFF button to turn the speaker ON. The
white LED will blink.
2. Turn the Bluetooth® ON in your device settings, and select “Square
Spk”. If your device requires a password, enter “0000”.
3. Once paired successfully, the LED will slowly blink white.
4. Adjust the volume on your audio device to your desired level.
5. Make further adjustments to the volume by pressing +/- on the
speaker.
6. Play the next or previous song by holding down the +/- buttons.
7. Press the button to pause and play the music.
8. If you fail to pair your device, or you want to pair it with a new device,
please repeat the steps outlined above.
NOTE: The next time you turn the speaker ON, it will connect
automatically as long as the Bluetooth® function on your device is
switched ON and is within range. When you disconnect the speaker
while paired the white LED will blink quickly and the speaker will enter
into pairing mode. If no device is paired within 30 minutes, and no music
is played, the speaker will turn OFF.
IMPORTANT: This speaker is compatible with select Bluetooth®
audio profi les, including HFP, A2DP and AVRCP. Please refer to your
Bluetooth® device’s manual/technical support to determine your device’s
compatibility.
TWS (TRUE WIRELESS STEREO) CONNECTION
Two Mini Squared speakers can be synced and connected through TWS
to build a left and right stereo sound system for surround sound. To
connect:
1. Press and hold the Power ON/OFF button on each speaker to turn
both ON.
2. Press twice quickly on your primary speaker to enter TWS mode,
you will hear a beep when the two speakers are paired (approximately
10 seconds.)
3. Once the second speaker is paired, the white LED on the primary
speaker will be ON, the white LED on the secondary speaker will fl ash.
4. Turn the Bluetooth® ON for your audio device and connect to the
primary speaker.
5. Stream music from your audio device, and both speakers will work as
a surround sound stereo experience.
NOTE: Once paired, the two speakers will automatically pair each time
they are turned ON, Should you wish to unpair them, press the power
button on either speaker twice. The speaker will beep and both LEDs will
fl ash indicating that the speakers are no longer paired.
HANDSFREE SPEAKERPHONE
When a smartphone is connected to your speaker, follow the steps
below to take calls handsfree. To pair your device, please refer to the
PAIRING section.
1. If there is an incoming call while streaming music the speaker will
pause music and play your ringtone to notify you about the call.
2. Press the button to pick up the call.
3. Press the button again to hang up the call.
NOTE: The microphone is located on the speaker’s front, top right
corner.
AUX IN
1. Use the supplied 3.5mm audio cable to connect the speaker directly
with your device.
2. The white LED will remain solid.
3. Adjust the volume on your audio device to your desired level.
4. Make further adjustments to the volume by pressing +/- on the
speaker.
5. Press the button to mute the system’s audio.
6. When the 3.5mm audio cable is unplugged, the speaker will return to
the previous Bluetooth® connection.
UNDERSTANDING THE LED STATUS LIGHTS
• When charging your speaker
o Solid red LED=charging
o Red LED OFF=charging complete
• When pairing your speaker to a Bluetooth® device
o Quick blinking white LED=Bluetooth® not connected, ready to pair
o White LED blinking slowly=Bluetooth® connected
• When pairing your speaker to a Bluetooth® device in TWS mode
(only the master device can be paired)
o LED fl ashing slowly=Bluetooth® not connected
o LED fl ashing ever few seconds=Bluetooth® connected
• When connected via line-in
o Solid white LED=connected
8080288/89/90
MINI SQUARED WIRELESS SPEAKER
Instruction Manual
The Source warrants that this product will be free from defects in materials and workmanship for a period of twelve (12) months from the date of purchase. Within this period, simply take the product and your proof
of purchase to any The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this
warranty.
This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not
confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces and other governmental entities in which
The Source operates. This warranty is subject to all statutory rights you may have in Canada.
Imported by:
The Source, Barrie, Ontario, Canada, L4M 4W5
Manufactured in China
www.thesource.ca
© 2019 The Source. All rights reserved.
Please
Recycle
THE SOURCE - WARRANTY
• When muted/paused
o Slowly blinking white LED=muted
SPECIFICATIONS
Bluetooth® Version: Bluetooth® 5.0+EDR
Bluetooth® Profi les: A2DP/AVRCP/HFP*
Battery Capacity : 3.7V, 500mAh
Frequency Response: 80Hz-20kHz
Operation Distance: Up to 9.1m (30’)
Output Power: 3W (max)
Impedance: 3Ω
NOTE: This speaker is in compliance with the specifi ed Bluetooth®
version. It does not guarantee compatibility with all the functions on
every Bluetooth® enabled device. Please check your smartphone’s user
manual for compatibility and functionality.
TROUBLESHOOTING
No power
• Power ON the speaker and charge the battery
No sound
• Increase the volume on your speaker and Bluetooth
®
device
• Ensure the connected device is playing audio
Poor sound quality
• Turn down the volume of the speaker and/or the connected device
Speaker will not pair with Bluetooth
®
device
• Ensure Bluetooth
®
is ON and within range
• Move your device and/or the speaker away from electromagnetic
interference
WARNING: Changes or modifi cations to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority for
recycling advice.
When electrostatic discharge occurs, this product may malfunction. To
restore the function, restart or reset the speaker for recovery.
WARNINGS
Follow these precautions to prevent the battery from leaking, overheating
or catching on fi re.
• DO NOT immerse in any kind of water
• DO NOT expose to extreme temperatures, including direct sunlight
• DO NOT use this speaker at a high volume for extended periods, as
this may cause permanent hearing damage or loss
• DO NOT strike or throw the product
• DO NOT use chemicals or detergents to clean the speaker
• DO NOT scrape the surface with sharp objects
• DO NOT make unauthorized alterations to this product
• Protect from excessive static electricity
• Keep the speaker away from fi re, liquids, extreme temperatures and
strong magnetic fi elds
• Store batteries at room temperature and charge them to about
30-50%
• Handle with care
• Please follow the Waste Battery Recycling guideliness to dispose of
the speaker
RSS 247
This device complies contains licence-exempt transmitter/receiver that
comply with Innovation Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
IC: 255A-8080288
Questo manuale è adatto per i seguenti modelli
2
Altri manuali The Source Altoparlanti
