TYAN THUNDER K8SE Manuale utente

http://www.tyan.com

Thunder K8SE /// S2892

Version 1.02

part of this manual may be reproduced or translated without prior written

consent from TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Taro and Thunder K8SE are trademarks of TYAN Computer Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.

Nvidia and nForce are trademarks of Nvidia Corporation

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE,is a trademark of SuSE AG.

Linux is a trademark of Linus Torvalds

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

Table of Contents

Chapter 1: Introduction

1.1 Congratulations Page 3

1.2 Hardware Specifications Page 3

1.3 Software Specifications Page 5

Chapter 2: Board Installation

2.1 Board Image Page 7

2.2 Block Diagram Page 9

2.3 Board Parts, Jumpers and Connectors Page 10

2.4 Installing the Processor(s) Page 20

2.5 Heatsink Retention Frame Installation Page 21

2.6 Thermal Interface Material Page 22

2.7 Heatsink Installation Procedures Page 23

2.8 Tips on Installing Motherboard in Chassis Page 25

2.9 Installing the Memory Page 26

2.10 Attaching Drive Cables Page 29

2.11 Installing Add-In Cards Page 31

2.12 Connecting External Devices Page 32

2.13 Installing the Power Supply Page 33

2.15 Finishing Up Page 34

Chapter 3: BIOS

3.1 BIOS Setup Utility Page 35

3.2 BIOS Menu Bar Page 36

3.3 BIOS Legend Bar Page 36

3.4 Getting Help Page 36

3.5 BIOS Main Menu Page 37

3.6 BIOS Advanced Menu Page 38

3.7 BIOS Memory Menu Page 55

3.8 Security Menu Page 57

3.9 BIOS Boot Menu Page 58

3.10 Power Menu Page 60

3.9 BIOS Exit Menu Page 61

Chapter 4: Diagnostics

4.1 Beep Codes Page 63

4.2 Flash Utility Page 63

4.3 BIOS Post Code Page 64

Glossary Page 67

Technical Support Page 73

http://www.tyan.com

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server/work station solutions.

The Thunder K8SE (S2892) is a high-end server/work station mainboard, based

on Nvidia nForce pro2200, Winbond W83627HF Super I/O, Analog Devices,

ADT7463 Hardware Monitoring and AMD-8131TM PCI-X Tunnel chipsets.

Designed to support up to two AMD Opteron™ (200 series) processors and

16GB of DDR400/333 memory, the S2892 is ideal for CPU, memory, and

network intensive applications required in the HPC and clustering applications.

Remember to visit TYAN’s Website at http://www.tyan.com. There you can find

information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processors

•Two uPGA 940-pin ZIF sockets

•Supports one or two AMD

OpteronTM processors

•Integrated 128-bit Dual Channel

DDR memory controller

Chipset

•Nvidia nForce pro2200

•AMD 8131™ PCI-X Tunnel

•Winbond W83627HF Super I/O

•Analog Devices ADT7463

Hardware Monitoring IC

Memory

•128-bit dual channel memory bus

•Total Eight 184-pin 2.6-volt DDR

DIMM sockets (four per CPU)

•Supports up to 16GB Registered

DDR

•Supports ECC type memory

modules

•Supports DDR400, DDR333

Integrated SATAII Controllers

•Two integrated dual port SATA II

controllers

•Four SATA connectors support up

to four drives

•Support up to 3Gb/s

Integrated LAN Controllers

•One BroadcomBCM5704 Dual

Port GbE controller

- Two RJ-45 LAN connectors with

LEDs

- Connected to PCI-X Bridge B

- Two front panel LED headers

•One Intel82551QM 10/100 Mbps

Ethernet controller

- One RJ-45 LAN connector with

LEDs stacked on rear two-USB2.0

ports

- Connected to 32bit/33MHz PCI

2.3 bus

- One front panel LED header

http://www.tyan.com

Expansion Slots

•One x16 PCI Express expansion

slot, which can split to two x8

slots through riser card

•One PCI 2.3 compliant 5V tolerant

32bit/33MHz slot

•One x16 PCI Express slot with x4

signals

•Two independent 64-bit PCI-X

buses

- Two 133/100/66 MHz PCI-X slots

from Bridge A

- One 100/66 MHz PCI-X slot from

Bridge B

- One 100/66 MHz max Tyan

TARO SODIMM from Bridge B

Integrated I/O

•One floppy connector

•One parallel port header and two

serial (one connector, one

header)

•Four USB2.0 ports (two rear

connectors & two front panel

headers)

•One 15-pin VGA connector

•PS/2 mouse and keyboard

connectors

System Management

•Total 7 fan headers with

monitoring

- Four 3-pin fan headers

- Three 4-pin fan headers

•One 2-pin chassis intrusion

header

•Temperature, voltage and fan

monitoring

Integrated Enhanced IDE

Controller

•Two IDE dual-drive ports for up to

four EIDE devices

•Supports for UDMA

133/100/66/33 IDE drives and

ATAPI devices

BIOS

•Phoenix BIOS on 8Mbit LPC

Flash ROM

•PXE via Ethernet, USB device

boot

•SMBIOS 2.3.1, BBS 1.1 compliant

•Headless operation via serial

console redirect

•48-bit LBA support

Intelligent Platform

Management Interface Header

•Tyan Server Management

Daughter card (optional)

supports features listed below

via SMDC header

- Baseboard Management

Controller (BMC)

- Tailored for IPMI

- Supports KCS and BT styles

- Flexible Windows or Linux

management solution

- Supports RMCP and SNMP

protocols

- Supports ASF standard and EMP

- 12C serial multi-master controllers

and UARTs

- Built-in IPMB connector

- Remote power on/off and reset

support (IPMI-over-LAN)

Regulatory

•FCC Class B (DoC)

•European Community CE (DoC)

Integrated Video Controller

•ATI® RAGE XLTM PCI controller w/

8MB memory

http://www.tyan.com

Form Factor

•SSI EEB v3.0 Footprint (12” x 13”,

304.8 x 330.2mm) fits most

Rackmount E-ATX chassis

•EPS 12V/SSI (24 + 8 pin) power

connectors

•Serial (one) and VGA (one)

connectors

•Stacked USB 2.0 (two) with one

RJ45 connectors

•Stacked PS/2 keyboard and

mouse connectors

•Two RJ-45 LAN connectors with

LEDs

1.3 - Software Specifications

OS (Operating System) Support

Microsoft Windows 2000

Microsoft Windows XP

Microsoft Windows Server 2003

SUSE Professional 9.x and SLES 9

RHEL3 Update 4

TYAN reserves the right to add support or discontinue support for any OS with

or without notice.

http://www.tyan.com

NOTES:

http://www.tyan.com

Chapter 2: Board Installation

Precautions: The Thunder K8SE supports SSI, EPS12V type power supplies

(24pin + 8pin) and will not operate with any other types. For proper power

supply installation procedures see page 34.

DO NOT USE ATX 2.x or ATXGES power supplies as they will damage the

board and void your warranty.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED

http://www.tyan.com

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

The following page includes details on the vital components of this

motherboard.

http://www.tyan.com

2.2 - Block Diagram

Thunder K8SE (S2892) Block Diagram

http://www.tyan.com

2.3 - Board Parts, Jumpers and Connectors

CPU 2

CPU 1

DIMM A1

DIMM A2

DIMM B1

DIMM B2

DIMM A1DIMM A1

DIMM B2

DIMMB1

DIMM A2

DIMM A1

DIMM B2

X16 PCI Express

PCI 32

X4 PCI Express

X16 PCI Express

100/66 PCI-X

133/100 PCI-X133/100 PCI-X

133/100 PCI-X

FDD1

J24

LPT1

J42

J37

J38

J39

J43 J41

J36

J49

J48

J47

J44

IDE1

IDE2

BIOS

Win bond

M83627HF-AW

J50

J53J51/ 52J

J46

DIMM B2

P1W

PW2

J11

J10

RAGE XL

215R 3LASB41

J26

J35

Nvidia

Crush K8-04

AMD

8131 PCI-X

J25

J15

J16

J25

J56

J1P

J57

J58

J45

J14

U10

R3T

R1T

R2T

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

 OPEN - Jumper OFF, without jumper cover

 CLOSED – Jumper ON, with jumper cover

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TYAN Scheda madre

TYAN

TYAN TRINITY GC-SL Manuale utente

TYAN

TYAN Tiger MPX S2466 Manuale utente

TYAN

TYAN S7055 Manuale utente

TYAN

TYAN TRINITY I845 Manuale utente

TYAN

TYAN Tempest i5400XL Manuale utente

TYAN

TYAN S8253 Manuale utente

TYAN

TYAN S2505T Istruzioni per l'installazione e il funzionamento

TYAN

TYAN Tempest i5100X S5375 Manuale utente

TYAN

TYAN Thunder K8W S2885 Manuale utente

TYAN

TYAN Toledo i965R (S5180AG2N) Manuale utente

TYAN

TYAN Toledo i3210W Manuale utente

TYAN

TYAN S8032 Manuale utente

TYAN

TYAN TOMCAT I845 Manuale utente

TYAN

TYAN TRINITY 371 Manuale utente

TYAN

TYAN S7100 Manuale utente

TYAN

TYAN THUNDER K8WE Manuale utente

TYAN

TYAN S7082 Manuale utente

TYAN

TYAN TOMCAT I7210 Manuale utente

TYAN

TYAN S5556 Manuale utente

TYAN

TYAN S8228 Manuale operativo e di manutenzione

TYAN

TYAN THUNDER I840 Manuale utente

TYAN

TYAN Tomcat i945GM S3095 Manuale utente

TYAN

TYAN S7020 Manuale utente

TYAN

TYAN THUNDER K8HR Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente