Trikdis CG17 Manuale utente

www.trikdis.com  UAB Trikdis  Draugystės str. 17, LT-51229 Kaunas, Lithuania  +370 37 408 040  inf[email protected]

Cellular security control panel CG17

Installation manual

March, 2019

www.trikdis.com 2 March, 2019

Cellular security control panel

CG17

Contents

SAFETY PRECAUTIONS............................................................................................................................................................ 3

DESCRIPTION ................................................................................................................................................................ 4

DEVICE TYPES ....................................................................................................................................................................... 5

SPECIFICATIONS .................................................................................................................................................................... 5

PURPOSE OF TERMINALS ......................................................................................................................................................... 6

LED INDICATION OF OPERATION ............................................................................................................................................... 7

COMPONENTS NECESSARY FOR INSTALLATION ............................................................................................................................. 7

SCHEMATICS AND INSTALLATION PROCESS................................................................................................................... 7

MOUNTING ......................................................................................................................................................................... 7

SCHEMATICS FOR CONNECTING IO SERIES EXTENSION MODULES ...................................................................................................... 9

SCHEMATICS FOR CONNECTING INPUTS ...................................................................................................................................... 9

SCHEMATICS FOR CONNECTING A SMOKE DETECTOR ..................................................................................................................... 9

SCHEMATICS FOR CONNECTING A TEMPERATURE SENSOR ............................................................................................................. 10

SCHEMATICS FOR CONNECTING A RELAY AND A LED ................................................................................................................... 10

SCHEMATICS FOR CONNECTING CONTACT KEY READERS ............................................................................................................... 11

SCHEMATIC FOR CONNECTING A WIRELESS SENSOR RF-SH TRANSCEIVER ........................................................................................ 11

SCHEMATICS FOR CONNECTING A SIREN ................................................................................................................................... 11

SCHEMATICS FOR CONNECTING OF THE FUEL LEVEL SENSOR STRELA RS485 ................................................................................ 12

SCHEMATICS FOR CONNECTING A BATTERY ........................................................................................................................... 14

SETTING PARAMETERS USING TRIKDISCONFIG SOFTWARE ......................................................................................... 14

DESCRIPTION OF TRIKDISCONFIG STATUS BAR ........................................................................................................................... 15

“SYSTEM OPTIONS” WINDOW ............................................................................................................................................... 16

“REPORTING TO CMS” WINDOW ........................................................................................................................................... 18

“USERS & REPORTING“ WINDOW .......................................................................................................................................... 19

3.4.1 Registration of contact (iButton) keys .................................................................................................................. 20

“MODULES” WINDOW ......................................................................................................................................................... 21

3.5.1 Linking a fuel level sensor STRELA RS485 ............................................................................................................. 22

“WIRELESS” WINDOW ......................................................................................................................................................... 24

3.6.1 Pairing a wireless device RF-SH transceiver to the CG17 ...................................................................................... 24

3.6.2 Pairing wireless sensors (FW2) ............................................................................................................................. 24

3.6.3 Pairing a wireless keyfob (FW2) ........................................................................................................................... 25

3.6.4 Pairing a wireless siren (FW2) .............................................................................................................................. 25

3.6.5 Pairing wireless sensors (SH) ................................................................................................................................ 26

3.6.6 Pairing a wireless keypad (SH) .............................................................................................................................. 27

“ZONES” WINDOW ............................................................................................................................................................. 27

“PGM” WINDOW .............................................................................................................................................................. 29

“SENSORS” WINDOW .......................................................................................................................................................... 32

“SYSTEM EVENTS” WINDOW............................................................................................................................................. 32

“EVENTS LOG” WINDOW ................................................................................................................................................. 33

RESTORING DEFAULT SETTINGS .......................................................................................................................................... 34

REMOTE CONTROL ...................................................................................................................................................... 34

CONTROL WITH PROTEGUS APP ............................................................................................................................................. 34

4.1.1 Arming/disarming the alarm system with Protegus ............................................................................................. 35

