Universal Robots UR5 Manuale utente

Service Manual

"Original instructions"

Revision:

UR5_en_3.2.7

Robot:

UR5 with CB3.0/3.1/3.2 - controller

CB3.0 valid from robot s/n 2014350001 to 2016351863

CB3.1 valid from robot s/n 2016351864 to 2019351625

CB3.2 valid from robot s/n 2019351626

Valid from robot s/n: 2014350001

1.Service Manual

The information contained herein is the property of Universal Robots A/S and shall

not be reproduced in whole or in part without prior written approval of Universal

Robots A/S.

The information herein is subject to change without notice and should not be

construed as a commitment by Universal Robots A/S. This manual is periodically

reviewed and revised.

Universal Robots A/S assumes no responsibility for any errors or omissions in this

document.

The Universal Robots logo is a registered trademark of Universal Robots A/S.

2.Content

1.Service Manual 2

2.Content 3

3.General Information 1

3.1. Purpose 1

3.2. Company Details 1

3.3. Disclaimer 1

3.4. Warning Symbols in this Manual 2

4.Recommended Inspection Activities 3

4.1. Controller 3

4.1.1. Inspection Plan 3

4.1.2. Safety Functions 4

4.1.3. Visual Inspection 5

4.1.4. Cleaning and Replacement of Filters 5

4.2. Robot Arm 10

4.2.1. Inspection plan 10

4.2.2. Inspection Plan 11

4.2.3. Functional Inspection 11

4.2.4. Visual Inspection 11

5.Service and Replacement of parts 13

5.1. Handling ESD Sensitive Parts 13

5.1.1. Recommended Tools 16

5.2. Robot Arm 17

5.2.1. Before returning any part to Universal Robots 17

5.2.2. Robot Arm Configuration 18

5.2.3. Brake Release 18

5.2.4. General Guidance to Separate Joint from Counterpart 19

5.2.5. Torque Values 23

5.2.6. Base Joint – Base Mounting Bracket 24

5.2.7. Shoulder joint – Base joint 25

5.2.8. Upper arm – Shoulder joint 27

5.2.9. Elbow joint – Upper arm 29

5.2.10. Elbow counterpart – Elbow joint 29

5.2.11. Wrist 1 joint – Lower arm 30

5.2.12. Wrist 2 joint – Wrist 1 joint 32

User Manual UR5

5.2.13. Wrist 3 joint – Wrist 2 joint 33

5.2.14. Tool flange – Wrist 3 joint 33

5.2.15. Instructions for calibrating a joint 35

5.2.16. Dual Robot Calibration 42

5.2.17. Change joint ID 42

5.2.18. Joint Spare Part Adaptation 44

5.2.19. Wire Bundle Installation Guide 45

5.3. Controller 53

5.3.1. Replacement of Motherboard 3.0 53

5.3.2. Replacement of Motherboard 3.1 55

5.3.3. Upgrade Motherboard 3.0 To 3.1 58

5.3.4. Replacement of Safety Control Board 64

5.3.5. Replacement of Teach Pendant 67

5.3.6. Replacement of 48V power supply 70

5.3.7. Replacement of 12V power supply 77

5.3.8. Replacement of Current distributor 78

6.Software 80

6.1. Update software 80

6.2. Update joint firmware 82

6.3. Using Magic files 84

6.4. Backup of data 85

6.4.1. Hardware Requirements 85

6.4.2. Software Requirements 86

6.4.3. How to Access Linux Partition from Windows 86

6.4.4. Copy the data from CF-card to UR-USB 87

7.Troubleshooting 94

7.1. Error codes 94

7.2. LED indicators and Fuses on Safety Control Board 147

7.2.1. Normal Startup Sequence for a CB3.x UR5 149

7.3. Error Phenomena 150

7.3.1. Control Box: NO CONTROLLER Displayed in Initializing 150

7.3.2. NO CABLE Displayed During Power Up 151

7.3.3. Protective Stop 151

7.3.4. Power on Failure in Initializing 153

7.3.5. Checklist After a Collision 155

7.3.6. Communication to Joints and Tool 156

7.3.7. Complete Rebooting Sequence 156

UR5 User Manual

7.4. Electrical Drawing 157

7.4.1. Schematic Overview 162

7.4.2. E-Plan Diagrams 166

8.Spare Parts 173

8.1. Robot arm 173

8.2. Controller 174

8.3. Tools 176

9.Packing of Robot 177

10.Change Log 179

User Manual UR5

UR5 User Manual

3.General Information

3.1. Purpose

The main purpose of this manual is to help the user safely perform service-related operations

