Unitech MS920 Manuale utente

Wireless Pocket 2D Imager Scanner

- MS920 -

User's

Manual

Version 3

Table ofContents

Chapter 1

Overview............................................................................................................

Package

Contents..................................................................................................

Scanner Detail

.......................................................................................................

Getting

Start

...........................................................................................................

Battery Charging

....................................................................................................

Specification

...........................................................................................................

Chapter 2

Bluetooth Function Setting

................................................................................

Pairing With PC/Notebook For The First

ime

.......................................................

Buffer Mode

............................................................................................................

Switching Between HID and SPP Mode

................................................................

Factory Default

.......................................................................................................

Display F/W

ersion

...............................................................................................

BT Un-pair

..............................................................................................................

iOS Keypad

............................................................................................................

Batch Send

.............................................................................................................

Batch Space

Left....................................................................................................

Beep on Good Read (Toggle)

................................................................................

Beep on Connection Charge (

oggle)

....................................................................

Erasing the Buffer

..................................................................................................

MCU Power Saving

..............................................................................................

HID Keyborad Character

Delay............................................................................

HID Keyborad Block Delay

...................................................................................

HID Keyborad Case

.............................................................................................

HID Keyborad Languages

....................................................................................

Enter BT Pairing Code

.........................................................................................

Chapter 3

Symbologies

....................................................................................................

Disable all symbologies

........................................................................................

Codabar

...............................................................................................................

Codablock

............................................................................................................

Code 11

................................................................................................................

Code 39

................................................................................................................

Code 93/ Code 93i

...............................................................................................

Code 128 / GS1-128

............................................................................................

DataMatrix

............................................................................................................

EAN / UPC

...........................................................................................................

GS1 DataBar (RSS)

.............................................................................................

Interleaved 2 of 5

.................................................................................................

Matrix 2 of 5

.........................................................................................................

MaxCode

..............................................................................................................

MicroPDF417

.......................................................................................................

MSI Code

.............................................................................................................

PDF 417

...............................................................................................................

Plessey Code

.......................................................................................................

QR Code

..............................................................................................................

Standard 2 of 5

....................................................................................................

elepen

.................................................................................................................

Chapter 4

Operating

Settings...........................................................................................

Pre-defined trigger modes

...................................................................................

Scanning /

Triggering ...........................................................................................

Data decoding security

........................................................................................

Beeps / LEDs

.......................................................................................................

Chapter 5

Data Transmission

Settings.............................................................................

Symbology identifier

...........................................................................................

Preamble

............................................................................................................

Postamble

..........................................................................................................

Inter-Character / message delay

........................................................................

Data editing

........................................................................................................

Appendix I

Worldwide Support .........................................................................................103

unitech is a registered trademark of unitech Electronics Co., Ltd.

About This Manual

Preface

Thank you for purchasing the unitech product.

This manual explains how to install, operate and maintain our product.

No part of this publication may be reproduced or used in any form, or by any

electrical or mechanical means, such as photocopying, recording, or

information storage and retrieval systems, without permission in writing from

the manufacturer. The material in this manual is subject to change without

notice.

Regulatory Compliance Statements

FCC Warning Statement

This device has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference with radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference with radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

unitech is a registered trademark of unitech Electronics Co., Ltd.

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

1. This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

2. This device complies with FCC RF radiation exposure limits set forth for

an uncontrolled environment. To maintain compliance with FCC RF

exposure requirements, avoid direct contact to the transmitting antenna

during transmitting.

3. Any changes or modifications (including the antennas) made to this device

that are not expressly approved by the manufacturer may void the user’s

authority to operate the equipment.

Operation on the 5.15 - 5.25GHz frequency band is restricted to indoor use

only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the

potential for harmful interference to co-channel Mobile Satellite Systems.

Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and

5.725–5.850 GHz band when associated with an access point (AP).

FCC Label Statement

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

RF Radiation Exposure Statement

For body contact during operation, this device has been tested and meets FCC

RF exposure guidelines when used with an accessory that contains no metal

and that positions the handset a minimum of 0.5 cm from the body.

Use of other accessories may not ensure compliance with FCC RF exposure

guidelines.

iii

unitech is a registered trademark of unitech Electronics Co., Ltd.

Canadian Compliance Statement

This Class B Digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numerique de la classe B respecte les exigences du Reglement

sur le material broilleur du Canada.

European Conformity Statement

unitech Electronics co., Ltd herewith declares that the unitech product is in

compliance with the essential requirements and all other provisions of the RED

2014/53/EU directive, the EMC 2014/30/EU directive and the Low Voltage

2014/35/EU directive.

