Unitech HT650 Manuale utente

HT650

Quick Reference Guide

HT650 Package Contents

Please ensure the following contents are in the HT650 packaging. If anything is missing or

damaged, please contact your local account manager or Unitech, Inc.

HT650 Handheld Computer

Product CD

USB Communication / Charging Cable

Battery Pack (1100mAH)

Power Adaptor & Plugs

Wrist Strap

Stylus

HT650 Front View

HT650 Rear View

Keypad

The HT650's 21-key keypad features: numeric, alpha,

function, escape, enter, scan trigger and cursor keys.

[SCAN]

Scan Trigger - Use this key to activate the barcode

scanner.

[ENT]

Enter Key - Use this key to confirm data entry.

[FUNC]

Function Key - Use this key to access function keys

shown on the keypad in orange.

 Press the [FUNC] key once to activate this state,

followed by another key.

[ESC]

Escape Key - Use this key to cancel or abort a current operation.

[ALPHA]

Alpha Key - Use this key to access the secondary layer of characters.

 Press the [ALPHA] key once to lock the keypad into Alpha state.

 Press the [ALPHA] key a second time to return to the normal state.

Install the Battery

1. Pinch the battery latches together and lift the cover from the HT650.

2. Insert the battery, from bottom first, into the battery compartment. Press down on the

battery until it snaps into place.

3. Replace the battery cover and secure it into place by sliding the latches into locking

position.

Before using the HT650, ensure that the battery is fully charged. The initial charge requires

approximately sixteen hours. Subsequent charges are completed in less than four hours.

Note：When the battery is charging, the HT650 Power LED lights red.

When charging is complete, the LED will turn green.

Charging the HT650

The battery in the HT650 can be charged using the Charging Cable or the Single-Slot USB

Cradle.

 Charging the battery with the Charging Cable

1. Plug the Charging Cable into the I/O port at the bottom of the HT650.

2. Connect the Power Supply to the Charging Cable.

3. Insert the Power Supply's plug into an electrical outlet.

 Charging the battery pack with Single Dock

a) Do not leave the battery pack inside of the Handy Terminal.

1. Plug the Power Supply into the Power Jack on the back of the Single-Slot Cradle.

2. Insert the Power Supply's plug into an electrical outlet.

3. Slide the HT650 into the cradle. When inserted properly, the HT650 Power LED will

light red to signify charging status.

b) The Single-Slot Cradle features an additional slot for charging spare batteries.

1. Insert the battery, from bottom first, into the battery compartment.

2. Press down on the battery until the battery snaps into place.

Note：When the battery is charging, the HT650 Power LED lights red.

When charging is complete, the LED will turn green.

Note:

The HT650 includes a backup battery that temporarily provides power and retains data in the

absence of main battery power. The backup battery maintains its charge by drawing power

from the main battery.

Unitech recommends frequent connection of your HT650 to an external power source to

conserve main battery power and recharge the backup battery. Always store an unused HT650

with a fully charged main battery pack.

If the main battery and backup battery are depleted, the HT650 will revert to factory default

values.

P/N 400993G Ver.0.2

http://www.ute.com/

Altri manuali per HT650

Indice

Altri manuali Unitech Terminale touch

Unitech

Unitech Tashi MT380 Proximity Manuale utente

Unitech

Unitech TASHI MT38NOREADER01 Manuale utente

Unitech

Unitech HT680 Manuale utente

Unitech

Unitech Tashi MT680-AMWTAG Manuale utente

Unitech

Unitech Tashi Manuale utente

Unitech

Unitech Tashi MT380 Proximity Manuale utente

Unitech

Unitech WD200 Manuale utente

Unitech

Unitech HT330 Manuale utente

Unitech

Unitech TASHI MT180 Manuale utente

Unitech

Unitech MR350 MKII Guida rapida

Unitech

Unitech EA500 Manuale utente

Unitech

Unitech EA520 Manuale utente

Unitech

Unitech MR350 MKII Manuale utente

Unitech

Unitech MT380-A9WE0G Manuale utente

Unitech

Unitech PA768 Manuale utente

Unitech

Unitech PA966 Manuale utente

Unitech

Unitech WD200 Manuale utente

Unitech

Unitech EA300 Manuale utente

Unitech

Unitech PA400 Manuale utente

Unitech

Unitech PA970 Manuale utente

Unitech

Unitech MT380-A6WE0G Manuale utente

Unitech

Unitech HT650 Manuale utente

Unitech

Unitech WD200 Manuale utente

Unitech

Unitech TASHI MT180 Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente

Prestel

Prestel VCS-G2PRO Manuale utente