4.1.2 Add other users to Protegus ................................................................................................................................. 35

CONTROL USING SMS COMMANDS ........................................................................................................................................ 35

CONTROL USING PHONE CALL ................................................................................................................................................ 37

RECORDING EVENT VOICE MESSAGES ....................................................................................................................................... 38

SETTING PARAMETERS REMOTELY ........................................................................................................................................... 39

TESTING OF THE INSTALLATION .................................................................................................................................. 39

UPDATING FIRMWARE OF THE CG17 ........................................................................................................................... 40

www.trikdis.com 3 March, 2019

Cellular security control panel

CG17

Safety precautions

The electronic intruder alarm system should only be installed and maintained by qualified personnel.

Please read this manual carefully prior to installation in order to avoid mistakes that can lead to malfunction or even damage

to the equipment.

Always disconnect the power supply before making any electrical connections.

Any changes, modifications or repairs not authorized by the manufacturer shall render the warranty void.

Please adhere to your local waste sorting regulations and do not dispose of this equipment or its components with

other household waste.

www.trikdis.com 4 March, 2019

Cellular security control panel

CG17

Description

CG17 is a multifunctional security control panel with an

integrated celullar communicator.

With the CG17 you can:

 Install a simple security system that can be monitored and

controlled remotely.

 Control various equipment remotely (e.g. heating and

ventilation systems, automatic gates)

 Monitor temperature, fuel level, or other parameters.

 Notify users about events.

 Send event notifications to the receiver of a security

company.

Features

Sends events to monitoring station receiver:

 Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.

 Can send event messages to SIA DC-09 receivers.

 Connection supervision by polling to IP receiver every 30 seconds (or by user defined period).

 Backup channel that will be used if connection with the primary channel is lost.

 Events can be reported to CMS with SMS messages. SMS will be sent even if data connection stops working in the mobile

operator network.

 When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

 “Push” and special sound notifications informing about events.

 Remote system Arm/Disarm.

 Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).

 Remote temperature monitoring (with iO or iO-WL expanders).

 Different user rights for administrator, installer and user.

 Users can also be informed about events with SMS messages and phone calls.

Notifies users about events:

 Calls specified phone numbers (up to 8 users) and informs about events using recorded voice messages.

 Sends SMS messages about events.

 “Push” and special sound event notifications using the Protegus app.

Remote system and output control:

 Using Protegus app.

 Using contact (iButton) key reader.

 By calling the device’s phone number.

 Using SMS messages.

 Using an automatic “if...then” algorithm. E.g. when an input is enabled or the temperature exceeds a certain limit, an output

will be turned on.

www.trikdis.com 5 March, 2019

Cellular security control panel

CG17

Supports these expanders:

 iO series wired or wireless expanders, which increase the number of inputs (IN) and outputs (OUT).

 GPS receiver (useful for protecting ATMs and vending machines).

 Fuel level sensor. For protecting fuel tanks or monitoring level.

 Backup power and charging of 12 V battery.

Inputs and outputs

 1 input, 2 outputs and 3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.

 One wire data bus (1-Wire) for connecting temperature sensors (up to 8) and a contact (iButton) key reader.

 Number of inputs (IN) or outputs (OUT) can be increased to 12 using iO series wired or wireless expanders.

Simple installation:

 Default settings for use either as a control panel or as communicator.

 Settings can be saved to file and quickly written to other devices.

 Configuration either using an USB cable or remotely using TrikdisConfig software.

 Two types of access levels (accounts), for the installer and for the administrator.

Device types

This manual applies to these CG17 models:

 CG17_12, CG17 control panel with 2G modem.

 CG17_13, CG17 control panel with 3G modem.

Specifications

Parameter Description

Dual purpose terminals [IN/OUT] 3, can be set as either NC, NO, EOL=10 kΩ type

inputs or open collector (OC) type outputs with

current up to 100 mA

Expandable up

to 12 with iO

series wired or

wireless

expanders

Inputs [IN] 1, selectable type: NC, NO or EOL=10 kΩ

Outputs [OUT] 2, open collector (OC) type, up to 1 A of current

Number of areas 8

1-Wire data bus length [1 WIRE] Up to 30 m

Compatible temperature sensors Maxim®/Dallas® DS18S20, DS18B20

Maximum number of temperature sensors

connected to the 1-Wire data bus

Compatible contact (iButton) keys [1 WIRE] Maxim®/Dallas® DS1990A

Maximum number of contact (iButton) keys 12

RS485 data bus length Up to 300 m

Maximum number of devices connected to the

RS485 data bus

Buffer memory capacity 60 events

Number of communication channels 2 (1st channel: main, backup; 2nd channel: Protegus)

Internal clock Yes

Event reporting channels GPRS or 3G, SMS, Voice call

Communication with CMS TCP / IP or UDP / IP, or SMS

Communication protocols TRK, encrypted DC-09_2007 or DC-09_2012

www.trikdis.com 6 March, 2019

Cellular security control panel

CG17

Purpose of terminals

1. SMA type connector for GSM antenna

2. LED indicator lights

3. Slot for opening the top lid

4. Terminal blocks for external connections

5. USB Mini-B port for programming the CG17

6. Nano SIM card slot

Terminal Description

AC / +DC Power supply terminal (16-18 V AC or positive 16-24 V DC)

AC / -DC Power supply terminal (16-18 V AC or negative 16-24 V DC)

BAT+ Positive terminal of the 12 V backup battery

BAT- Negative terminal of the 12 V backup battery

+5 V Positive 5 V power terminal for 1-Wire devices

1 WIRE 1-Wire data bus terminal

A 485 Terminal A of RS485 bus

B 485 Terminal B of RS485 bus

1 IN 1st input terminal (default setting “Delay”, zone type EOL)

2 I/O Input / output terminal: 2nd input terminal or output terminal of OC type. (default setting “Interior”,

zone type EOL)

COM Common negative terminal

GSM/GPRS modem frequencies 850 / 900 / 1800 / 1900 MHz

3G modem frequencies 800 / 850 / 900 / 1900 / 2100 MHz

Power supply [AC / +DC] 16-24 V DC or 16-18 V AC

Current consumption Up to 50 mA (stand-by),

Up to 200 mA (short-term, transmitting)

Backup power supply [BAT] 12 V lead – acid battery

Battery charge current Up to 500 mA

Power supply voltage and current for external

devices [+12 V]

12 V DC, up to 1000 mA

Operating environment From -10 °C to + 50 °C, relative air humidity up to 70% at 0- +40 °C (no

condensation)

Dimensions 95 x 65 x 25 mm

Weight 0.10 kg

www.trikdis.com 7 March, 2019

Cellular security control panel

CG17

Terminal Description

3 I/O Input / output terminal: 3rd input terminal or output terminal of OC type. (default setting “Instant”,

zone type EOL)

4 I/O Input / output terminal: 4th input terminal or output terminal of OC type. (default setting “Fire”, zone

type EOL)

+12 V Positive 12 V power terminal for external devices

5 OUT Output terminal of OC type (default setting “Fire sensor reset”)

6 OUT Output terminals of OC type (default setting “Siren”)

LED indication of operation

Indicator Light status Description

NETWORK

Green solid Connected to GSM network

Yellow blinking Indication of GSM signal strength from 0 to 5. Sufficient strength is 3.

DATA

Green solid Message is being sent

Yellow solid There are unsent events in the data buffer

POWER

Green blinking The power supply voltage is sufficient

Yellow blinking The power supply voltage is insufficient

Green and yellow blinking Configuration mode is on

TROUBLE

Off No operational problems

1 blink No SIM card inserted

2 blinks The PIN code of the SIM card is incorrect

3 blinks Unable to connect to GSM network

4 blinks Unable to connect to the IP receiver using the primary channel

5 blinks Unable to connect to the IP receiver using the backup channel

6 blinks Internal clock of the CG17 is not set

7 blinks Insufficient power supply voltage from the backup supply

8 blinks No AC power

9 blinks Problems with the connection to the RS485 module

Components necessary for installation

Before beginning installation, make sure you have the necessary components that you can order from your local retailer.

