THORLABS PDA8000-1 Manuale utente
__________________________________
Operation Manual
Thorlabs Instrumentation
PRO8000 (-4) / PRO800
Photo current module PDA8000
2012
_______________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
Version: 3.2
Date: 27.03.2012
Copyright©2012, Thorlabs
_______________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
Contents Page
1General description of the PDA8000 2
1.1 Safety 2
1.2 Features 4
1.3 Technical data 5
1.4 Operating elements at the front of the module 6
1.5 Presettings 7
1.5.1 Offset adjustment 7
1.6 Connecting the photodiode 7
2Operating the PDA8000 8
2.1 Functions in the main menu 8
2.1.1 Display 8
2.1.2 Selecting a module 8
2.2 Functions in the channel menu 9
2.2.1 Display 9
2.2.2 Changing parameters 10
2.2.3 Selecting the polarity of the photo diode 11
2.2.4 Calibrating the photo diode 11
2.2.5 Setting the bias voltage 11
2.2.6 Switching on the bias voltage of the photo diode 12
2.2.7 Setting the measurement range 12
2.2.8 Measuring the forward voltage (option PDA8000-FWD) 13
2.3 Display error messages 13
3Communication with a control computer 14
3.1 General information 14
3.1.1 Nomenclature 14
3.1.2 Data format 14
3.2 Commands 15
3.2.1 Selecting the module slot 15
3.2.2 Selecting a port (PORT) 15
3.2.3 Calibrating a photo diode (CALPD) 15
3.2.4 Programming the forward current (IFWD) 16
3.2.5 Reading the photo diode current (IPD) 16
3.2.6 Switch the bias voltage on and off (PDBIA) 17
3.2.7 Select the photo diode polarity (PDPOL) 17
3.2.8 Reading the optical power (POPT) 18
3.2.9 Selecting the measurement range (RANGE) 18
3.2.10 Querying the module type 19
_______________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
3.2.11 Programming the bias voltage (VBIAS) 19
3.2.12 Reading the forward voltage (VFWD) 20
3.3 IEEE error messages of an PDA8000 21
3.4 Status reporting 22
3.4.1 Standard event status register (ESR) 23
3.4.2 Standard event status enable register (ESE) 23
3.4.3 Status byte register (STB) 23
3.4.4 Service request enable register (SRE) 24
3.4.5 Reading the STB by detecting SRQ 24
3.4.6 Reading the STB by "*STB?" command 24
3.4.7 Reading the STB by serial poll 24
4Service and Maintenance 25
4.1 General remarks 25
4.2 Troubleshooting 25
5Appendix 28
5.1 Warranty 28
5.2 Thorlabs “End of Life” policy (WEEE) 29
5.2.1 Waste treatment on your own responsibility 29
5.2.2 Ecological background 30
List of abbreviations 31
5.3 List of figures 32
5.4 Certifications and compliances 33
5.5 Copyright 34
5.6 Addresses 35
_______________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
We aim to develop and produce the best solution for your application in the
field of optical measurement technique. To help us to come up to your
expectations and develop our products permanently we need your ideas and
suggestions. Therefore, please let us know about possible criticism or ideas.
We and our international partners are looking forward to hearing from you.
In the displays shown by the PRO8 you may find the name PROFILE.
PROFILE was the name of the manufacturer before it was acquired by Thorlabs
and renamed to Thorlabs.
Thorlabs
This part of the instruction manual contains every specific information on how to
operate the photo current module PDA8000. A general description is followed by
explanations of how to operate the unit manually. You will also find every information
about remote control via the IEEE 488 computer interface.
Attention
This manual contains “WARNINGS” and “ATTENTION” label in this
form, to indicate dangers for persons or possible damage of equip-
ment.
Please read these advises carefully!
NOTE
This manual also contains “NOTES” and “HINTS” written in this form.
2 Safety
________________________________________________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
1 General description of the PDA8000
1.1 Safety
Attention
All statements regarding safety of operation and technical data in
this instruction manual will only apply when the unit is operated
correctly.
Before applying power to your PRO8000 (-4) / PRO800 system, make
sure that the protective conductor of the 3 conductor mains power
cord is correctly connected to the protective earth contact of the
socket outlet!
Improper grounding can cause electric shock with damages to your
health or even death!
Modules may only be installed or removed with the mainframe
switched off.
All modules must be fixed with all screws provided for this purpose.
Modules of the 8000 series must only be operated in the mainframe
PRO8000, PRO8000-4 or PRO800.
All modules must only be operated with duly shielded connection
cables.
Only with written consent from Thorlabs may changes to single
components be carried out or components not supplied by Thorlabs
be used.