and troubleshooting.

Universal Robots industrial robots are designed using high quality components to ensure a long

lifetime.

However, any improper use of robot can potentially cause failures. If for example, the robot is

overloaded, run with a load not recommended by Universal Robots, dropped during relocation,

damaged by collision or any other improper usage, the warranty will be void.

Universal Robots recommends that the user does not attempt repair, adjustment or other

intervention in the mechanical or electrical systems of the robot without first consulting a UR

certified service engineer. Any unauthorized intervention will void the warranty. Service-related

operations and troubleshooting should only be performed by qualified personnel.

Before performing service-related operations, always make sure to stop the robot program and

disconnect the main power to any potential dangerous tool on the robot or in the work cell.

In the event of a defect, Universal Robots recommends ordering new parts from the Universal

Robot distributor where the robot was purchased from.

Alternatively, parts can be ordered from the nearest distributor, details of which can be obtained

from Universal Robots official website at www.universal-robots.com

3.2. Company Details

Universal Robots A/S

Energivej 25

DK-5260 Odense Denmark

Tel.: +45 89 93 89 89

Fax: +45 38 79 89 89

3.3. Disclaimer

Universal Robots continues to improve reliability and performance of its products, and therefore

reserves the right to upgrade the product without prior warning. Universal Robots takes every

care that the contents of this manual are precise and correct, but takes no responsibility for any

errors or missing information.

User Manual 1 UR5

3.General Information

3.4. Warning Symbols in this Manual

DANGER, WARNING, CAUTION, NOTICE and SAFETY INSTRUCTION statements are used

throughout this manual to emphasize important and critical information.

You MUST read these statements to help ensure safety and to prevent product damage.

The statements are defined below.

DANGER

These warnings mean a hazardous situation which, if not avoided, will result in

death or serious injury.

WARNING

These warnings mean a hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION

These warnings mean a hazardous situation which, if not avoided, could result in

minor or moderate injury.

NOTICE

These warnings mean damage to property may occur if no precautions are taken.

CAUTION

This warning sign contain references to safety-relevant information or general

safety measures.

This warning sign do not refer to individual hazards or individual precautionary

measures.

UR5 2 User Manual

3.General Information

4.Recommended Inspection Activities

It is recommended to perform preventive maintenance on the control box and

robot at least once per year. In case of use in dirty or dusty environments it is

recommended to increase the frequency.

In case dust/dirt/oil is observed on the controller or robot arm, it can be wiped away using a cloth

with cleaning agent. Cleaning agent: Water, Isopropyl alcohol, 10% Ethanol alcohol or 10%

Naphtha.

In very rare cases, very small amounts of grease can seep from the joint. This does not affect

the specified function or lifetime of the joint.

NOTICE

Never use compressed air to clean the controller or robot arm as it can damage

the seals and internal components

4.1. Controller

4.1.1. Inspection Plan

Set forth below is a check list of inspections that Universal Robots recommends be performed

according to the marked time interval. If upon inspection, the referenced parts are not in an

acceptable state, please rectify immediately.

User Manual 3 UR5

4.Recommended Inspection Activities

Use the following sections as guide:

2.1.2 Safety Functional

2.1.3 Visual Inspection

3.2 Control Box

Monthly Bi-annually Annually

Check Emergency stop on Teach Pendant F X

Check Backdrive mode F X

Check Freedrive mode F X

Check safety inputs and outputs

(if connected) F X

Check Teach Pendant cable V X

Check and clean air filters on Control Box V X

Check terminals in Control Box F X

Check electrical grounding 1< Ω to Control Box F X

Check main power to Control Box F X

V = Visual inspection F = Functional inspection

4.1.2. Safety Functions

The robot safety functions must be tested at least once a year to ensure correct function. The

following tests must be performed.