The declaration of conformity is available for download at :

https://portal.unitech.eu/public/Safetyregulatorystatement

CE RF Exposure Compliance

This device meets EU requirements (2014/53/EC) on the limitation of

exposure of the general public to electromagnetic fields by way of health

protection.

For body-worn operation, this device has been tested and meets the ICNIRP

guidelines and the European Standard EN 62209-2, for use with dedicated

accessories, SAR is measured with this device at a separation of 0.5 cm to the

body, while transmitting at the highest certified output power level in all

frequency bands of this device. Use of other accessories which contain metals

may not ensure compliance with ICNIRP exposure guidelines.

CE Mark Warning

This equipment complies with the requirements of Directive 2014/53/EC of the

European Parliament and Commission from 24 May, 2014 governing Radio

and Telecommunications Equipment and mutual recognition of conformity.

unitech is a registered trademark of unitech Electronics Co., Ltd.

RoHS Statement

This device conforms to RoHS (Restriction Of

Hazardous Substances) European Union regulations

that set maximum concentration limits on hazardous

materials used in electrical and electronic equipment.

Waste electrical and electronic equipment (WEEE)

unitech has set up a policy and process to meet the EU

directive 2002/96/EC and update 2003/108/EC

concerning electronic waste disposal.

For more detailed information of the electronic waste

disposal of the products you have purchased from

unitech directly or via unitech’s resellers, you shall either

contact your local supplier or visit us at :

https://portal.unitech.eu/public/WEEE

unitech is a registered trademark of unitech Electronics Co., Ltd.

Taiwan NCC Warning Statement

低功率電波輻射性電機管理辦法

第十二條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者

均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有

干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備

之干擾。

注意事項:

1. 使用過度恐傷害視力。

2. 使用30分鐘請休息10分鐘；2歲以下幼兒不看螢幕，2歲以上每天看螢幕不要超過

1小時。

3. 減少電磁波影響，請妥適使用。

SAR 標準值 2.0W/Kg，送測產品實測值為 0.217 W/kg@10g

unitech is a registered trademark of unitech Electronics Co., Ltd.

Laser Information

The unitech product is certified in the U.S. to conform to the requirements of

DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1.

Class II and Class 2 products are not considered to be hazardous. The unitech

product contains internally a Visible Laser Diode (VLD) whose emissions do

not exceed the maximum limits as set forth in the above regulations. The

scanner is designed so that there is no human access to harmful laser light

during normal operation, user maintenance or prescribed service operations.

The laser safety warning label required by the DHHS/IEC for the unitech

product’s optional laser scanner module is located on the memory

compartment cover, on the back of the unit.

* Laser information only applies to the products with laser components.

CAUTION! Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous laser

light. Use of optical instruments with the scanner, including

binoculars, microscopes, and magnifying glasses, with will

increase eye damage. This does not include eyeglasses worn by

the user.

LED Information

The unitech product contains LED indicator(s) or LED ring whose luminance is

not harmful to human eyes during normal operation, user maintenance or

prescribed service operations.

*LED information only applies to the products with LED components.

Altri manuali per MS920

Indice

Altri manuali Unitech Lettore di codici a barre

Unitech

Unitech MS250 Manuale utente

Unitech

Unitech MS912+ Manuale utente

Unitech

Unitech MS925 Manuale utente

Unitech

Unitech MS210 Manuale utente

Unitech

Unitech MS282 Manuale utente

Unitech

Unitech ES910 Manuale utente

Unitech

Unitech MS852B Plus Manuale utente

Unitech

Unitech MS852Plus Auto Switching Manuale utente

Unitech

Unitech MS650 Manuale utente

Unitech

Unitech MS912BT Manuale utente

Unitech

Unitech MS852B Plus Manuale utente

Unitech

Unitech MS840P Manuale utente

Unitech

Unitech Hand Held Scanner Manuale utente

Unitech

Unitech HT630 Manuale utente

Unitech

Unitech MS910 Manuale utente

Unitech

Unitech MS120 Manuale utente

Unitech

Unitech MS084 Manuale utente

Unitech

Unitech MS338 Manuale utente

Unitech

Unitech MS84X-2 Manuale utente

Unitech

Unitech MS912 Manuale utente

Unitech

Unitech MS832 Manuale utente

Unitech

Unitech MS842RB Manuale utente

Unitech

Unitech MS100 Manuale utente

Unitech

Unitech HT660 Wireless edition Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente