Source loss timeout
Press <UP> or <DOWN> to set Source loss timeout (5-120s)
Press <LEFT> or <RIGHT> to decline or confirm, <SELECT> to accept.
This setting determines how long the IQ Two 2x will wait before using the
Source Loss setting. This time is set in seconds (5-120). Once the
source loss timeout time has been reached, the IQ Two will revert to the
Source Loss timeout setting.
.
DMX rate
Press <DOWN> or <UP> buttons to choose DMX refresh rate value.
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
The DMX refresh rate setting controls how many times per second the device
outputs DMX over 5-pin XLR connectors. Some DMX devices operate using
different refresh rate settings. For high-speed devices like LED walls and
displays, the “Adaptive” option can improve response time by matching the
incoming refresh rate of DMX coming from the source.
ArtNet Idle resend
Press <DOWN> or <UP> to choose ArtNet Idle respond time (0.5s-4.0s)
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
This setting determines the time ArtNet will refresh the signal after idling. Select
0.5s, 1s, 2s, or 4s depending on the application. This only applies to ProPlex IQ
Two DMX connectors set to input mode. Some consoles may not resend a DMX
packet if there is the value is unchanged. ArtNet idle resend time ensures ArtNet
regenerates this unchanged value as some devices like media servers and
moving light need recurring DMX over ArtNet even if no change in values exist.
Universe Format
Press <DOWN> or <UP> to choose how Universe format for DMX ports will be
displayed at the home screen. Press <SELECT> or <RIGHT> to set or
<LEFT> to decline.
Press <LEFT> to return to the home screen.
