Universal Remote Control AVEX R6 - SPECS SHEET Manuale utente

Page 1

AVEX R6

Remote Control

Owner’s Manual

Congratulations!

Congratulations on purchasing Universal Remote

Control’s AVEX R6 Pre--Programmed and Learning

remote control. You now have the power to control

your entire home entertainment system with one easy--

to--use remote. The AVEX R6 can be used with

thousands of audio/video components because of

the extensive library of codes that have already been

programmed into the remote. So... get ready to sit

back, relax, and simplify your home entertainment

experience.

This Owner’s Manual is designed to assist you in

programming your AVEX R6 remote to work with

your components by guiding you through an easy

step-by-step process. Everything you need to know

about programming the AVEX R6 is contained in this

Manual.

Control, Inc.

This document is protected by the copyright laws of

the United States and internationally by the Berne

Convention. No part of this manual may be

reproduced in any form without the express written

consent of Universal Remote Control, Inc. Although

reasonable care has been taken to assure the

accuracy of the information herein contained,

Universal Remote Control, Inc. is not responsible for

operational, technical or editorial errors or omissions.

The specifications and information in this manual

may be subject to change without notice.

MacroPower and SimpleSound are trademarks of

Universal Remote Control, Inc. Entertainment Made

Simple is a registered trademark of Universal Remote

Control, Inc. All other brand or product names are

trademarks or registered trademarks of their

respective owners.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

Table of Contents

Getting Started - Overview

• Control up to 6 Components ……………………………4

• Component Buttons ………………………………………4

• Battery Installation …………………………………………4

• Low Battery Warning ……………………………………5

• Couch Mode ……………………………………………5

Keypad Layout & Button Functions ……………6

Programming AVEX R6 Using

Pre-Programmed Codes …………………………7

• Quick Set-Up Method ……………………………………7

• Three-Digit Code Entry Method……………………………8

• Auto-Search Method ……………………………………10

Programming AVEX R6 Using the Learning

Method ………………………………………………12

Special Advanced Features ……………………14

• Programming Automated Activities ……………………14

• MacroPower Total System On/Off………………………14

• Programming Multi-Commands to Macro

Buttons …………………………………………………16

• “My Favorites” – Favorite Channels ……………………17

• More Favorite Channels …………………………………18

• SimpleSound™ Total System Volume Control……………19

• Channel Control “Punch Through” ………………………21

• Transport Control “Punch Through” ……………………22

• OSD (On-Screen Display) Control “Punch Through”……23

• Input Switching Macros …………………………………24

Erasing Commands-Overview ………………25

• Erasing a Single Learned Command ……………………25

• Erasing All Learned Commands from

One Component ………………………………………26

• Erasing MacroPower & Other Macro Commands ……27

• Erasing SimpleSound & Other

“Punch Through” Commands …………………………28

• Factory Reset ……………………………………………29

Finding a Component’s Set-Up Code

Number ………………………………………………30

Pre-Programmed Code Tables …………………31

• CABLE/SAT ……………………………………………32

• TV ……………………………………………………33-34

• DVR/VCR ……………………………………………35-36

• DVD ……………………………………………………37

• AUDIO …………………………………………………38

• AUX ……………………………………………………39

FAQs ……………………………………………………40

Warranty ………………………………………………41

Specifications ………………………………………41

Page 4

Getting Started - Overview

Control up to 6 Components

The AVEX R6 remote control is designed to control up

to six different Audio/Video components and operate

virtually all brands of AUDIO, TV, DVD, VCR/DVR,

SAT/CABLE and AUX (Light, Music Server, etc.)

components.

Component Buttons

Once you have programmed the AVEX R6 for all of

your components, all you need to do is press a

component button and all the buttons on the AVEX

R6 will work with that component. For example,

when you press the TV component button, all the

buttons on your AVEX R6 will operate your TV. If you

press the DVD component button, all the buttons on

the AVEX R6 will operate your DVD.

Each time you press any of the buttons on the remote,

the LED light in the component button will light up to

indicate which component you are controlling.

TV BUTTON

Battery Installation

Press the tab and remove the cover of the battery

compartment located in the back of your remote.

Insert the two AAA batteries (included in the

package) making sure to match the positive (+) and

negative (-) symbols as shown in the diagram. Place

the cover back over the battery compartment.

INSERT BATTERIES

CORRECTLY

Page 5

Low Battery Warning

When the batteries are low and need to be replaced

the component LED will quickly blink three times

when you press the Power [ON] button.

