TSC TTP-244 series Manuale utente

TTP-244 / TTP-244 Plus

THERMAL TRANSFER / DIRECT THERMAL BAR

CODE PRINTER

USER’S

MANUAL

CONTENTS

1. PRODUCT INTRODUCTION..........................................................2

1.1 Compliances..................................................................................................... 2

2. GETTING STARTED ......................................................................3

2.1 Unpacking and Inspection............................................................................ 3

2.2 Equipment Checklist..................................................................................... 3

2.3 Printer Parts ................................................................................................. 4

2.4 External Label Roll Mount (Option) .............................................................. 7

2.5 Buttons and Indicators.................................................................................. 8

3. SET UP ...........................................................................................9

3.1 Setting Up the Printer................................................................................... 9

3.2 Loading Label and Tag Stock....................................................................... 9

3.3 Ribbon Loading Instructions....................................................................... 12

3.4 Install External Label Roll Mount (Option).................................................. 16

3.5 Self Test..................................................................................................... 17

3.6 Dump Mode................................................................................................ 18

3.7 Install SD Memory Card (TTP-244 Plus Model only / Option).................... 19

4. USING PRINTER..........................................................................21

4.1 Power-on Utilities ....................................................................................... 21

4.1.1 Self Test Utility ....................................................................................... 21

4.1.2 Gap Sensor Calibration Utility ................................................................ 21

4.1.3 Printer Initialization................................................................................. 22

4.2 Troubleshooting Guide............................................................................... 23

1. PRODUCT INTRODUCTION

Thank you very much for purchasing TSC bar code printer. The attractive

desktop printer delivers superior performance at an economical price. Both

powerful and easy-to-use, this printer is your best choice among desktop direct

thermal and thermal transfer label printers.

This printer offers both thermal transfer and direct thermal printing, 32-bit RISC

multi-tasking processor, print speed up to 4.0 inches per second features. It can

accept a wide range of media, including continuous, die-cut, and fan-fold labels

or tags for both thermal transfer and direct thermal printing. All of the most

frequently used bar code formats are available. Fonts and bar codes can be

printed in any one of four directions. And it provides a choice of eight different

sizes of alphanumeric fonts. By using font multiplication, an even greater range of

sizes is possible. Smooth fonts can be downloaded from the software. In addition,

It is capable of independently executing BASIC programming functions, including

arithmetic, logical operation, loop, flow-control and file management, among

others. This programming capability provides the greatest efficiency in label

printing. The status of printer and error messages may either be printed out or

viewed on a monitor by means of the connection.

1.1 Compliances

CE Class A, FCC Class A, TÜV

WARNING

1. HAZARDOUS MOVING PARTS IN CUTTER MODULE. KEEP FINGER AND OTHER

BODY PARTS AWAY.

2. THE MAIN BOARD INCLUDES REAL TIME CLOCK FEATURE HAS LITHIUM

BATTERY CR2032 INSTALLED. RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

3. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

2. GETTING STARTED

2.1 Unpacking and Inspection

The printer has been specially packaged to withstand damage in the shipping

process. However, for fear that unexpected damage might occur, upon receiving

the bar code printer, carefully inspect the package and the device. In case of

evident damage, contact the carrier directly to specify the nature and extent of

the damage. Please retain the packaging materials in case you need to reship

the printer.

2.2 Equipment Checklist

* One bar code printer unit

* One Windows labeling software/Driver CD disk

* One quick start guide

* One external auto switching power supply

* One power cord

* One label spindle

* Two fixing tabs

* Two ribbon spindles

* One paper core for ribbon rewind spindle

If any parts are missing, please contact the Customer Service Department of

your purchased reseller or distributor.

2.3 Printer Parts

1. Cover Release Button

2. PWR., ON-LINE and ERR. Indicators

3. PAUSE Button

4. FEED Button

5. Label Dispense Opening

1. Printer Cover (in open position)

2. Label Supply Roll Spindle

3. Fixing Tabs

4. Ribbon Mechanism

5. Ribbon Supply Spindle

6. Ribbon Rewind Spindle

7. Printer Carriage Release Lever

8. Detachable Front Panel

9. PAUSE Button

10. PWR., ON-LINE, ERR. Indicators

11. FEED Button

3 5

1. Power On/Off Switch

2. Power Supply DC Jacket

3. RS-232C Interface Connector

4. USB Interface Connector

5. Label Insert Opening (For use with external media)

6. Centronics Interface Connector (Factory option)

2.4 External Label Roll Mount (Option)

2.5 Buttons and Indicators

PWR. (POWER) Indicator

The green PWR. indicator illuminates when the POWER switch is turned on.

ON-LINE Indicator

The green ON-LINE indicator illuminates when the printer is ready to print. When

PAUSE button is pressed, the ON-LINE indicator flashes.

ERR. Indicator (Error/Paper Empty)

The red ERR. indicator illuminates in the event of a printer error, such as memory

error, syntax error, and so forth. For a full list of error messages, please refer to

section 4.2, Troubleshooting Guides.

PAUSE Button

The PAUSE button allows the user to stop a print job and then continue the

printing with a second depression of the button. By pressing the PAUSE button:

(1) the printer stops printing after the printing label, (2) the PAUSE LED flashes,

and (3) the printer will hold all data in memory. This allows for trouble-free

replacement of label stock and thermal transfer ribbon. A second depression of

the PAUSE button will restart the printer.

Note: If the PAUSE button is held down for more than 3 seconds, the

printer will be reset and all data of the previous printing job will be

lost.

FEED Button

Press the FEED button to feed the label to the beginning of the next label.

Altri manuali per TTP-244 series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TSC Lettore di codici a barre

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente