Tripp Lite IP Remote Access Unit Manuale utente

Quick Start Guide

IP Remote Access Unit

Model: B051-000

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

All trademarks are the property of their respective owners.

17-11-282 93-373C.indd 1 12/5/2017 4:00:20 PM

Supported Operating Systems

• Compatible with all major operating systems

Remote Console Computer Requirements

Connected Computer/Server Requirements

• Browsers must support 128-bit SSL encryption

• For the browser-based Java Applet and non-browser AP Java Client, the latest version

of Sun’s Java Runtime Environment (JRE) must be installed, and 250 MB of memory

available after installation

• For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher driver installed

• For best results, we recommend the computers used to access the switch have at

least a Pentium III, 1 GHz processor, with their screen resolution set to 1024 x 768

• For best results, we recommend a network transfer speed of at least 512 kbps

• For the browser-based Windows Client, at least 60 MB of memory must be available

after installation

• For the non-browser Windows Client, at least 25 MB of memory must be available

after installation

Computers/servers to be connected to the B051-000 must have the following:

• VGA, SVGA or Multisync port

• For USB Connections: Type A USB port and USB host controller

• For PS/2 Connections: 6-pin mini-DIN keyboard and mouse ports

• B051-000

• 4 ft. USB/PS2 Combo Cable Kit

• 10 in. USB/PS2 Combo Console Cable Kit

• 6 ft. USB 2.0 LUC Cable (5-Pin Mini-B Male to A Male)

• 5 ft. External Power Supply (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5.3V 2.4A)

• Rack-Mount Bracket

• DIN Rail Brackets

• CD with Software and Owner’s Manual

• Quick Start Guide

Package Contents

17-11-282 93-373C.indd 2 12/5/2017 4:00:20 PM

Supported Video Resolutions

Only the following non-interlaced video

signals are supported:

Resolution Refresh Rates

640 x 480 60, 72, 75, 85, 90, 100, 120

720 x 400 70

800 x 600 56, 60, 72, 75, 85, 90, 100, 120

1024 x 768 60, 70, 75, 85, 90, 100

1152 x 864 60, 70, 75, 85

1280 x 720 60

1280 x 1024 60, 70, 75, 85

1600 x 1050 60

1600 x 1200 60

1920 x 1080 60

1920 x 1200 60

Supported Browsers

Supported browsers for users that

remotely log into the B051-000 include:

Browser Version

Internet Explorer (32-bit)* 6 and higher

Chrome 8.0 and higher

Firefox 3.5 and higher

Mozilla 1.7 and higher

Safari 4.0 and higher

Opera 10.0 and higher

Netscape 9.1 and higher

Internet Explorer 64-bit is not supported.

Front View

1LAN Port The Cat5e/6 cable that connects the B051-000 to a network plugs

in here.

2LUC Port This laptop USB console (LUC) port allows a laptop to be used as a

console for accessing the unit.

3Reset

Switch

1. Pressing and releasing this switch will perform a system reset.

2. Pressing and holding the switch for more than 3 seconds restores

the B051-000 to its factory default configuration settings.

3. Pressing and holding this switch while powering the unit on

will restore the factory default firmware version. This operation

should only be performed in the event of a firmware upgrade

failure that results in the device becoming inoperable.

Note: This switch is recessed and must be pushed with a thin object, such as the end

of a paper clip or ballpoint pen.

1 32 4 5 6

17-11-282 93-373C.indd 3 12/5/2017 4:00:20 PM

Rear View

1Power Jack The included power adapter connects to the unit here.

2PC/KVM Port The KVM cable kit that connects the B051-000 to a KVM switch or

server connects to the unit here.

3Console port The console connector kit that connects a Local Console to the

B051-000 connects to the unit here.

4RS-232 port An RS-232 serial port is provided for out-of-band and low

bandwidth modem and serial terminal connections.

1 3 42

Rack Mounting

For convenience and flexibility, the

B051-000 comes with a 0U rack-mount

kit so the unit can be conveniently

mounted on a system rack.

To rack mount the unit:

Remove the two original screws from

the bottom of the unit (near the rear of

the unit).

2.Using the screws and bracket provided

with the rack-mount kit, screw the

mounting bracket into the B051-000

as shown in the diagram.

Front View

410/100/1000

Mbps LED

Indicates the data transmission speed.