Couch Mode

The AVEX R6 is designed to automatically turn itself

off if a button is pressed for more than 30 seconds.

This prevents battery power from being depleted

should the remote accidentally slip between the

couch cushions.

Page 6

Keypad Layout & Button Functions

POWER

Allows you to turn the

selected component

on and off.

SYSTEM OFF

Designed to send Power

On/Off commands for

up to six components with

one button press.

Used to select the

component you

want to operate

and signals remote

control activity.

Displays the

Program Guide

listings through

the Cable Set

Top Box.

Used for

programming

steps and on-

screen navigation

and highlighting.

Selects highlighted

screen options.

Controls Picture-

In-Picture actions.

PIP

CONTROLS

Perform standard

VCR and DVD

functions when in

VCR and DVD

mode, or VOD

(Video-On-

Demand) and DVR

(Digital Video

Recorder) functions

when in Cable

mode.

TRANSPORT

CONTROLS

Custom-

programmable

Favorite Channel

Buttons

FAVORITES

Raises or lowers the

sound volume.

VOLUME

Displays information

about the program

currently playing or

highlighted in the

Program Guide

through the Cable

Set Top Box.

INFO

Displays the

Applications Menu

through the Cable

Set Top Box.

Use to enter code

numbers for

programming

components and

to enter channel

numbers to tune in

channels. Also

used to make

numeric entries on

on-screen menus.

NUMBER

PAD

TV, CBL,

VCR, AUDIO,

DVD, AUX

GUIDE

CURSOR

NAVIGATION

PAD

SELECT

EXIT

Exits from

current screen

through the

Cable Set

Top Box.

INPUT

Selects the video

source from available

components.

LAST

Returns to the

previously tuned

channel through the

Cable Set Top Box.

MUTE

Silences the Audio.

Press to activate.

Press again to

restore sound to

the previous level.

Page 7

Programming AVEX R6 using

Pre-Programmed Codes

There are three different ways you can program your

AVEX R6 using the component brand codes that are

pre-programmed into the remote. One of these will

work for you!

• Quick Set-Up Method

• Three-Digit Code Entry Method

• Auto-Search Method

* * *

TRY THIS FIRST!

Quick Set-Up Method

STEP 1: Manually or using your old remote, turn on

the component you want to program—for example, to

program your TV, turn on your TV set.

STEP 2: Point the AVEX R6 toward the component

that you want to program (in this case the TV set) and

press and hold the component button (in this case the

TV button). While holding down the component

button, begin to press numeric keys, one number at a

time, starting from 1, continuing to 2, 3 ... 0 until

component (in this case the TV) turns off.

STEP 3: Release the component button to save the

code. The component LED light will blink three times

to confirm that the code has been stored.

Repeat the above three steps for other components.

COMPONENT

BUTTONS

NUMBER

PAD

Page 8

IFQUICK SET-UP DID NOT WORK, TRY THIS NEXT:

Three-Digit Code Set-Up Method

STEP 1: Find the 3-digit code numbers assigned to

your brand from the lists in the back of this manual. The

codes are listed by component category (i.e., TV,

VCR, DVD, etc.), then by brand name. For instance,

if you would like to locate a code for a Sony

television, first locate the TV category and then look

for the Sony brand.

STEP 2: Once you have located the 3-digit codes

for each of the components that you wish to operate

with your AVEX R6, write them ALL down on a piece

of paper. It’s important that you write down all the

codes listed for your brand because only one code is

going to work with your component.

STEP 3: Manually or using your old remote, turn on

the component you want to program—for example,

to program your TV turn on your TV set.

STEP 4: On the AVEX R6, press the Component

button that you want to program (in this case the

button that says TV) and the SELECT [SEL] button at

the same time. Hold down both buttons for 2

seconds until the TV Component LED light turns on.

This signals that you are in programming mode.

IMPORTANT: You have 30 seconds to perform the

next step while you are in programming mode. If you

do not press a button within 30 seconds,the

component LED light will turn off. The remote will exit

the programming mode and you will have to start

over.

COMPONENT

BUTTONS

SELECT

BUTTON

Page 9

STEP 5: Point the AVEX R6 toward the component

(in this example the TV) and punch in the first 3-digit

code that you wrote down for that specific

component. Use the Number buttons 0–9 on the

remote to punch in the code. The TV LED light will

blink each time a number is pressed.

If the 3-digit code number you just punched in is

the correct number, the component you are trying to

program will turn off. If it did not turn off, enter the

next code number from your list until it does turn off.

STEP 6: Once you’ve entered the code number and

the component has turned off, press the POWER

button on the AVEX R6 remote to turn the component

back on.

Next test the VOLUME and CHANNEL buttons (or

PLAY and STOP buttons for VCR and DVD) to make

sure they all work. For example, perhaps your Sony

TV turned off with code number 147, but the volume

controls did not work properly. In this case, try the

next code number listed for that component. Repeat

Step 5 using the next code number until you find a

perfect match.

STEP 7: Once you’ve entered a correct code you

must save it. Press the component button you just

programmed (in this case TV) one more time to save

the code number. The component LED light will blink

three times to confirm that the code was successfully

stored. Now when you press the TV component

button, all of the buttons will work with your TV.

Program the remaining components by repeating

steps 3 through 7.

IMPORTANT: If you have tried all the set-up codes

in the list and the component still did not turn off

after Step 5, either the Auto-Search Method (page

10) or the Learning Method (page 12) will help you

program.

NUMBER

BUTTONS

Page 10

If the Three Digit Code did not work, try this

Auto-Search Method

The Auto-Search Method is a way you can scan

through all of the codes in the table to find the right

code for your component.

STEP 1: Manually or using your old remote, turn on

the component you want to program—for example, to

program your TV, turn on your TV set.

STEP 2: On the AVEX R6, press the Component

button that you want to program (in this case the

button that says TV) and the SELECT [SEL] button at

the same time. Hold down both buttons for 2 seconds

until the TV Component button light turns on. This

signals that you are in programming mode.

IMPORTANT: You have 30 seconds to perform the

next step while you are in programming mode. If you

do not press a button within 30 seconds, the

component LED light will turn off. The remote will exit

the programming mode and you will have to start

over.

DOWN

ARROW

STEP 3: Point the AVEX R6 remote control toward

the component and press the UP arrow (or

DOWN arrow) button once. Each time the UP or

DOWN arrow button is pressed, the code will count

up (or down) one code number and send a Power

OFF signal. When the correct code is sent out, the

component will turn off.

ARROW

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Universal Remote Control Telecomando universale

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-6200L Manuale utente

Universal Remote Control

Universal Remote Control omega MX-650 Manuale utente

Universal Remote Control

Universal Remote Control Complete Control MRF-260 Manuale utente

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-450 Manuale utente

Universal Remote Control

Universal Remote Control MX-900 Manuale del proprietario

Universal Remote Control

Universal Remote Control MRF-300/RFX150 Manuale utente

Universal Remote Control

Universal Remote Control Easy Clicker OCE-0009D Manuale utente

Universal Remote Control

Universal Remote Control WR7 Manuale utente

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Manuale utente

Universal Remote Control

Universal Remote Control ORION MX-850 Manuale utente

Universal Remote Control

Universal Remote Control Complete Control MX-780 Manuale utente

Universal Remote Control

Universal Remote Control COMPLETE CONTROL MX-880Z Manuale utente

Universal Remote Control

Universal Remote Control UR2-DTA Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700 Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700L Manuale utente

Universal Remote Control

Universal Remote Control POWERBLASTER MRF100B Manuale utente

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manuale utente

Universal Remote Control

Universal Remote Control UR4-DSR Manuale utente

Universal Remote Control

Universal Remote Control Osiris MX-3500 Manuale utente

Universal Remote Control

Universal Remote Control OCE-0085A Manuale utente

Universal Remote Control

Universal Remote Control Total Control TRC-1280 Manuale utente

Universal Remote Control

Universal Remote Control Complete Control MX-810 Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700L-IP Manuale utente

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuale utente

Manuali Telecomando universale popolari di altre marche

Pronto

Pronto Peel Manuale utente

GE 24929 Manuale utente

Radio Shack

Radio Shack Wireless Remote Control System Manuale utente

AUVIO

AUVIO Universal Home Theater Remote Manuale utente

Philips

Philips Icon SRU4106 Manuale utente

THOMSON

THOMSON ROC4309 Manuale utente

Philips

Philips pm625S Manuale utente

GE RM94931 Manuale utente

RCA

RCA RCU600WMS - Universal Remote Control Manuale utente

Blackweb

Blackweb BWB17AV002 Manuale utente

Marmitek

Marmitek DoorGuard 300 Manuale utente

Chunghop

Chunghop RM-L618 Manuale utente

GE RM24965 Manuale utente

Anderic

Anderic KTN828 Manuale utente

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuale utente

Medion

Medion E74023 Manuale utente

intensity

intensity RM02A Manuale utente

GE RM24950 Manuale utente