Ubiquiti ES-48-500W Manuale utente

EdgeSwitch Mounting Screws (Qty. 4) Cage Nuts (Qty. 4)

Power Cord

Package Contents

Installation Requirements

Phillips screwdriver

Standard-sized, 19" wide rack with a minimum of 1U height available

For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through the AC ground of the power

supply.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit:

ui.com/toughcable

Note:

Although the cabling can be located outdoors, the EdgeSwitch itself should

be housed inside a protective enclosure.

Hardware Overview

ES-48-500W, ES-48-750W Quick Start Guide

System LED

RJ45 PoE LED (Ports 1 - 48)

RJ45 Speed/Link/Activity LED (Ports 1 - 48)

Note:

The System LED functionality has been updated with rmware v1.8.0. We

recommend that you update the EdgeSwitch to the latest rmware.

Flashing White Bootup in progress.

White Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™). See

“UNMS

Management”

Blue Ready for use, connected to UNMS.

Steady Blue with Occasional

Flashing Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Oﬀ No PoE

Amber IEEE 802.3af/802.3at

Green 24V Passive

Oﬀ No Link

Amber Link Established at 10/100 Mbps

ES-48-500W, ES-48-750W Quick Start Guide

SFP+ Speed/Link/Activity LED (Ports 1 - 2)

SFP Speed/Link/Activity LED (Ports 1 - 2)

RJ45 (Ports 1 - 48)

SFP+ (Ports 1 - 2)

SFP (Ports 1 - 2)

Reset Button

Console Port

Power Port

Flashing Indicates Activity

Green Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

Oﬀ No Link

Green Link Established at 1 Gbps

Flashing Indicates Activity

White Link Established at 10 Gbps

Flashing Indicates Activity

Oﬀ No Link

Green Link Established at 1 Gbps

Flashing Indicates Activity

RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet connections.

Hot-swappable SFP+ ports support 1/10 Gbps connections.

Hot-swappable SFP ports support 1 Gbps connections.

Click here

to learn how to reset an EdgeSwitch to factory defaults.

RJ45 serial console port for Command Line Interface (CLI) management.

Connect the included Power Cord to the Power port.

Hardware Installation

ES-48-500W, ES-48-750W Quick Start Guide



ES-48-500W, ES-48-750W Quick Start Guide

Connecting Ethernet

ES-48-500W, ES-48-750W Quick Start Guide

Note:

The PoE settings for ports 1-48 are set to PoE+ auto by default, so 802.3af/at

devices can be plugged in and automatically receive PoE. For instructions on how to

enable 24V passive PoE, refer to

“Conguring PoE Settings”

Connecting SFP+/SFP

These ports support the specied module types at the following speeds:

Ports SFP+ Module Type SFP Module Type

SFP+ 1-2 10 Gbps 1 Gbps

SFP 1-2 (Not supported) 1 Gbps

ES-48-500W, ES-48-750W Quick Start Guide

For information about compatible ber SFP+ or SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

Accessing the Conguration Interface

The EdgeSwitch is set to DHCP by default, so it will try to automatically obtain an IP address. If

that fails, then it will use the default fallback IP address, 192.168.1.2. Proceed to the

appropriate section, DHCP or

“Fallback IP Address”

DHCP

Use one of the following methods:

Set up the DHCP server to provide a specic IP address to the EdgeSwitch based on its

MAC address (on the label).

Let the EdgeSwitch obtain an IP address and then check the DHCP server to see which IP

address was assigned.

ES-48-500W, ES-48-750W Quick Start Guide

To log in, follow these steps:

1. Launch your web browser. Type the appropriate IP address in the address eld. Press enter

(PC) or return (Mac).

2. Enter ubnt in the Username and Password elds. Click Sign In.

3. The EdgeSwitch Conguration Interface will appear. Customize additional settings as

needed.

For more information on PoE conguration, refer to

“Conguring PoE Settings”

. For more

information, refer to the EdgeSwitch documentation, which is available at

ui.com/download/edgemax

Fallback IP Address

1. Ensure that your computer (or other host machine) is connected to the EdgeSwitch.

2. Congure the Ethernet adapter on your host system with a static IP address on the

192.168.1.x subnet.

3. Launch your web browser. Type the appropriate IP address in the address eld (192.168.1.2

is the default fallback IP address). Press enter (PC) or return (Mac).

ES-48-500W, ES-48-750W Quick Start Guide

4. Enter ubnt in the Username and Password elds. Click Sign In.

5. The EdgeSwitch Conguration Interface will appear. Go to Settings .

6. Change the IP Address to a unique IP address. Click Apply.

ES-48-500W, ES-48-750W Quick Start Guide

Note:

If you change the IP settings, then the session will be cut oﬀ, and you will need

to reconnect to the EdgeSwitch using the new IP address.

Customize additional settings as needed. For more information on PoE conguration, refer to

“Conguring PoE Settings”

UNMS Management

You can manage your device using UNMS, which lets you congure, monitor, upgrade, and

back up your devices using a single application. Get started at

www.unms.com

Conguring PoE Settings

The PoE settings for ports 1-48 are set to PoE+ by default, so 802.3af/at devices can be

plugged in and automatically receive PoE.

WARNING:

Before activating 24V passive PoE, ensure that the connected device

supports PoE and the supplied voltage.

1. Go to Dashboard .

2. For the Ethernet port you want to congure, click the PoE drop-down menu.

ES-48-500W, ES-48-750W Quick Start Guide

Altri manuali per ES-48-500W

Questo manuale è adatto per i seguenti modelli

Altri manuali Ubiquiti Interruttore

Ubiquiti

Ubiquiti TouchSwitch Poe TS-5-POE Manuale utente

Ubiquiti

Ubiquiti ES-48-500W Manuale utente

Ubiquiti

Ubiquiti unifi switch 8 Manuale utente

Ubiquiti

Ubiquiti UniFi US-48-500W Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch ES-10XP Guida

Ubiquiti

Ubiquiti UniFi USW-16-POE Manuale utente

Ubiquiti

Ubiquiti UniFi SWITCH 48 Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch 10 XP Manuale utente

Ubiquiti

Ubiquiti UniFi USW-Industral Guida

Ubiquiti

Ubiquiti mFi-LD Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch 48 Manuale utente

Ubiquiti

Ubiquiti ES-24-250W Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch ES-16-XG Manuale utente

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Manuale utente

Ubiquiti

Ubiquiti EdgeSwitch ES-16-XG Manuale utente

Ubiquiti

Ubiquiti 0810354023262 Manuale utente

Ubiquiti

Ubiquiti 0817882025218 Manuale utente

Ubiquiti

Ubiquiti UniFi USW-Pro-48-POE Manuale utente

Ubiquiti

Ubiquiti UniFi USW-24-POE Manuale utente

Ubiquiti

Ubiquiti USW-48-POE Manuale utente

Ubiquiti

Ubiquiti unifi switch 8 Manuale utente

Ubiquiti

Ubiquiti POE-50-60W Manuale utente

Ubiquiti

Ubiquiti US-48 Manuale utente

Ubiquiti

Ubiquiti ES-48-500W Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente