Topcon RL-SV1S Manuale utente
INSTRUCTION MANUAL
ROTATING LASER
RL-SV1S
1023100-01-B
i
HOW TO READ THIS MANUAL
Thank you for selecting the TOPCON instrument.
• Please read this instruction manual carefully, before using this product.
• Verify that all equipment is included.
STANDARD SYSTEM COMPONENTS (p. iii)
• The specifications and general appearance of the instrument are subject to change without prior
notice and without obligation by TOPCON CORPORATION and may differ from those appearing in
this manual.
• The content of this manual is subject to change without notice.
• Some of the diagrams shown in this manual may be simplified for easier understanding.
• This manual is protected by copyright and all rights are reserved by TOPCON CORPORATION.
• Except as permitted by Copyright law, this manual may not be copied, and no part of this manual
may be reproduced in any form or by any means.
• This manual may not be modified, adapted or otherwise used for the production of derivative
works.
HOW TO READ THIS MANUAL
ii
Symbols
The following conventions are used in this manual.
Notes regarding manual style
• All company and product names featured in this manual are trademarks or registered
trademarks of each respective organization.
:Indicates precautions and important items which should be read before
operations.
:Indicates the chapter title to refer to for additional information.
:Indicates supplementary explanation.
This is the mark of the Japan Surveying Instruments Manufacturers Association.
iii
STANDARD SYSTEM COMPONENTS
• Please make sure that all of above items are in the box when you unpack.
• Included manganese batteries are to confirm the initial operation.
Please replace them with new alkaline batteries after the initial operation check.
*1) Included accessories vary by package.
*2) For details, refer to the instruction manual of LS-100D.
Rechargeable battery type Dry battery type
1) RL-SV1S Instrument .......................1pc.
2) Remote controller RC-50.................1pc.
(with AA-size dry cell batteries: 2pcs.)
3) Level Sensor LS-80L.......................1pc. or none*1)
(with AA-size dry cell batteries: 2pcs.)
4) Level Sensor Holder Model-6..........1pc. or none*1)
5) Level Sensor LS-100D*2)................1pc. or none*1)
(with AA-size dry cell battery: 1pc.)
6) Level Sensor Holder Model-110*2)
.....1pc. or none*1)
7) Battery holder DB-74C.........................1pc.
8) Ni-MH battery pack BT-74Q ............1pc.
9) AC/DC converter AD-15 ..................1pc.
10) Carrying case ..................................1pc.
11) Instruction manual ...........................1vol.
1) RL-SV1S Instrument....................... 1pc.
2) Remote controller RC-50 ................ 1pc.
(with AA-size dry cell batteries: 2pcs.)
3) Level Sensor LS-80L ...................... 1pc. or none*1)
(with AA-size dry cell batteries: 2pcs.)
4) Level Sensor Holder Model-6 ......... 1pc. or none*1)
5) Level Sensor LS-100D*2)............... 1pc. or none*1)
(with AA-size dry cell battery: 1pc.)
6) Level Sensor Holder Model-110*2)
.... 1pc. or none*1)
7) Battery holder DB-74 .......................... 1pc.
8) D-size dry cell batteries .................. 4pcs.
9) Carrying case ................................. 1pc.
10) Instruction manual .......................... 1vol.
