Transition Networks E-MUX-SA05 Manuale utente

Altri manuali Transition Networks Interruttore

Transition Networks

Transition Networks E-FX-HB-0800 Manuale utente

Transition Networks

Transition Networks SISPM1040-384-LRT-C Manuale utente

Transition Networks

Transition Networks SISPM1040-3166-L Manuale utente

Transition Networks

Transition Networks SM24DPa Manuale

Transition Networks

Transition Networks E-TBT-HB-0802 Manuale utente

Transition Networks

Transition Networks E-PSW-TX-02 Manuale utente

Transition Networks

Transition Networks LANMaster T8-FL Manuale utente

Transition Networks

Transition Networks StackMaster SMHB-E-FL-12 Manuale utente

Transition Networks

Transition Networks E-TBT-HB-0403 Manuale utente

Transition Networks

Transition Networks SM24DP4XA Manuale utente

Transition Networks

Transition Networks E-TBT-HB-0400 Manuale utente

Transition Networks

Transition Networks SISPM1040-582-LRT Manuale utente

Transition Networks

Transition Networks SISPM1040-3 L Series Manuale utente

Transition Networks

Transition Networks SISTF1010-180-LRT Manuale utente

Transition Networks

Transition Networks SISPM1040-582-LRT Manuale utente

Transition Networks

Transition Networks SM24T6DPA Manuale utente

Transition Networks

Transition Networks SM24-100SFP-AH Manuale utente

Transition Networks

Transition Networks MIL-SEM24T4GPA Manuale utente

Transition Networks

Transition Networks SM24TAT4GPA Manuale utente

Transition Networks

Transition Networks SM8TAT2SA Manuale di istruzioni

Transition Networks

Transition Networks SISPM1040-384-LRT-C Manuale utente

Transition Networks

Transition Networks SM24DPB Manuale utente

Transition Networks

Transition Networks SISTM1040-262D-LRT Manuale utente

Transition Networks

Transition Networks Milan MIL-SM8002TG Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Jabber: Flashing or lit LED indicates jabber on the line

Collision: Occasional or on LED indicates line collisions

Power: Lit LED indicates normal operation

FCC Regulations:

NOTE: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harm-

ful interference when the equipment is operated in a commercial envi-

ronment. This equipment generates, uses, and can radiate radio fre-

quency energy and, if not used in accordance with the instruction manu-

al, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interfer-

ence in which case the user will be required to correct the interference

at his own cost.

NOTE: This digital apparatus does not exceed the Class A limits for

radio noise for digital apparatus set out on the radio interference regula-

tions of the Canadian Department of Communications.

Trademarks:

ST is a registered trademark of AT&T.

Ethernet is a registered trademark of Xerox Corporation, Inc.

Technical Support:

For more information about this product or other TRANSITION

Networks products, call you local Transition distributor. Or contact us

by phone at (612) 941-7600 or fax at (612) 941-2322.

P/N 7320.A

ETHERNET MULTIMEDIA

QUAD AUI FAN OUT

E-MUX-SA05

About the Multimedia Quad Fan Out:

The TRANSITION Networks Quad AUI Fan Out allows the user to inter-

connect up to four workstations, hubs or fanouts together (five with the

optional slide in card feature). The externally powered AUI Fan Out has

four standard AUI (DB-15 male) connections and an expansion slot for

installing an additional interface. The SIC’s, or slide in cards which are

installed in the expansion slot, can be purchased with either an AUI,

thin coax, 10BaseT or fiber-optic interface. This solution allows the user

added flexibility when installing an Ethernet network, while also reduc-

ing the number of transceivers required.

Power

Collision

Receive

Transmit

Jabber

Transmit

Jabber

Transmit

Jabber

Transmit

Jabber

E N G I N E E R I N G , I N C .

TRANSITION

Ethernet

Multimedia

Quad Fan Out

E-MUX-SA05

Switch setting

Switch Settings

Loopback + No SQE 2

Loopback + SQE 1

No Loopback + No SQE 3

Port 1 Port 2

Port 3 Port 4

Coax, 10BaseT, or Fiber Optional Slide In Card (SIC)

External Power Connection

Jabber: Flashing or lit LED indicates jabber on the line

Collision: Occasional or on LED indicates line collisions

Power: Lit LED indicates normal operation

FCC Regulations:

NOTE: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harm-

ful interference when the equipment is operated in a commercial envi-

ronment. This equipment generates, uses, and can radiate radio fre-

quency energy and, if not used in accordance with the instruction manu-

al, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interfer-

ence in which case the user will be required to correct the interference

at his own cost

ETHERNET MULTIMEDIA

QUAD AUI FAN OUT

E-MUX-SA05

About the Multimedia Quad Fan Out:

The TRANSITION Networks Quad AUI Fan Out allows the user to inter-

connect up to four workstations, hubs or fanouts together (five with the

optional slide in card feature). The externally powered AUI Fan Out has

four standard AUI (DB-15 male) connections and an expansion slot for

installing an additional interface. The SIC’s, or slide in cards which are

installed in the expansion slot, can be purchased with either an AUI,

thin coax 10BaseT or fiber optic interface This solution allows the user

Features of the Quad Fan Out:

* External Configuration Switch

* Optional Slide In Cards for AUI, Coax, Twisted Pair and Fiber-optic

interfaces

* Easy to read LED indicators: Transmit, Receive, Jabber, Collision

and Power

* A two year warranty

* Made in the U.S.A

* UL listed, FCC class A compliant

External Switch Settings:

1) Loopback and SQE: Setting 1 when enabled is used for connecting

workstations using the AUI ports, (No optional slide in card can be

installed).

2) Loopback and No SQE: Setting 2 when enabled is used for connect-

ing hubs or repeaters using the AUI ports, (No optional slide in card can

be installed).

3) No Loopback and No SQE: Setting 3 when enabled for Optional

slide in card. Loopback provided by slide in card, the SQE enabled /

disabled is selectable on the card (switch located on the top of the card).

Using the Quad Fan Out:

The Quad AUI Fan Out can be used to connect 4 workstations, hubs or

fan outs together. This provides a cost effective solution that reduces the

number of transceivers and allows greater flexibility in your network

with the optional slide in interface cards. The Quad Fan Out is not a

repeater and will not extend the distance between segments. The Quad

Fan Out must be used with IEEE approved AUI cables.

Optional Slide in cards:

* Fiber-optic interface, P/N E-FRL-SIC

* Coax interface, P/N E-CX-SIC

* Twisted Pair interface, P/N E-TBT-SIC

The Quad Fan Out Specifications:

Enclosure size: 6.25 inches X 5 inches X 1.3 inches

AUI Connections: IEEE 802 Ethernet cable, 50 meters max

Optional Coax interface: RG-58 - 50 ohm coaxial cable

(610 feet maximum distance)

Optional Twisted Pair interface: Level 4, 2 pair twisted, 330 feet

maximum

Optional Fiber-optic interface: ST connectors, 6,600 maximum distance

Environment: 0-70° C, 5% - 90% humidity non-condensing, 0-10,000

foot altitude

Warranty: 2 year limited warranty

Monitoring The Quad Fan Out LED’s:

Transmit (TX): Flashing or lit LED indicates a packet has been

transmitted

Receive (RX): Flashing or lit LED indicated a packet has been received

Features of the Quad Fan Out:

* External Configuration Switch

* Optional Slide In Cards for AUI, Coax, Twisted Pair and Fiber-optic

interfaces

* Easy to read LED indicators: Transmit, Receive, Jabber, Collision

and Power

* A two year warranty

* Made in the U.S.A

* UL listed, FCC class A compliant

External Switch Settings:

repeater and will not extend the distance between segments. The Quad

Fan Out must be used with IEEE approved AUI cables.

Optional Slide in cards:

* Fiber-optic interface, P/N E-FRL-SIC

* Coax interface, P/N E-CX-SIC

* Twisted Pair interface, P/N E-TBT-SIC

The Quad Fan Out Specifications:

Enclosure size: 6.25 inches X 5 inches X 1.3 inches

AUI Connections: IEEE 802 Ethernet cable, 50 meters max