Tibo Kameleon Touch Manuale utente
Kameleon Touch – User
Manual
Contents
•Safety Information
•Introduction
•First time speaker setup
•Wi-Fi mode
•Alexa setup
•Grouping your Kameleon Audio
pack
•Using the pre-set functions
•Bluetooth mode
•Line In mode
•Additional Information
•Troubleshooting
•Specifications
•Safety Information
Do not share the power socket with another
appliance.
Do not disassemble or attempt to repair the
appliance on your own.
lf you are not using the appliance, pull the power
cord out of the mains socket.
Be careful of the power cord and maintain it as
appropriate.
To ensure safety, do not twist the power cord, do
not pull it out of the socket, do not compress it or
stretch its length.
Do not use the appliance if the supply voltage is
lower than 90V or higher than 240V.
If the supply voltage is lower than 90V, the
appliance may not work and its lifetime may be
affected. lf the voltage is higher than 240V, the
appliance may catch on fire or cause a fire.
Do not wash the appliance or use it in the
bathroom, or it may cause potential injuries and
other problems.
Installation location
Leave sufficient space around the appliance of at
least 5 cm from any wall/obstacle to ensure proper
ventilation and prevent the appliance from
overheating.
The following places are not suitable installation
locations for the appliance:
•An unstable location
•A location near a heat source or in direct
sunlight.
•In a wet or dusty environment
Warning
To prevent suffering an electrical shock or another
accident, do not operate the appliance in a rainy or
humid environment.
Cleaning and maintenance
Use a soft cloth or cotton dipped in a neutral
solution for cleaning the surface of appliances. Do
not use the type of cloth that you use for washing
dishes or aggressive chemical agents.
Storm
lf the appliance is not working properly during a
storm, please disconnect the plug from the power
socket and reinsert it after a minute.
Do not drop small items or a liquid into the
appliance
In the event that you find small items or a liquid
inside the appliance, you see smoke or smell an
odour, immediately disconnect the appliance from
the power grid. Send the appliance to an authorised
service centre.
Repacking the appliance
When sending the appliance by a transport
company, use the original packaging to prevent its
damage during transport.
•Introduction
Thank you for purchasing the TIBO Kameleon
Touch. We hope that your experience with the
Kameleon Touch will be enjoyable for many years
to come.
With Smart Audio capability and controlled by the
FREE TIBO App, the Kameleon Touch can be used
to playback audio in single, stereo or group mode at
the touch of a button. High Resolution audio
streaming via Wi-Fi or Bluetooth makes music from
a wide range of sources immediately available.
Plus, the speaker has five pre-sets which can be
toggled through for thousands of internet radio
stations and playlists. Comes with 3 sets of
interchangeable panels, white dark grey and
walnut, for matching your home décor.
The Spotify software is subject to third party
licenses found here:
https//developer.spotify.com/esdk-third-party-
licenses/
•First time speaker setup
In the box
- Kameleon speaker
- Standard UK plug
- Standard EU plug
- 3 pairs of side panels
- Quick start guide
- Setup warning
Top panel layout
1. Mode/Power Button: (Long press – turn on/off)
(Short press – Choose between
Bluetooth/Wi-Fi/Line in modes)
2. Pre-set Functions: (Choose between selected
pre-sets 1-5)
3. Minus Icon: (Turn volume down)
4. Plus Icon: (Turn volume up)
5. Play/Pause/Pair Function: (Short press – Play
and pause track)
(Long press – Pair device with Bluetooth)
6. Group Function: (Press to group the Touch with
other Smart Audio products)
7. Group Light: (White light when in group mode)
8. Mode Light: (Red light – Wi-Fi mode) (Green
light – Line in mode)
(Blue light – Bluetooth mode)
9. Touch To Talk: (Touch to activate and talk to
Alexa)
Rear panel layout
1. Line In: (3.5mm audio stereo input)
2. WPS Button: Short press to connect to Wi-Fi
3. Plug/Power Input: (Plug power cable into this
port)
Initial setup steps
1. Before using this product for the first time, please
connect the appropriate power cable to the power
input port on the rear.
2. The Kameleon Touch will respond by saying
“Power on, powering up for the first time, please
wait.”
3. Do not do anything until the Kameleon speaker
has finished booting up. The Kameleon speaker will
say “Ready for app setup” when boot up is
complete.
App download
The TIBO app helps you get setup for the first time,
and helps get the most out of your speaker’s
functions. The app is compatible
with iOS and Android smartphones, and can be
downloaded for free on Google Play or in the App
Store.
Altri manuali per Kameleon Touch
1
Indice
Altri manuali Tibo Altoparlanti
Tibo
Tibo Plus 2 Manuale utente
Tibo
Tibo PA500 Manuale utente
Tibo
Tibo Choros 2 Manuale utente
Tibo
Tibo Plus 2.1 Manuale utente
Tibo
Tibo Urban 500 Manuale utente
Tibo
Tibo Plus 1.1 Manuale utente
Tibo
Tibo Vogue 3 Manuale utente
Tibo
Tibo Bond 3 Manuale utente
Tibo
Tibo TI1000 Manuale utente
Tibo
Tibo Plus 1.1 Manuale utente