• Backup data from the storage device - See section 4.4 Backup of data

• Test that the Emergency Stop button on the Teach Pendant functions:

• Press the Emergency Stop button on the Teach Pendant.

• Observe that the robot stops and turns off the power to the joints.

• Power on robot again.

• Test Freedrive mode:

• Unmount attachment or set TCP/Payload/CoG according to tool specifications.

• Set the robot in Free drive mode by holding the black Freedrive button on the back of

the Teach Pendant.

• Move the robot to a position stretched out horizontally to the edge of its workspace.

• Monitor that the robot maintains its position unsupported while the Freedrive button

is still pressed.

• Test Backdrive mode:

If the robot is close to collision, the BACKDRIVE function can be used to move the robot to

a safe position before initializing.

• Press ON to enable power, state will change to Idle.

• Press and hold Freedrive -> status will change to BACKDRIVE.

• Move the robot by hand as in Freedrive.

UR5 4 User Manual

4.Recommended Inspection Activities

Altri manuali per UR5

Indice

Altri manuali Universal Robots Robotica

Universal Robots

Universal Robots E Series Manuale utente

Universal Robots

Universal Robots UR3/CB3 Manuale utente

Universal Robots

Universal Robots ur3 Manuale utente

Universal Robots

Universal Robots UR-6-85-5-A Manuale utente

Universal Robots

Universal Robots UR5/CB3 Manuale utente

Universal Robots

Universal Robots UR5 Manuale utente

Universal Robots

Universal Robots UR20 Manuale utente

Universal Robots

Universal Robots UR5 Manuale utente

Universal Robots

Universal Robots e Series Istruzioni operative

Universal Robots

Universal Robots UR5 Manuale utente

Universal Robots

Universal Robots UR5 Manuale utente

Universal Robots

Universal Robots CB3 Manuale utente

Universal Robots

Universal Robots UR-6-85-5-A Manuale utente

Universal Robots

Universal Robots UR3/CB3 Manuale utente

Universal Robots

Universal Robots ActiNav Manuale utente

Universal Robots

Universal Robots e Series Manuale utente

Universal Robots

Universal Robots ur3 Manuale utente

Universal Robots

Universal Robots OEM Control Box Manuale utente

Universal Robots

Universal Robots e Series Manuale utente

Universal Robots

Universal Robots 3PE Teach Pendant Manuale utente

Universal Robots

Universal Robots CB3 Manuale per l'uso e la cura

Universal Robots

Universal Robots ActiNav Manuale utente

Universal Robots

Universal Robots e Series Manuale utente

Universal Robots

Universal Robots UR5 Manuale utente

Manuali Robotica popolari di altre marche

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuale utente

SunFounder

SunFounder PiDog Manuale utente

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuale utente

EFORT

EFORT ECR5 Manuale di istruzioni

Epson

Epson C8 Series Manuale utente

WowWee

WowWee ROBOQUAD Manuale utente

Milvus Robotics

Milvus Robotics SEIT 100 Manuale utente

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuale utente

fischertechnik

fischertechnik Mini Bots Manuale utente

YASKAWA

YASKAWA MA2010 Manuale

Abicor Binzel

Abicor Binzel iCAT mini Manuale utente

ABB

ABB OmniCore E10 Manuale utente

YASKAWA

YASKAWA Motoman DX200 Manuale utente

pitsco

pitsco Tetrix Max Manuale utente

ECOVACS

ECOVACS DEEBOT R95 Manuale utente

Feng Yuan

Feng Yuan Interstellar Warrior Manuale utente

SCHUNK

SCHUNK AGE-S-XYZ Istruzioni utente

Moorebot

Moorebot Scout Manuale utente