vi
1. PRECAUTIONS FOR SAFE OPERATION ............................................................................ 1
2. PRECAUTIONS ..................................................................................................................... 6
3. LASER SAFETY INFORMATION .......................................................................................... 9
4. NOMENCLATURE ............................................................................................................... 12
4.1 RL-SV1S/RC-50 ........................................................................................................... 12
RL-SV1S Nomenclature............................................................................................ 12
RC-50 Nomenclature ................................................................................................ 13
RL-SV1S/RC-50 Key Operation................................................................................ 14
RL-SV1S/RC-50 Display ........................................................................................... 15
4.2 Level Sensor LS-80L .................................................................................................... 16
LS-80L Nomenclature ............................................................................................... 16
LS-80L Display.......................................................................................................... 17
LS-80L Detective Range........................................................................................... 18
5. PREPARATION AND FUNCTIONS ..................................................................................... 19
5.1 Power Source ............................................................................................................... 19
RL-SV1S (Dry battery type) ...................................................................................... 19
RL-SV1S (Rechargeable battery type) ..................................................................... 21
RC-50........................................................................................................................ 24
LS-80L ...................................................................................................................... 24
5.2 How to set remote controller communication channel .................................................. 25
RL-SV1S ................................................................................................................... 25
CONTENTS
vii
RC-50........................................................................................................................ 25
6. BASIC OPERATION ............................................................................................................ 26
6.1 Setting Up Instrument ................................................................................................... 26
Horizontal Rotation ................................................................................................... 26
Example Operational ................................................................................................ 28
Vertical Rotation........................................................................................................ 28
6.2 Height Alert Function .................................................................................................... 29
How to reset.............................................................................................................. 29
7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS.................................. 30
7.1 Setting Grade................................................................................................................30
How to enter grade value.......................................................................................... 30
How to set grade................................................................................................................................................................... 32
Example of how to set up.......................................................................................... 34
Matching Mode (Manual Slope) ................................................................................ 36
7.2 Line Control (manual vertical beam alignment) ............................................................ 40
7.3 Setting of Various Functions......................................................................................... 44
Selecting MENU........................................................................................................ 44
Masking (Laser beam shutter) setting....................................................................... 45
How to change the rotary head speed ...................................................................... 46
Switching Auto leveling / Manual Mode .................................................................... 47
Setting channel ......................................................................................................... 48
CONTENTS
viii
Sleep mode............................................................................................................... 49
Height Alert ON/OFF................................................................................................. 50
8. CHECK AND ADJUSTING................................................................................................... 51
8.1 Check and Adjust Horizontal Rotation .......................................................................... 51
Horizontal Rotation Grade Error ............................................................................... 51
Horizontal Rotation Cone Error ................................................................................. 55
Grade Setting Error................................................................................................... 56
8.2 Vertical Calibration........................................................................................................ 58
Checking Calibration ................................................................................................. 58
Vertical calibration and adjustment ........................................................................... 59
9. STORAGE PRECAUTIONS................................................................................................. 61
10. HOW TO STORE .................................................................................................................62
11. SPECIFICATIONS ...............................................................................................................63
12. ERROR DISPLAY ................................................................................................................66
13. REGULATIONS.................................................................................................................... 69
CONTENTS
1
1. PRECAUTIONS FOR SAFE OPERATION
For the safe use of the product and prevention of injury to operators and other persons as well
as prevention of property damage, items which should be observed are indicated by an
exclamation point within a triangle used with WARNING and CAUTION statements in this
instruction manual.
The definitions of the indications are listed below. Be sure you understand them before reading
the manual’s main text.
Definition of Indication
WARNING Ignoring this indication and making an operation error could possibly
result in death or serious injury to the operator.
CAUTION Ignoring this indication and making an operation error could possibly
result in personal injury or property damage.
This symbol indicates items for which caution (hazard warnings inclusive) is urged.
Specific details are printed in or near the symbol.
This symbol indicates items which are prohibited. Specific details are printed in or
near the symbol.
This symbol indicates items which must always be performed. Specific details are
printed in or near the symbol.
1. PRECAUTIONS FOR SAFE OPERATION
2
General
Warning
Do not use the unit in areas exposed to high amounts of dust or ash, in areas where
there is inadequate ventilation, or near combustible materials. An explosion could occur.
Do not perform disassembly or rebuilding. Fire, electric shock, burns or hazardous
radiation exposure could result.
When securing the instrument in the carrying case make sure to set all the locks.
Failure to do so could result in the instrument falling out while being carried,
causing injury.
Caution
Do not use the carrying case as a footstool. The case is slippery and unstable so a
person could slip and fall off it.
Do not place the instrument in a damaged case or in a case with a damaged belt.
The case or instrument could be dropped and cause injury
Do not wield or throw the plumb bob. A person could be injured if struck.
Indice
Altri manuali Topcon Livello laser
Topcon
Topcon RL-H2Sa Manuale utente
Topcon
Topcon RL-H3CS Manuale utente
Topcon
Topcon AT-G4 Manuale utente
Topcon
Topcon DT-300 Series Manuale utente
Topcon
Topcon DL-501 Manuale utente
Topcon
Topcon RL-200 2S Manuale utente
Topcon
Topcon RL-H3C Manuale utente
Topcon
Topcon RL-H3CL Manuale utente
Topcon
Topcon RL-SV2S Manuale utente
Topcon
Topcon DL-201/2007 Manuale utente