LED Color(s) Transmission Speed

Orange 10 Mbps

Orange + Green 100 Mbps

Green 1000 Mbps

5Link LED Flashes green to indicate the B051-000 is being accessed

remotely.

6Power LED Illuminates orange when the B051-000 is powered-on and ready to

operate.

17-11-282 93-373C.indd 4 12/5/2017 4:00:23 PM

DIN Rail Mounting

To mount the B051-000 on a DIN rail:

1.Screw the mounting bracket to the

back of the B051-000 as described in

Steps 1 and 2 of the Rack Mounting

Section.

2. Use the larger screws supplied with the

rack-mount kit to screw the DIN rail

brackets to the mounting bracket as

shown in the diagram.

3.Hang the unit on the DIN rail.

Rack Mounting

Screw the bracket into any convenient

location on the rack.

Note: Rack screws are not provided. Use screws

that are appropriate for your rack.

17-11-282 93-373C.indd 5 12/5/2017 4:00:24 PM

Installation

1Make sure that power to all of the devices you will be connecting is turned off.

2Using the included USB/PS2 Combo Console Cable kit, connect the PS/2 – USB

Console port on the unit to a VGA monitor, and a USB or PS/2 keyboard and

mouse.

Note: You can connect any combination of keyboard and mouse; USB and PS/2, USB and

USB, or PS/2 and PS/2.

3Using either the USB or PS/2 KVM cable kits that came with the unit, connect

the PC/KVM port to the VGA monitor and USB or PS/2 keyboard/mouse ports to a

computer or KVM switch.

Note: The installation diagram shows a USB KVM cable kit. The PS/2 KVM cable kit is the

same, except it has (x2) PS/2 connectors to connect to the PS/2 ports on a computer or KVM

switch. Use the cable kit appropriate to your installation.

4(Optional) Connect a modem or other RS-232 serial device to the unit’s RS-232

serial port.

Using a standard Cat5e/6 patch cable, connect the unit’s LAN port to your network.

6Connect the included external power supply to the unit’s power jack, then plug it

into a Tripp Lite Surge Protector, UPS or PDU.

7(Optional) When using the laptop USB console (LUC) feature, use the included

USB Mini-B cable to connect the unit’s LUC port to a USB port on a laptop.

8Power on your installation, starting with the B051-000, then the computer or KVM

switch followed by any other connected devices.

Network Laptop

(USB, PS/2, KVM

or Computer)

(VGA Monitor and USB

or PS/2 Keyboard/Mouse)

Modem or

RS-232

Serial Device

5 7

23 46

Front Panel

Back Panel

17-11-282 93-373C.indd 6 12/5/2017 4:00:25 PM

Laptop USB Console (LUC)

The unit’s front panel features a USB Mini-B port, which connects to the USB port on a

laptop, to provide console control of the unit. To use this feature, connect your laptop

to the LUC port on the front of the unit using a USB Mini-B cable. When connected,

an extra drive will appear in your computer’s “My Computer” screen. Click on this drive

to open the Windows and Java Non-Browser Clients. Run the desired client to access

the unit. The client’s login screen will appear, with the unit showing up as a USB Mass

Storage device in the Login Screen’s Server List. Highlight the unit, then connect per

the instructions in the Non-Browser Login section of this Quick Start Guide.

Administrator Setup

First Time Setup

Once the B051-000 has been installed, the Administrator must prepare the unit for

user operation by setting the network parameters and adding users.

Network Setup - IP Address Determination

Administrators logging in for the first time must access the B051-000 in order to

provide an IP address so users can connect. You can do this via Web Browser, the

IP Installer utility, or the non-browser Windows or Java Client applications.

Web Browser

By default, the B051-000 is set to have its IP address assigned automatically via

DHCP server. If it is connected to a network without a DHCP server, it boots with

a default IP address. On IPv4 networks, the default IP is 192.168.0.60. If it is on

an IPv6 network, the default IP address is determined by the B051-000’s MAC

address. For example, if the MAC address is 00-10-74-13-81-01, the IPv6 address is

FE80:0:0:0:0010:74FF:FE13:8101. The parts of the IP address that are in bold and

underlined are fixed.

1.Enter the unit’s IP address into your web browser.

