TRENDnet TVP-SP5G Manuale utente
TVP-SP5G
Quick Installation Guide
Table of Contents
Table of Contents
Version 09.28.2006
English .....................................................................................................
Troubleshooting ........................................................................................
1
1
4
2
6
10
9
1. Before You Start
2. How to Install .....................................................................................
3.
4.
5.
................................................................................
Answering Phone Calls .....................................................................
Making Phone Calls .......................................................................
Quick Reference Sheet ......................................................................
System Requirements
TVP-SP5G
CD-ROM drive
Skype Version 1.1.079 or higher Installed
Computer With An Available USB 1.1 or 2.0 Port
CPU: Pentium 300MHz or Above
Memory: 256 MB or Above
Hard Drive Space: 8MB or Above
Windows 2000/XP
Broadband Internet
Phone jack
Package Contents
1. Before You Start
English
1
Quick Installation Guide
Utility & Driver CD-ROM
RJ-11 Cable
1 Meter USB Cable (mini-USB to
A-type connector)
Note: Skype must be installed before beginning the installation process.
Please visit www.Skype.com for more details.
ClearLink™ VoIP USB
Phone Adapter
(TVP-SP5G)
to ClearLink Skype Phone
TM TM
to Clear
TM
Skype Speakerphone
TM
Link
TM ®
ClearSky Bluetooth
VoIP Phone Kit
TM
(for Skype )
English
2
1. Insert the Utility & Driver
CD-ROM into your computer's
CD-ROM Drive and then click
Install Utility.
2. Click Next.
2. How to Install
3. Follow the InstallShield Wizard
instructions and then click Finish.
4. Select Allow this program to use
Skype. Click OK.
English
3
5. Connect the included USB cable
into the phone, and then connect
the USB cable into an available
USB port on your computer.
7. Click Yes to restart your computer
(Windows 2000).
8. Connect the phone into the port
labeled Phone.
9. Connect the provided RJ-11 cable
into a phone jack and into the port
labeled Line.
6. Drivers will install automatically.
Note: If the computer is on and the device is connected to your phone line, the
device defaults to phone line mode
Your installation is now complete.
For detailed information regarding the TVP-SP5G configuration and advanced
settings, please refer to the User's Guide included on the Utility & Driver
CD-ROM or TRENDnet's website at www.trendnet.com
English
4
2. Pick up the receiver.
4. Pick up the receiver.
1. When the phone rings, the PLED
will be solid white.
3. When the phone rings, the device
will switch automatically to Skype
mode. The VLED will be lit.
3. Answering Phone Calls
Note: This option requires you to follow step 9 in Section 2.
Answering a Call Thorough the Phone Line
(Telephone Mode)
Answering a Call Through Skype (Skype Mode)
English
5
Answering a Regular Phone Call While on a Skype
Phone Call
Answering a Skype Phone Call While on a Regular
Phone Call
7. The PLED will be lit.
11. The VLED will be lit.
5. Listen for ring in the telephone
receiver.
9. Listen for ring in the telephone
receiver.
6. Press #1 on the telephone dial pad
to switch to the incoming call.
10. Press #1 on the telephone dial
pad to switch to the incoming call.
8. Press #1 on the telephone dial pad
to switch back to the Skype call.
12. Press #1 on the telephone dial
pad to switch back to the regular
phone call.
English
6
4. Making Phone Calls
1. If your computer is on, make sure
the PLED on the USB Phone
adapter is solid white.
3. To make a local call, use the
following dialing sequence:
1 + Area Code + Telephone
Number
For example: 1 310 891 1100
2. Pick up the phone receiver and
wait for the dial tone.
4. To make an international call, use
the following dialing sequence:
International Dialing Number +
Country Code + Area Code +
Telephone Number
For example: 011 49 310 891 1100
Note: This option requires you to follow step 9 in Section 2.
Phone to Landline or Cell (Telephone Mode)
English
7
6. Press ## on the telephone dial pad
to switch to Skype mode. Make
sure the VLED is lit. Note: If you
did not plug a RJ-11 cable from
your phone line into the port
labeled, LINE, the device will
already be in Skype mode.
5. Pick up the phone receiver and
wait for the dial tone.
7. To make a call, use the following
dialing sequence:
00 + Country Code + Area Code +
Telephone Number + *
For example: 00 49 310 891 1100 *
Phone to Landline or Cell (Skype Mode)
9. Press ## on the telephone dial pad
to switch to Skype mode. Make
sure the V LED is lit.
8. Pick up the phone receiver and
wait for the dial tone.
10. To make call to a Skype contact,
assign a speed dial number to the
contact in the Skype program,
then use the following dialing
sequence: Speed Dial Number *
For Example: 22*
Phone to Skype Contact
English
8
For more information regarding the TVP-SP5G's advanced functions, please
refer to the User's Guide included on the Utility and Driver CD-ROM or
TRENDnet's website at www.trendnet.com
Altri manuali per TVP-SP5G
2
Indice
Altri manuali TRENDnet Adattatore
TRENDnet
TRENDnet TEW-424UB Manuale utente
TRENDnet
TRENDnet TEW-424UB Manuale utente
TRENDnet
TRENDnet TPE-420E Manuale utente
TRENDnet
TRENDnet TEW-624UB Manuale utente
TRENDnet
TRENDnet TPL-4052E Manuale utente
TRENDnet
TRENDnet TEW-687GA Manuale utente
TRENDnet
TRENDnet TPL-4052E Manuale utente
TRENDnet
TRENDnet TEW-624UB Manuale utente
TRENDnet
TRENDnet TPL-302E2K - Powerline AV Fast EN Adapter Manuale utente
TRENDnet
TRENDnet TBW-106UB Manuale utente
TRENDnet
TRENDnet TEW-808UBM Manuale utente
TRENDnet
TRENDnet TBW-101UB Manuale utente
TRENDnet
TRENDnet TEW-664UB Manuale utente
TRENDnet
TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Manuale utente
TRENDnet
TRENDnet TU2-ET100 Manuale utente
TRENDnet
TRENDnet TEW-424UBK Manuale utente
TRENDnet
TRENDnet TEW-726EC Manuale utente
TRENDnet
TRENDnet TEW-644UB Manuale utente
TRENDnet
TRENDnet TU-ET100C - Manuale utente
TRENDnet
TRENDnet TBW-102UB Manuale utente
