Tradinco TRAQC-9 Manuale utente
User Manual
TRAQC-9
TRAQC-9
Calibrators
User Manual
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 2
Content
1. General 5
1.1 Warranty .........................................................................................5
1.2 TRAQC-9 Description.........................................................................6
1.2.1 CE EMC Directive 2014/30/EU ........................................................6
1.2.2 CE Electrical Safety Directive 2014/35/EU........................................6
1.3 Symbols Used ..................................................................................7
1.4 Scope of this manual ........................................................................7
1.5 Indicator Interface............................................................................8
1.6 Navigation .......................................................................................9
1.7 Electrical Connections .....................................................................10
2. TRAQC-9 Types 11
2.1 TRAQC-9 Configurations ..................................................................11
2.2 TRAQC-9 P Pressure........................................................................12
2.3 TRAQC-9 MAVS Milliamp ere and Volt Signals........................................13
2.4 TRAQC-9 CAC Absolute pressure Controller........................................14
2.4.1 TRAQC-9 CAC operating instructions:............................................14
2.5 TRAQC-9 CPC Pneumatic Controller ..................................................15
2.5.1 TRAQC-9 CPC operating instructions: ............................................15
2.6 TRAQC-9 CLPC Low Pressure Controller .............................................16
2.6.1 The TRAQC-9 CLPC operating instructions: ....................................16
2.7 TRAQC-9 CHPC High Pressure Controller............................................17
2.7.1 TRAQC-9 CHPC Operating instructions: .........................................17
2.8 TRAQC-9 CVC ................................................................................18
2.8.1 TRAQC-9 CVC operating instructions:............................................18
3. Operating Instructions 19
3.1 Power On/Off ................................................................................. 19
3.2 Menu ............................................................................................19
3.2.1 Main Menu Structure ...................................................................19
3.3 Zeroing ......................................................................................... 20
3.4 Selecting Pressure Units ..................................................................20
3.5 Pressure Range .............................................................................. 21
3.5.1 Selecting Pressure sensor Auto ranging .........................................21
3.6 Instrument Status ..........................................................................21
4. User Configuration 22
4.1 Pressure Setup...............................................................................22
4.1.1 Averaging on/off.........................................................................22
4.1.2 Averaging setup .........................................................................22
4.1.3 Resolution Setup ........................................................................22
4.1.4 Conversion Table ........................................................................23
4.1.5 Set customer unit .......................................................................23
4.1.6 Gauge mode ..............................................................................23
4.1.7 Absolute mode ...........................................................................23
4.1.8 Set abs interval ..........................................................................23
4.1.9 Set Baro.ref.int ..........................................................................23
4.2 Electrical Input Setup......................................................................24
4.2.1 mA Input ...................................................................................24
4.2.2 mA + Xmtr Supply (optional) .......................................................24
4.2.3 Xmtr Power Setup (optional)........................................................ 24
4.2.4 Switch Test................................................................................25
4.2.5 Switch Test Setup.......................................................................25
4.2.6 V Input......................................................................................25
4.2.7 Hart Resistor..............................................................................25
4.2.8 mA/V Scaling .............................................................................26
4.2.9 Set mA/V Scaling....................................................................... 26
4.3 Electrical Output Setup (Optional) ....................................................27
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 3
4.3.1 Pressure xmtr mode (Pressure transmitter mode)...........................27
4.3.2 Xmtr mode settings (Parameter Mode Settings)..............................28
4.3.3 Current Output...........................................................................28
4.3.4 Current Output Settings ..............................................................28
4.3.5 Voltage Output...........................................................................29
4.3.6 Voltage Output Settings .............................................................. 29
4.3.7 Auto Span Check Mode................................................................29
4.3.8 Ramp Mode ...............................................................................29
4.4 Instrument Configuration ................................................................30
4.5 Memory functions ...........................................................................32
4.6 Temperature ..................................................................................32
4.7 Advanced Options...........................................................................32
4.7.1 Set rtc time ...............................................................................32
4.7.2 Set rtc date ...............................................................................32
4.7.3 Set recal Date ............................................................................33
4.7.4 Erase data memory.....................................................................33
4.7.5 Show Product Data .....................................................................33
4.8 Calibration of TRAQC-9.................................................................... 34
4.8.1 Adjust instrument inputs. ............................................................34
4.8.1.1 Current input .........................................................................35
4.8.1.2 Current in + Loop supply (Optional) ..........................................35
4.8.1.3 Voltage input .........................................................................35
4.8.1.4 Adjust Vbat A/D .....................................................................36
4.8.1.5 P1: XX-YY BARG (Pressure Sensor Adjustment) .......................... 36
4.8.1.6 Clear user adjustments ...........................................................36
4.8.1.7 Resistance input .....................................................................36
4.8.2 Adjust instruments outputs (Optional)...........................................37
4.8.2.1 Current source ....................................................................... 37
4.8.2.2 Current simulator ...................................................................37
4.8.2.3 Voltage output .......................................................................38
4.8.3 Show calibration factors ..............................................................38
5. Data transfer 39
6. Computer Interface (Optional) 39
6.1 General Description ........................................................................39
6.2 Connections ................................................................................... 39
6.3 RS232 Settings ..............................................................................39
6.4 Ethernet Settings ...........................................................................39
7. Maintenance instructions 40
7.1.1 Housing.....................................................................................40
7.1.2 Test connections.........................................................................40
7.1.3 Regulating valves .......................................................................40
8. Product Specifications 41
8.1 General .........................................................................................41
8.2 Measurement .................................................................................41
8.3 Generation and control....................................................................41
8.3.1 Traqc-9 P ..................................................................................41
8.3.2 Traqc-9 CLPC Low Pressure Controller ........................................... 41
8.3.3 Traqc-9 CHPC High Pressure Controller..........................................41
8.3.4 Traqc-9 CPC Pressure Controller ...................................................41
8.3.5 Traqc-9 CVC Vacuum Controller ...................................................42
8.3.6 Traqc-9 CAC Absolute Pressure Controller...................................... 42
8.4 Options & Accessories .....................................................................43
8.4.1 Standard Supply includes ............................................................43
8.4.1.1 TRAQC-9 P /MAVS ..................................................................43
8.4.1.2 TRAQC-9 Controller.................................................................43
8.4.2 Optional Supply..........................................................................43
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 4
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 5
1. General
1.1 Warranty
During the design and manufacturing of this instrument the at most attention has been given to
quality and durability.
This manual contains information needed for the safe and effective use of the
capabilities of the instrument.
Please read the manual carefully before operating the instrument. By doing so
possible damage to the instrument or damage caused by the incorrect use of the
instrument can be avoided.
TRADINCO INSTRUMENTS warrantees the instrument in accordance with the Standard Terms
and Conditions of the Instrument Trade as issued by the Association bearing the name
"Federation Het Instrument" (The Instrument Federation, (filed with the Clerk of Utrecht District
Court on 13 January 1993 under number 16/93 and with the Chamber of Commerce and
Industry in Amersfoort on 18 January 1993. A copy is available on request.
TRADINCO INSTRUMENTS warrantees that this product will be free from defects in materials
and workmanship for a period of 5 years from the date of shipment. If any such product proves
defective during this warranty period, TRADINCO INSTRUMENTS, at its option, will either repair
the defective product without charge for parts or labour, or will provide a replacement in
exchange for the defective product.
In order to obtain service under this warranty, Customer must notify TRADINCO INSTRUMENTS
of the defect before the expiration of the warranty period and make suitable arrangements for
the performance of the service.
Customer shall be responsible for packaging and shipping of the defective product to the service
centre designated by TRADINCO INSTRUMENTS, with shipping charges prepaid.
If no defect can be found Customer may be charged for costs of the investigation.
This warranty does not apply to any defect, failure or damage caused by:
a. Improper use of the instrument.
b. Battery leakage.
c. Normal wear of the product.
d. Modification or repair carried out by or on behalf of the owner or by a third party.
e. Implementation of modifications to the product that are not supplied or implemented by
TRADINCO INSTRUMENTS.
TRADINCO INSTRUMENTS and its vendors will not be liable for any indirect, special, incidental
or consequential damages irrespective of whether TRADINCO INSTRUMENTS or the vendor has
advance notice of the possibility of such damages.
The type number of the product, as listed on the instrument tag plate, should always be
mentioned in any correspondence concerning the product.
Tradinco Instrumenten-Apparaten b.v.
Radonstraat 250
2718 TB Zoetermeer
The Netherlands
+31 79 2033133
www.tradinco.com
info@tradinco.com
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 6
1.2 TRAQC-9 Description
The Tradinco pressure calibrator TRAQC-9 is a universal pressure calibrator with a measuring
range from -1 to 1000 barg, depending on the pressure sensors fitted in the instrument.
The calibrator comes in several types such as:
Absolute
Vacuum
Gauge
Compound
The TRAQC-9 consists of 3 main parts:
A high quality digital pressure display with curser and two function push buttons.
One or more pressure sensors plus related pneumatic circuit.
An electrical measuring circuit (standard mA + V DC)
The built-in central microprocessor has been programmed with the individual pressure and
temperature characteristics of each installed sensor and continuously calculates the correct test
pressure in a temperature range from 5 to 45 degrees C.
The internal electronics are also checked and compensated continuously.
The built-in measuring cells are protected against overpressure and the calibrator warns the
user if a measuring range is exceeded.
This manual includes the following TRAQC-9 types:
TRAQC-9 P
TRAQC-9 MAVS
TRAQC-9 CAC*
TRAQC-9 CPC*
TRAQC-9 CLPC*
TRAQC-9 CHPC*
*The TRAQC-9 Controller types will be used in combination with the TRAQC-9 P.
1.2.1 CE EMC Directive 2014/30/EU
The electrical part of the TRAQC-9 meets the regulations according to the standards listed
below:
EN-IEC 61000-4-2 : 2009
EN-IEC 61000-4-3 : 2009
EN-IEC 61000-4-4 : 2012
EN-IEC 61000-4-5 : 2009
EN-IEC 61000-3-2 : 2014
EN-IEC 61000-3-3 : 2013
The unit is CE marked accordingly
1.2.2 CE Electrical Safety Directive 2014/35/EU
The electrical part of the TRAQC-9 meets the regulations according to the standard listed below:
EN 61010-1 : 2010
The unit is CE marked accordingly
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 7
1.3 Symbols Used
Warning for conditions or practices that could result in personal injury, loss of life and/or
in damage to the product or other property.
Attention signal or remark
1.4 Scope of this manual
This manual contains information for instruments built after January 2011.
This manual is an user manual on how to operate the instrument; it is not a calibration
instruction manual.
As Tradinco Instruments continuously strives to improve its products, specifications of
instruments may be altered without further notice
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 8
1.5 Indicator Interface
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 9
1.6 Navigation
The menu can be accessed when the calibrator is in measuring mode (see figure).
Navigating through the menu is possible by pressing the function keys (F1, F2 and F3) and the
‘ARROW’ keys. Above the function keys in the display, the meaning of the function keys is
indicated. By pressing one of the function keys below the display, the menu opens.
By pressing the ‘BACK’ key (F3) results in going one level back.
The menu consists of multiple options to choose from. The option in the black bar is the one
selected. By pressing the navigation keys up or down, another option in the menu can be
selected.
User Manual
TRAQC-9
TRAQC-9 04/2017 EN Rev.4 page : 10
1.7 Electrical Connections
The “Electric Connections Layout” in the display references
the physical layout of these 4 banana socket. (Example see
figure).
The letters A,B,C and D are for identification purposes and
will be of reference, in this manual only.
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali Tradinco Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