2.You may be prompted by a screen stating that there is a problem with this website’s

security certificate. Click on the option to continue to the website anyway. (See

Web Browser Login section for details on installing the security certificate)

17-11-282 93-373C.indd 7 12/5/2017 4:00:25 PM

Administrator Setup

4. Click the Network icon on the side of the page to open Network Settings.

5.By default, the Obtain IP address automatically [DHCP] checkbox is checked. To set

a fixed IP address, check the Set IP address manually [Fixed IP] check box in the

IPv4 or IPv6 settings section, depending on your network.

6.The IP Address, Subnet Mask and Default Gateway fields will be activated upon

checking the Set IP address manually [Fixed IP] checkbox. Fill in these fields with

information appropriate for your network.

3.You will be directed to a login page with Username and Password prompts. The

default Username is administrator and the default Password is password. The

Admin Utility Main Page will open upon entering the Username and Password.

17-11-282 93-373C.indd 8 12/5/2017 4:00:27 PM

Administrator Setup

7. As with the IP Address settings, the DNS Server settings can be obtained

automatically or assigned manually. To manually enter these settings, check the

Set DNS server address manually checkbox and fill in the Preferred DNS server and

Alternate DNS server fields with information appropriate for your network. Note:

The Alternate DNS server field is optional.

8.When you have entered the IP Address and DNS Server settings, click the Apply

button. Clicking the Apply button will automatically check the Reset on exit

checkbox located in the Customization page of the Admin Utility. When you log out,

the unit will be reset and your network changes will be applied.

See Network Settings section in the Owner’s Manual for complete information on the

rest of the settings located in this page.

Non-Browser Client

The included CD contains Windows and Java Client applications that allow you to

remotely access the B051-000 and its Admin Utility without using a web browser.

The applications function is the same. However, the Windows Client is designed for

Windows computers, whereas the Java client is designed for either Windows or non-

Windows computers. When accessed from a computer that is on the same network

as the IP remote access unit, the client will search the network for the device and

display it in a device list for you to access. If accessed from a computer that is not on

the same network as the IP remote access unit, you must obtain the IP address from

your network administrator and manually enter it into the client. (See Web Browser

section above for information on obtaining the IP address) To use the Windows or

Java client to assign a fixed IP address, follow the steps below.

1.Save the Windows or Java client from the CD to a desired location on your

computer. Double-click the file to open it.

2.When accessing the Windows Client for the first time, it will need to be installed

on your computer. Follow the installation prompts that appear. Once installed, a

Windows Client icon will appear on your desktop.

17-11-282 93-373C.indd 9 12/5/2017 4:00:27 PM

Administrator Setup

4.If you are on the same network as the B051-000, the client will locate and display

it in the Device List. In this case, highlight the unit in the device list and click

the Login button. If you are not on the same network as the unit, it will not be

displayed in the list. You must manually enter the IP address in the IP Address field,

then click the Connect button.

3.When accessing either the Windows or the Java client for the first time, you will be

prompted to enter the product serial number, which can be found on the CD. Once

entered, you will not be prompted for it again. The non-browser client connection

screen appears.

17-11-282 93-373C.indd 10 12/5/2017 4:00:27 PM

Indice

Altri manuali Tripp Lite Unità di controllo

Tripp Lite

Tripp Lite Power Accessory Module PAM-2 Manuale utente

Tripp Lite

Tripp Lite AG-0514 Series Manuale utente

Tripp Lite

Tripp Lite APS 1024 INT Manuale utente

Tripp Lite

Tripp Lite SmartRack SRCABLEDUCT1UHD Manuale utente

Tripp Lite

Tripp Lite N482TAP-4SM73LC Manuale utente

Tripp Lite

Tripp Lite B021-000-19-HD2 Manuale utente

Tripp Lite

Tripp Lite HC350S Series Manuale di istruzioni

Tripp Lite

Tripp Lite Power Accessory Module PAM-3 Manuale utente

Tripp Lite

Tripp Lite Power Accessory Module PAM-1 Istruzioni per l'installazione e il funzionamento

Tripp Lite

Tripp Lite PVXXXXFC Manuale utente

Tripp Lite

Tripp Lite SmartOnline SU5000RT4UTFTAA Manuale utente

Tripp Lite

Tripp Lite SmartOnline Series Manuale utente

Tripp Lite

Tripp Lite SRCOOLNET2LX Manuale utente

Tripp Lite

Tripp Lite HC350S Series Manuale di istruzioni

Tripp Lite

Tripp Lite SRCOOLNETLX Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente