Timotion TDH18P Manuale utente

Hand Control Programming-TDH18P

Version 2 July 2019

1 of 11

20190731

User Manual

Hand Control

Programming-

TDH18P

Hand Control Programming-TDH18P

Version 2 July 2019

2 of 11

Contents

Contents .....................................................................................................................................................................2

Disclaimer ..................................................................................................................................................................3

1. User Interface Guide.............................................................................................................................................4

2. Reset....................................................................................................................................................................5

3. Adjusting the Height.............................................................................................................................................6

4. Setting the Memorized Position ...........................................................................................................................6

5. Setting the Upper and Lower Height Limit ............................................................................................................7

6. Presetting the Desk Starting Height .....................................................................................................................8

7. Lock / Unlock .......................................................................................................................................................8

8. Switching Metric and Imperial Unit .......................................................................................................................9

9. Error Codes ........................................................................................................................................................10

10. Power Saving Function - Waking Up the Control .................................................................................................11

Hand Control Programming-TDH18P

Version 2 July 2019

3 of 11

Disclaimer

This user manual is ONLY for generic TiMOTION products. Manufacturers may have altered settings causing

them to differ from this user manual. Please contact the manufacturer for a revised manual if the product

settings are different than this manual.

Hand Control Programming-TDH18P

Version 2 July 2019

4 of 11

1.User Interface Guide

*USB charging ports: For charging electronic devices

3-digit height display

USB charging ports*

Up and down buttons

Safety lock button

Memory setting buttons

Hand Control Programming-TDH18P

Version 2 July 2019

5 of 11

2.Reset

1. Simultaneously press and for 3 seconds. Continue pressing the buttons until both columns are

in lowest position. When finished with the reset, the control box makes a beep sound and the buttons

can be released.

2. When finished with the reset, the display will show starting height.

3. Users must conduct a reset when the desk is operated for the first time.

Hand Control Programming-TDH18P

Version 2 July 2019

6 of 11

3.Adjusting the Height

Press or button until the desk reaches the preferred height.

4.Setting the Memorized Position

TDH18P supports a maximum of 2 memory positions.

How to memorize position:

1. Adjust the desk to the desired height.

2. Press the preferred memory button (1 or 2), with either or for 2 seconds. Once the display

shows P1 or P2, the position is memorized.

3. Press (and hold) button 1 or 2 to move the desk to memorized position. (Note 1)

Note 1: It depends on the control box setting whether the memory button needs to be held or not.

Hand Control Programming-TDH18P

Version 2 July 2019

7 of 11

5.Setting the Upper and Lower Height Limit

A. Setting the upper height limit:

(1) Adjust the desk to the preferred upper height limit.

(2) Press and buttons together less than 3 seconds, holding and release button. (Note 2)

(3) Re-press for more than 3 times in a slow pace.

(4) A beeping sound will notify you that the process has completed.

B. Disable the upper height limit:

(1) Move the desk to the upper height limit that is being set.

(2) Repeat the instruction #2~4 above to disable the upper limit setting.

C. Setting the lower height limit:

(1) Adjust the desk to the preferred lower height limit.

(2) Press and buttons together less than 3 seconds, holding and release button. (Note 3)

(3) Re-press for more than 3 times in a slow pace.

(4) A beeping sound will notify you that the process has completed.

D. Disable the lower height limit:

(1) Move the desk to the lower height limit that is being set.

(2) Repeat the instruction #2~4 above to disable the lower limit setting.

Note 2: Some control boxes may not support setting the upper and lower height limit functionality.

Note 3: Over 3 seconds will direct to “Reset”mode.

Hand Control Programming-TDH18P

Version 2 July 2019

8 of 11

6.Presetting the Desk Starting Height

(1) Press button until the desk reaches its lowest position and then release button. Re-press

button again for 5 seconds and the digital display will flash for 10 seconds.

(2) Adjust the starting height number with the or button.

(3) After 10 seconds, the display will stop flashing and this will confirm that you have successfully set the

starting height.

7. Lock / Unlock

(1) Lock: Press the “lock” button for one second or do not touch any buttons for 20 seconds, then the image

will be shown on the display to indicate that the lock was completed successfully (as below image).

(2) Unlock: Hold the “lock” button for 3 seconds to unlock the hand control.

Hand Control Programming-TDH18P

Version 2 July 2019

9 of 11

8.Switching Metric and Imperial Unit

(1) Press memory button 1, 2 and Lock button for 5 seconds.

(2) The digital display will show “C-I”. If there is no further instruction operated within 5 seconds, the system

will go to the normal operation mode.

How to choose a metric unit

Press the button 1, the digital display will show “C”to stand for centimeter.

How to choose an imperial unit

Press the button 2, the digital display will show “I”to stand for inch.

Hand Control Programming-TDH18P

Version 2 July 2019

10 of 11

9.Error Codes

The digital display shows the error codes below to suggest the issues that users may encounter during the

operation. (Note 4)

Error code

Descriptions

000

Resetting

E00

Not reset completely

E01

Overuse protection

E02

Unbalance protection

E03

Anti-collision

E04

T-touch Protection

E11

M1 Motor over-current protection

E12

M2 Motor over-current protection

E13

M3 Motor over-current protection

E21

No Hall sensor from M1

E22

No Hall sensor from M2

E23

No Hall sensor from M3

E31

No current from M1

E32

No current from M2

E33

No current from M3

Note 4: Some control box may not support this function.

Altri manuali per TDH18P

Indice

Altri manuali Timotion Unità di controllo

Timotion

Timotion TC16P Series Manuale utente

Timotion

Timotion TC15P Series Manuale utente

Timotion

Timotion TDH24P Manuale utente

Timotion

Timotion TDH20P Manuale utente

Timotion

Timotion TDH1 Manuale utente

Timotion

Timotion TDH12P Manuale utente

Timotion

Timotion TDH9P Manuale utente

Timotion

Timotion TBB9 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente