4Tion Breezer 3S
3. SAFETY REQUIREMENTS
1. The device should be installed in a location that ensures free and safe access.
2.
3.
4. Avoid direct sunlight.
5. During a lightning storm, turn the device off and unplug it from the mains supply.
6. The device should be disconnected from the power supply system prior to
maintenance or scheduled servicing by pulling out the plug, or, if concealed
wiring is used, it should be disengaged by the power supply switch (section
6.4.2).(section The user is not authorized to perform any repairs or alterations to
the device design.
7. No foreign objects or water should be allowed to get into the device.
8. The device must not be operated if the power supply cord insulation or any part
of the housing are damaged.
9. A protective bar must be installed on the ventilation duct from the outer (street)
side.
10. If any damage or possible signs of malfunctioning are detected, pull the plug out
of the power socket, or disengage the power switch in the case of concealed
wiring (section 6.4.2), and contact an authorized Service Center for advice on
further operation of the device.
Tion Breezer 3S in the Lite configuration is recommended for use in regions
with warm climate. Both Tion Breezer 3S Lite and Tion Breezer 3S Special versions
are recommended for use in environmentally clean regions. To ensure enhanced air
cleaning, Tion Breezer 3S Lite or Special configurations should be outfitted with an
additional AK-XL filter.
The Tion Breezer 3S Lite can be upgraded to Tion Breezer 3S configuration upon the
user’s request. Please contact any authorized Service Center of the Manufacturer to
install optional heater system and AK-XL filter (at additional cost).
The filters are available from the official "Tion" online store tion.global or from
authorized dealers.
