Tripp Lite U357-025-SEC Manuale utente
1
Owner’s Manual
USB 3.0 to SATA Encrypted
Hard Drive Enclosure with
Keypad Lock
Model: U357-025-SEC
Español 11 • Français 20 • Русский 29
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
16-11-238-933690.indb 1 12/20/2016 4:20:37 PM
2
Package Contents
Product Features
• U357-025-SEC
• USB 3.0 A to Micro-B Device Cable – 2 ft.
• Owner’s Manual
• Enclosure quickly turns any 2.5” internal SATA hard
drive into an external hard drive
• Real-time 256-bit AES encryption ensures data is
protected
• Keypad lock provides password security for
important documents and files
• Portable design allows for on-the-go external
storage
• Supports USB 3.0 data transfer rates up to 5 Gbps;
backwards compatible with USB 2.0 and 1.1
• Compatible with SATA I (1.5 Gbps), II (3 Gbps), and
III (6 Gbps) hard drives
• Tested with 2.5-inch SATA hard disk drives and solid
state drives up to 2 TB
• UASP-compatible for up to 70% faster performance
• Plug-and-play; no software or drivers required
• No external power required
16-11-238-933690.indb 2 12/20/2016 4:20:37 PM
3
System Requirements
Optional Accessories
• 2.5” SATA Hard Drive
• Computer with an available USB port. A USB 3.0
port is required to achieve maximum speeds.
• 2.5” SATA HDD or SSD with 9.5 mm maximum
height
• Compatible with all USB-enabled operating systems
• U324-Series USB 3.0 SuperSpeed Extension Cable
A/A (M/F)
• U326-Series USB 3.0 SuperSpeed Device Cable
A/Micro-B (M/M)
16-11-238-933690.indb 3 12/20/2016 4:20:37 PM
4
Installation
Notes:
• Once the password is set and data is encrypted, losing
the password or hardware failure will result in lost data.
Removing the drive and placing it in another enclosure will
not allow access to the data. It is recommended that all data
stored on the enclosure be backed up to another location
regularly to prevent data loss.
• HDD/SSD drives are sensitive to static electricity and must be
handled properly to avoid the risk of data loss. Always handle
your HDD/SSD drive with caution by wearing an anti-static
strap (such as Tripp Lite P999-000) or touching a grounded
metal surface to discharge yourself of static electricity prior to
picking up the drive.
1. Slide off the enclosure cover to reveal the drive
tray.
2. Slide a 2.5” SATA drive into the drive tray. Align the
SATA plug on the drive to the SATA connector in
the drive tray.
3. Slide the enclosure cover back on the unit. Flip the
unit over so its keypad faces upward.
4. Press and hold the “1” and “3” buttons on the
keypad for 20 seconds. At the same time, connect
the included USB cable between the USB port on
the unit and a USB port on the host computer. The
green LED will blink for a moment, then the red
and green LEDs will illuminate solid to indicate the
unit is ready to be assigned a password.
16-11-238-933690.indb 4 12/20/2016 4:20:37 PM
5
Installation
5. To assign a password, press and hold the “*”
button for 5 seconds or until the orange LED
illuminates. Enter your 4 to 6-digit custom
password, then hit the “#” button to enter.
6. Once the custom password is entered, the orange
LED will shut off, though the password must be
reentered for confirmation. If your password is
successfully confirmed, the green and blue LEDs
will illuminate. If your password confirmation
is unsuccessful, the red and green LEDs will
illuminate to indicate the passwords do not match.
7. After your password is successfully confirmed, the
host computer will immediately identify the hard
drive connected to the keypad.
8. If the SATA drive has not been formatted, you will
first need to format it using your computer’s Disk
Management Utility in order to copy and access
files.
9. Your enclosure is now ready to read and write data.
The green LED will blink to indicate data is being
transferred.
16-11-238-933690.indb 5 12/20/2016 4:20:37 PM
6
Modifying Your Password
To change your password, follow these steps:
1. Press and hold the “*” button. At the same time,
connect the included USB cable between the
USB port on the unit and a USB port on the host
computer. After approximately 5 seconds, the red,
green and orange LEDs will illuminate.