This precision device is only dispatchable if duly packed into the
complete original packaging including the plastic form parts. If
necessary, ask for a replacement package.
Safety 3
________________________________________________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
Attention
Semiconductor laser modules can deliver up to several 100mW of
(maybe) invisible laser radiation!
When operated incorrectly, this can cause severe damage to your
eyes and health!
Be sure to pay strict attention to the safety recommendations of the
appropriate laser safety class!
This laser safety class is marked on your PRO8000 (-4) / PRO800
plug-in module or on your external laser source used.
Attention
Mobile telephones, cellular phones or other radio transmitters are
not to be used within the range of three meters of this unit since the
electromagnetic field intensity may then exceed the maximum
allowed disturbance values according to EN 50 082-1.
4 Features
________________________________________________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
1.2 Features
Utmost precision
The single or dual channel photocurrent amplifier modules PDA8000 offer a
maximum of precision and sensitivity. The polarity of the photodiode is neverthe-
less free selectable.
Different operating modes
The photodiode may either be operated photovoltaic or photoconductive by setting
a bias voltage of 0 ... 10V.
7 measurement ranges
For a low noise measurement with 15 bit resolution plus sign there are seven
measurement ranges from 10 nA to 10 mA. The lowest, still detectable current is
about 0,1 pA (!)
Optical power measurement
Since the photocurrent amplifier modules can be calibrated by selecting the
photodiode sensitivity they can be used for precise optical power measurements
after calibration.
Forward voltage measurement (optional)
Optionally it will be possible to measure the forward voltage of the photodiode with
a selectable measurement current between 0.01 and 10 mA. (option PDA8000-
FWD).
Extensive filtering
The mains filter installed in the mainframe and the careful shielding of the
transformer, the microprocessor and the module itself will provide an excellent
suppression of noise and ripple.
Selecting the reference ground
Additionally the reference ground for the measurements can be adapted to the
measurement setup.
LabVIEW®- and LabWindows/CVI®-driver
For the PDA8000 Thorlabs supplies LabVIEW®- and LabWindows/CVI®-drivers for
MS Windows 32.
Please refer to our homepage for latest driver updates.
http://www.thorlabs.com
Technical data 5
________________________________________________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
1.3 Technical data
(All technical data are valid at 23 ± 5°C and 35 ±15% humidity)
Photocurrent amplifier module PDA8000-1(2)
General data
Photodiode current range 10 nA ... 10 mA1)
Resolution 16 bit
Polarity of photodiode selectable
Setting range of bias voltage (can be switched off) 0.1 V ... 10 V
Setting range of the photodiode coefficient 0.001 ... 5.000 A / W
Temperature coefficient 50 ppm/K
Input impedance 0(virtual ground)
Operating temperature 0 … + 40°C
Storage temperature - 40 … + 70°C
Forward voltage measurement for channel 1 (opt. PDA8000-FWD)
Measurement technique 2-wire technique
Measurement current 0.01 ... 10 mA (5%)
Measurement range UFWD 0 ... 2 V2)
Resolution 0.3 mV
Accuracy ± 5 mV
Connectors
Photodiode BNC
Measurement ranges
Current range Resolution Accuracy
10 mA 0.1 A 0.025 % f.s.
1 mA 10 nA 0.025 % f.s.
100 A 1 nA 0.025 % f.s.
10 A 0.1 nA 0.025 % f.s.
1 A 10 pA 0.025 % f.s.
100 nA 1 pA 0.250 % f.s.3)
10 nA 0.1 pA 0.800 % f.s.3)
1other ranges on request
2reduces to 0 ... 1 V for IFWD > 8 mA
3higher accuracy can be reached by repeated measurements
6 Operating elements at the front of the module
________________________________________________________________________________
______________________________________________________________________________________________________
© 2012 Thorlabs
1.4 Operating elements at the front of the module
LED SELect
LED error
Connector jack input 1
Offset adjust input 1
Connector jack input 2
Offset adjust input 2
Figure 1 Operating elements on the PDA8000-2 front panel
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali THORLABS Unità di controllo
THORLABS
THORLABS LS5000 Series Manuale utente
THORLABS
THORLABS LD2000R Manuale utente
THORLABS
THORLABS SPCM A Series Manuale utente
THORLABS
THORLABS SPCM A Series Manuale utente
THORLABS
THORLABS MNA601/IR Manuale utente
THORLABS
THORLABS TED8000 Series Manuale utente
THORLABS
THORLABS ECL1525M-PM Manuale utente
THORLABS
THORLABS WDM8 Series Manuale utente
THORLABS
THORLABS LDM405 Manuale utente
THORLABS
THORLABS ITC8 Series Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
