TRINITY Pro TLSF-7209 Manuale utente
OWNER’S MANUAL
Important / Important / Importante
DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE| DESCARGUE LAAPLICACIÓN GRATUITA
Directives intelligentes
Instrucciones Inteligentes
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D
TRINITY PRO 72” 12-DRAWER STAINLESS STEEL
ROLLING WORKBENCH
Model # TLSF-7209
Your TRINITY PRO 72in 12-Drawer Stainless Steel Workbench should include the following parts. Please
inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
You will need 14mm wrench (for casters) for assembly. This is NOT included.
ABC
CASTER BOLT (16)
M10
D
LINER (12)
E
LOCKING
CASTER (2)
F
NON-LOCKING
CASTER (2)
KEY (2)
WORKBENCH (1)
PARTS LIST
© 2021 TRINITY - 800.985.5506
1
ASSEMBLY INSTRUCTIONS
STEP 1
Location of parts:
1) KEYS (F) are hooked to the key leash that is
mounted in the TOP MIDDLE Drawer.
2) 2) CASTERS (B/C) and CASTER BOLTS (D) are
boxed and put in the BOTTOM LEFT Drawer.
3) LINERS (E) are in the BOTTOM RIGHT Drawer
1
2
© 2021 TRINITY - 800.985.5506 2
STEP 2
B (2) C (2) D (16)
Lay WORKBENCH (A) on its backside. Lift
workbench by side handles. Do NOT lift
workbench by the wood top. Two people are
needed. Do NOT attempt this alone.
Position LOCKING CASTERS (B) on side of
WORKBENCH (A) of your choice and align holes to
pre-installed nuts on underside of WORKBENCH
(A). Use a 14mm socket wrench to fully tighten
CASTER BOLT (D) to WORKBENCH (A).
Repeat above steps to install NON-LOCKING
CASTERS (C).
Notes:
* Make sure to install both LOCKING CASTERS (B)
on same side of workbench.
** For ease of use, place LOCKING CASTERS (B) on
side you will regularly push or pull.
*** If you plan to push the workbench against a
wall, place LOCKING CASTERS (B) on front long side
for ease of access.
14mm
A
CB
D
3
ASSEMBLY INSTRUCTIONS
Place LINERS (E) in each drawer.
STEP 3
E (12)
E
© 2021 TRINITY - 800.985.5506
3
USAGE INSTRUCTIONS
DRAWER REMOVAL
DRAWER REPLACEMENT
© 2021 TRINITY - 800.985.5506 4
To replace drawer, pull slides out completely. Insert brackets on each side of Drawer Slides into
corresponding slots on the Workbench Slides, making sure they are properly positioned. Once the
brackets are inserted into the slots, completely close the drawer to set all slides in their proper positions.
Pull drawer out so that it is almost fully extended. On RIGHT-hand side, pull black release lever UP. On
LEFT-hand side, push black release lever DOWN. While holding levers as instructed, pull drawer
forward until released from the slides attached to Workbench (“Workbench Slides”).
Note: The slides attached to drawer (“Drawer Slides”) are an integral part of drawer and must be
removed along with drawer itself.
SERVICE PARTS LIST –TLSF-7209
Part Number Description Part Number Description
1) LNA-06-013-7219 Wood Top 13) XBK-22-006-2615 27” Drawer Liner
2) ZSV-01-001-0612 Handle Bolt 14) ZSV-99-028-5020 Non-locking Caster
3) XSV-05-001-0900 Side Handle 15) XBS-07-009-2709 27” Large Drawer
4) ZSV-12-015-1575 Slide (workbench side) 16) AMA-05-007-2600 27” Drawer Handle
5) ZSV-12-001-1575 Slide (drawer side) 17) XBS-07-009-2706 27” Medium Drawer
6) XBS-07-009-1506 15”1st Medium Drawer 18) XBK-23-010-3012 End cap
7) XBS-07-009-1512 15” Large Drawer 19) XBS-07-009-1509 15” 2nd Medium Drawer
8) ZSV-01-001-1020 Caster Bolt 20) AMA-05-007-1400 15” Drawer Handle
9) ZSV-99-027-5020 Locking Caster 21)XBS-07-009-1503 15” Small Drawer
10) XBK-10-003-0XXX Key 22) XBS-07-009-2703 27” Small Drawer
11) XBK-02-047-0001 Key leash 23) CSV-11-005-0XXX Lock
12) XBK-22-006-1415 15” Drawer Liner
TRINITY Customer Service provides the following replacement parts:
2
5
13
18
20
16
9
21
17
23
NOTE: Replacement keys may be ordered using the code shown on the face of the lock.
8
© 2021 TRINITY - 800.985.5506
5
14
15
3
6
1
7
10
12
22
4
19
11
WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
4. Check for damaged parts. Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a
damaged part.
5. Do NOT overload the product.
6. Lock the casters when leaving workbench in stationary position.
7. Lock the drawers before moving the workbench.
8. Do NOT open more than one drawer at a time. Tipping can occur.
9. Do NOT step or lean on open drawers. Tipping can occur.
10. Do NOT lift workbench by wood top. Wood top may separate causing injury.
11. Do NOT let children play near workbench.
12. Load the workbench starting with the bottom drawers to prevent workbench from
tipping.
13. Make sure all drawers are closed tightly before locking or unlocking.
Weight capacity per drawer w/ 1 pair of slides 100 lb
Weight capacity per drawer w/ 2 pairs of slides 200 lb
Total weight capacity of workbench 2200 lb
© 2021 TRINITY - 800.985.5506 6
© 2021 TRINITY - 800.985.5506
7
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Do not use scouring pad for cleaning.
•Keep dry and avoid damp environments.
•Use a quality stainless steel cleaner and follow instructions that come with the cleaner.
Wipe ALONG the grain (NOT against).
•Wood top can be cleaned with damp cloth and wiped dry immediately with dry cloth. If
needed, solvent-based wood furniture cleaner can be used.
•Clean up any spills immediately to prevent stains from forming on the wood top.
© 2021 TRINITY - 800.98585506 8
Thank you for purchasing a TRINITY PRO 72in 12-Drawer Stainless Steel Rolling Workbench. In order to
register your product and receive streamlined customer service, please fill out the following Product
Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form
online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a
copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TLSF-7209 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2021 TRINITY - 800.985.5506
9
Indice
Altri manuali TRINITY Pro Deposito attrezzi