2. Enter the old password and press the “#”
button to enter. Only the red and green LEDs will
illuminate.
3. Enter the new password and press the “#” button
to save. The blue LED will blink while the red and
green LEDs remain illuminated.
4. Reenter the new password and press the “#”
button to confirm the password change was
successful. The blue LED will blink. The red and
green LEDs will then illuminate to indicate a
successful password change.
16-11-238-933690.indb 6 12/20/2016 4:20:37 PM
7
Specifications
SATA Connection 22-Pin SATA Data + Power
USB Connection USB 3.0 Micro B (Female)
Encryption 256-bit AES
LEDs Lock (Red),
Power/Data (Green),
Setup (Orange),
Unlock (Blue)
Hard Drive Capacity Tested up to 2 TB
Operating Temperature 50° to 122°F (10° to 50°C)
Operating Humidity 10% to 80% RH
16-11-238-933690.indb 7 12/20/2016 4:20:37 PM
8
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects
in materials and workmanship for a period of one (1) year
from the date of initial purchase. TRIPP LITE’s obligation
under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized
TRIPP LITE service center. Products must be returned to
TRIPP LITE or an authorized TRIPP LITE service center with
transportation charges prepaid and must be accompanied by
a brief description of the problem encountered and proof of
date and place of purchase. This warranty does not apply to
equipment, which has been damaged by accident, negligence
or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s)
may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE
BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss
of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.
16-11-238-933690.indb 8 12/20/2016 4:20:37 PM
9
Warranty and Product Registration
Product Registration
Visit www.tripplite.com/warranty today to register your new
Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some
restrictions apply. See website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
16-11-238-933690.indb 9 12/20/2016 4:20:37 PM
10
Warranty and Product Registration
Any changes or modifications to this equipment not expressly
approved by Tripp Lite could void the user’s authority to operate
this equipment.
WEEE Compliance Information for Tripp Lite Customers
and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment
(WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one,
like-for-like basis (this varies depending on the
country)
• Send the new equipment back for recycling when
this ultimately becomes waste
Use of this equipment in life support applications where failure
of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its
safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
16-11-238-933690.indb 10 12/20/2016 4:20:37 PM
Indice
Lingue:
Altri manuali Tripp Lite Allegato
Tripp Lite
Tripp Lite SmartRack SRW12U13 Manuale utente
Tripp Lite
Tripp Lite U457-1M2-NVMEG2 Manuale utente
Tripp Lite
Tripp Lite SmartRack SRW12UHD Manuale utente
Tripp Lite
Tripp Lite SmartRack SRW10US Manuale utente
Tripp Lite
Tripp Lite SmartRack SRW9UDPVRT Manuale utente
Tripp Lite
Tripp Lite SmartRack SRW10US Manuale di installazione e funzionamento
Tripp Lite
Tripp Lite SmartRack SR42UBSP1 Manuale utente
Tripp Lite
Tripp Lite SmartRack Manuale utente
Tripp Lite
Tripp Lite 3-Breaker Parallel Tie Cabinet (for SU20KX 3-Phase UPS)... Manuale utente
Tripp Lite
Tripp Lite U457-025-SATAG2 Manuale utente
Tripp Lite
Tripp Lite SmartRack SRWF5U Manuale utente
Tripp Lite
Tripp Lite SmartRack SRW12US Manuale utente
Tripp Lite
Tripp Lite SmartRack SR42UBZ4 Manuale utente
Tripp Lite
Tripp Lite SR42UWEXP Guida all'installazione
Tripp Lite
Tripp Lite SmartRack SR25UB Manuale utente
Tripp Lite
Tripp Lite SRFANROOF Manuale utente
Tripp Lite
Tripp Lite EN1309N4 Manuale utente
Tripp Lite
Tripp Lite SmartRack SRWF5U36 Manuale utente
Tripp Lite
Tripp Lite U457-025-G1-WPG Manuale utente
Tripp Lite
Tripp Lite SmartRack SRWF2U Manuale utente
