Universal Remote Control Total Control TRC-1280 Manuale utente
TRC-1280
Owner’s Manual
TRC-1280 TOUCH SCREEN
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
This remote control was Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video
installation. It involves an intimate knowledge of how the components
interact and exact details on the proper sequences of control.
Only a Total Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true
automated operation.
Congratulations on your choice!
TRC-1280 Owner's Manual © 2012 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be
copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
TRC-1280 TOUCH SCREEN
Congratulations! 1
Using the TRC-1280 2
Connecting the Battery Pack 3
Using the Charging Base 3
Two-Way via WiFi 3
Displaying the Settings Screen 4
Sleep Settings 5
Wireless Network Settings 5
Brightness 5
System 5
Button Light 6
Power 6
Calibration 6
Date and Time 6
Sound & Vibration 7
Pickup 7
Factory Default 7
Exit 7
Maintaining Your TRC-1280 8
Specifications 8
USA Limited Warranty Statement 9
Precautions and Information Concerning
Rechargeable Lithium Polymer Batteries 10
Federal Communication Commission Interference
Statement 11
Regulatory Information to the user 12
Declaration of Conformity 13
Page 1
TRC-1280 TOUCH SCREEN
Congratulations!
Thank you for purchasing the Total
Control TRC-1280 universal remote
control. This unit can control every
connected device in your home
using the Total Control Advanced
System Controller. You can also
control devices located in different
rooms via Wi-Fi. Controlling your
home is simple with the TRC-1280
remote.
Two-way Instant-Wi-Fi controller with dazzling 2.8”
color touch screen interface
Receive two-way feedback for the rooms and music sources that can be
controlled. Turn On/Off music while also viewing the current selections
artist name, album and song title.
Vibrating Haptic Technology confirms button presses
The TRC-1280 has an Active Matrix color TFT display with vibrating
Haptic feedback technology. When touching of an LCD button, the
screen vibrates to confirm the button press.
Includes rechargeable Lithium Polymer Batteries and charger base
The TRC-1280 comes equipped with a Lithium Polymer battery that is
rechargeable with the 6V charging base. You no longer need to waste
money on disposable batteries or trying to locate misplaced batteries.
Requires MRX-10 or compatible URC Advanced System
Controller
In combination with an MRX-10 or compatible URC Advanced
System Controller, the TRC-1280 can control your system without
being in line-of-sight of the equipment by sending the commands
over your home network.
Programmable only by URC certified professional programmer
on-premises or off-premises via the Internet
To fully automate your audio/video system, the programmer must
have detailed knowledge of each component, LAN configuration,
Wi-Fi optimization and how the system is connected and operated.
With the ability to connect the TRC-1280 to an MRX-10 or
compatible URC Advanced Controller, your installer can program the
remote, with your permission, from his office should the need arise.
Only a trained and certified professional audio/video installer can
install a TRC-1280 remote control in a timely and efficient manner.
Page 2
TRC-1280 TOUCH SCREEN
The 5-way cursor
buttons enables you
to both scroll lists of
artists, albums or
songs from your
Music Server on the
TRC-1280 touch
screen or to navi-
gate TV guides and
menus with ease.
The Main button
always displays the
Main menu pages.
The Page buttons
display additional
pages of controls.
The Volume and
Mute buttons are
always available
regardless of what
screen is displayed.
Using the TRC-1280
The TRC-1280’s Main Menu pages display the activities and devices
in your system. Press the Main page button to see what your choices
are. Large systems may have more than one page. Press either of the
Page buttons to see further options.
Gently press any screen button with your finger to select an activity
or a device. The screen will change to display the buttons you need
for that activity/device. The Page buttons may reveal additional buttons
for some devices and activities.
When you would like to control another device, press the Main or
Page buttons and select a new device from the Main page.
TRC-1280 TOUCH SCREEN
Connecting the Battery Pack
Unlock the rear cover by pressing down on the spring lock at the
top of the cover. Remove the cover. For shipment from the factory,
the battery is left out of the TRC-1280. Place the battery into the
battery compartment, making sure you align the contacts on the
battery to the contacts on the TRC-1280. The battery will snap into
place when aligned properly. Replace the cover and snap it into
place.
Using the Charging Base
Plug the 6V DC adapter into a power outlet
and into the back of the charging base.
Gently place the TRC-1280 into the cradle
of the charging base. It automatically aligns
itself to the contacts on the charging base.
The Status light should immediately light.
Red indicates that it is charging. Blue shows
that it is fully charged. There is no harm in
leaving the TRC-1280 on its charging base
whenever it is not in use.
Two-Way via Wi-Fi
To use the TRC-1280 with any two-way companion product, the
TRC-1280 must be configured by your installer to be part of a LAN
(local area network) via a Wi-Fi b/g access point or router. This is not
user configurable. If you have any questions, consult your custom installer.
Page 3
Red indicates charging, Blue
that the remote is fully charged.
Page 4
Displaying the Settings Screen
You can enter the Settings menu by pressing and holding the
MAIN and OK button for three seconds. Once there, if you do not
press any button on the Settings screen, the TRC-1280 will timeout
after 60 seconds and return to the previous setting or Main screen.
There are two pages of Settings screens. To access the other page,
press either of the Page buttons. To select a setting, press the buton
on the LCD screen. To go back a step or to get out of the settings
screen, press the MAIN button.
There are two pages of Settings screen. To access the other page, press
either of the Page buttons.
TRC-1280 TOUCH SCREEN
Page buttons reveal the
rest of the settings.
Page 2 of the Settings
Screen
Page 5
TRC-1280 TOUCH SCREEN
Sleep Settings
Wi-Fi and backlighting can be separately adjusted
to conserve battery life. Note that when the
backlight is set to turn off, the remote is not connected
to the network. Picking up or waking the TRC-1280 will
reconnect it to the Wi-Fi network.
Wireless Network Settings
WARNING! Only use this button when instructed
to by Technical Support. The screen displays network
information about your TRC-1280 and the wireless
network it is connected to. Do not make any changes
on this screen!
Brightness
Adjust the screen brightness by moving the slider.
Min (minimum) is the dimmest setting and Max
(maximum) is the brightest setting.
System
The System Information screen displays data about
your TRC-1280's Operating System, Memory etc.
Page 6
TRC-1280 TOUCH SCREEN
Button Light
You can adjust the brightness of the LEDs that
backlight the buttons of the TRC-1280. Move
the slider left to dim the backlighting and move
it right to brighten the backlighting.
Power
You can display the remaining charge by selecting
Power. You can also adjust when the Low Battery
warning screen will appear.
Calibration
To calibrate button presses, adjust the onscreen “tap” location with a
pen top or PDA stylus. Using your fingers to calibrate the screen may
result in inconsistent button presses.
Date and Time
Your TRC-1280 may have been programmed to
display the time or date on the touch screen. If
you need to, you can adjust the time displayed
by changing the settings on this screen.
TRC-1280 TOUCH SCREEN
Page 7
Sound & Vibration
Adjust the volume and vibration levels by touching
and dragging the slider to your desired Min/Max levels.
Pickup
You can set your TRC-1280 to only turn on when
touched, or every time you move it. Simply select
On or Off. Also you can adjust the pickup sensitivity
with the slide bar.
Factory Default
WARNING! Only use this button when instructed to by Technical
Support. It resets the memory of the TRC-1280 to the factory settings.
All your programming will be lost!
Exit
When you have finished adjusting Settings, simply tap the Exit button to
return to normal operation.
Altri manuali per Total Control TRC-1280
1
Indice
Altri manuali Universal Remote Control Telecomando universale
Universal Remote Control
Universal Remote Control COMPLETE CONTROL MX-880Z Manuale utente
Universal Remote Control
Universal Remote Control ORION MX-850 Manuale utente
Universal Remote Control
Universal Remote Control OCE-0085A Manuale utente
Universal Remote Control
Universal Remote Control WR7 Manuale utente
Universal Remote Control
Universal Remote Control CABLEVISION OCE-0027A Manuale utente
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8700L-IP Manuale utente
Universal Remote Control
Universal Remote Control omega MX-650 Manuale utente
Universal Remote Control
Universal Remote Control Easy Clicker UR3L-SR4 Manuale utente
Universal Remote Control
Universal Remote Control CLIKR-5 UR5L-8700L Manuale utente
Universal Remote Control
Universal Remote Control UR3-J22TWM Guida per l'amministratore
Universal Remote Control
Universal Remote Control 4 Function DTV Remote Control Manuale utente
Universal Remote Control
Universal Remote Control Easy Clicker UR2-211 Manuale utente
Universal Remote Control
Universal Remote Control MRF-300/RFX150 Manuale utente
Universal Remote Control
Universal Remote Control Universl Remote Manuale utente
Universal Remote Control
Universal Remote Control Osiris MX-3500 Manuale utente
Universal Remote Control
Universal Remote Control COMPLETE CONTROL MX-450 Manuale utente
Universal Remote Control
Universal Remote Control UR2-DTA Manuale utente
Universal Remote Control
Universal Remote Control Complete Control MRF-260 Manuale utente
Universal Remote Control
Universal Remote Control Easy Clicker UR3-SR3 Manuale utente
Universal Remote Control
Universal Remote Control CLIKR-5 UR5L-6200L Manuale utente
Universal Remote Control
Universal Remote Control Customizer URC-300 Manuale utente
Universal Remote Control
Universal Remote Control UR-S86TVE Manuale utente
Universal Remote Control
Universal Remote Control Easy Clicker OCE-0009D Manuale utente
Universal Remote Control
Universal Remote Control Complete Control MX-880 Manuale utente