Schematics and installation process

Mounting

1. Before beginning, make sure that the GSM signal level is sufficient in the place where the CG17 will be mounted.

2. Remove the top lid, remove the plug parts of both terminal blocks.

3. Remove the PCB.

www.trikdis.com 8 March, 2019

Cellular security control panel

CG17

4. Fasten the base of the casing in the desired place using screws.

5. Reinsert the PCB and terminal blocks.

6. Screw the GSM antenna in.

7. Insert a nano-SIM card. The SIM card must already be activated in the GSM network and all required services must be

enabled, i.e., the card must be able to call, send and receive SMS messages, use mobile internet. Ask your SIM card’s

mobile network operator how to enable the required services.

Note: Make sure that the SIM card is activated.

Make sure that the mobile internet service is turned on if connection via the IP channel will be used.

If you do not want to enter the PIN code in TrikdisConfig, insert the SIM card into a mobile phone and disable

PIN code requests.

8. If you want to be able configure the CG17 remotely, insert a SIM card with disabled PIN code requests. Send an SMS

message: CONNECT 123456 PROTEGUS=ON,APN=INTERNET

9. Remote configuration is described in chapter 4.5 “Setting parameters remotely”.

10. Close the top lid.

www.trikdis.com 9 March, 2019

Cellular security control panel

CG17

Schematics for connecting iO series extension modules

Note:

 If the wire connecting the temperature sensor is longer than 0,5 m, it is recommended to use a twisted pair cable

(UTP4x2x0,5 or STP4x2x0,5).

 To one CG17 you can connect:

o Up to four iO-MOD modules.

o Up to eight iO or / and iO-WL modules.

 iButton key readers and temperature sensors should be connected to the 1-Wire terminal.

Schematics for connecting inputs

The CG17 has four inputs IN for connecting various alarm system sensors. Possible ways to connect a sensor: NO – normally

open contact; NC- normally closed contact; EOL – normally closed circuit with a 10kΩ end of line resistor. Possible connection

schematics:

Schematics for connecting a smoke detector

Assign a PGM output the function Fire sensor reset (see TrikdisConfig window “PGM” –> “Outputs” tab) so that the smoke

detector can be restarted after an alarm.

 Connecting a four-wire smoke detector

www.trikdis.com 10 March, 2019

Cellular security control panel

CG17

 Connecting a two-wire smoke detector

a) using an EOL zone (or NC, no resistor).

b) using an EOL zone (or NO, no resistor).

*SM1 – a compatibility module made by Trikdis that allows to remotely restart a two-wire smoke detector after a triggered

alarm.

Schematics for connecting a temperature sensor

 Temperature sensors should be connected according to the

given schematic. Maxim®/Dallas® DS18S20, DS18B20

temperature sensors (up to 8 units) can be connected to the

CG17.

 If the wire connecting the temperature sensor is longer than

0,5 m, we recommend using a twisted pair cable

(UTP4x2x0,5 or STP4x2x0,5).

Wire colors:

RED – Vdd, connect it to the +5 V terminal;

YELLOW – DQ, connect it to the 1-Wire terminal;

BLACK – GND, connect it to the COM terminal.

Schematics for connecting a relay and a LED

Indice

Altri manuali Trikdis Pannello di controllo

Trikdis

Trikdis FLEXi SP3 Manuale utente

Trikdis

Trikdis SP231 Manuale utente

Trikdis

Trikdis FLEXi SP3 Istruzioni per il montaggio

Trikdis

Trikdis FLEXi SP3 Manuale utente

Trikdis

Trikdis FLEXi SP3 Manuale utente

Trikdis

Trikdis SP231 Istruzioni per il montaggio

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche