UTStarcom PC5740 Manuale utente
PC5740 User’s Manual
Alltel Universal Dialer
CONTENTS
1. BEFORE USING PC5740
1
1.1 About this User’s Manual
1
1.2 Product Overview
1
1.3 What’s Inside the Product Package
1
1.4 Introduction to Alltel Wireless PC5740 PC Card
1
1.5 Product Features
2
1.6 Product Handling
3
1.7 Configuration
3
2. INSTALLATION AND SETUP FOR THE UNIVERSAL DIALER
4
2.1
The Universal Dialer Setup Program 4
2.2
The ALLTEL Internet Accelerator Program 7
2.3
The Universal Dialer Setup Wizard 8
3. USING UNIVERSAL DIALER
10
3.1
Features 10
3.2
Getting Started 11
3.3
Connecting 12
3.4
Warning Message 14
3.5
Using Dial Up Connections 15
4. UNIVERSAL DIALER PREFERENCES
16
4.1
General Preferences 16
4.2
WWAN Specific Settings 18
4.3
Additional Features 21
5. INSTALLING PC5740
26
5.1
Precautions 26
5.2
Recommended System Requirements 26
5.3
Installing Software 27
5.3.1 Installation 27
5.3.2 Warnings 27
5.3.3 Notes 27
5.3.4 Unplugging or Ejecting the Card 28
6. REGULATORY AND SAFETY INFORMATION
32
6.1 Regulatory Notices 32
6.2 Operating Conditions 32
6.3 Warnings and Cautions 32
6.4 Safety Precautions 33
7. LIMITED WARRANTY
35
CONTENTS
1. BEFORE USING PC5740
1.1 About this User’s Manual
You will find all the information you need to install and use the PC5740 in this user’s
manual. Before using PC5740, you must properly install the PC5740 by closely
following the installation instructions.
1.1.1 Instructions
• Install the PC5740 software before inserting the PC5740 card into your laptop.
The installation software is included in the product package. Insert the CD into
your CD-ROM drive. Installation may take a few minutes.
• It is highly recommended that you read the safety precautions described in
this manual before using the PC5740.
1.2 Product Overview
Thank you for purchasing Alltel Wireless PC5740 PC Card.
The PC5740 is a 3G wireless card that enables high-speed wireless communication
from your laptop. PC5740 is simple to install and use.
1.3 What’s Inside the Product Package
Following items are included in the product package. If any of the items listed below
is missing, please contact the retail location where you purchased the product.
- PC5740 Wireless PC Card Modem
- Installation CD that contains software and this user’s manual
1.4 Introduction to Alltel Wireless PC5740 PC Card
The Alltel Wireless PC5740 is designed for type II PC card slot, which is available in
most laptop models. PC5740 can be used to access the Internet, your company’s
intranet, or you can use it to send and receive email. It is extremely useful when you
are away from the office, on the road, or where ever a wireline Internet access is not
readily available.
1
PC5740 User’s Manual
1.5 Product Features
- Power management: PC5740 utilizes power management and system overhead
reduction functions provided by the standard 32-bit CardBus electrical interface for
maximum power savings.
- Antenna design: Efficient, innovative design optimizes data transfer rate and
sensitivity to network signals.
- Type II PCMCIA format that supports CardBus I/O interface.
- Supports North American PCS (1900 MHz) and Cellular (800 MHz) bands.
- Utilizes QUALCOMM MSM6500 chip set.
- Supports 3G network technologies.
- Optimized data rate: Maximum 2 Mbps receiving speed and maximum 144 kbps
sending speed.
- Supports WIN 2000 and XP systems with installed host software and driver.
- Provides Axcess Boradband and Axcess MobileLink service.
2
PC5740 User’s Manual
3
1.6 Product Handling
1) Do not put any adhesive label on the PC5740 card. It may leave a
sticky residue that can cause problems inside the laptop PC card slot.
2) PC5740 card should easily slide into the PC card slot.
Do not force the PC5740 into the slot as it may cause damage to the
card and/or the slot.
3) Keep PC5740 in a dry and clean place.
(Storage temperature: - 30° to 65°C [86° to 149°F]). Keep your card
away from liquids, dust and excessive heat.
1.7 Configuration
To use the PC5740, you should install the software included in the installation CD
and configure the PC5740 card. See the next section for more infomration on
software installation and PC card configuration.
PC5740 User’s Manual
2. INSTALLATION AND SETUP FOR THE UNIVERSAL DIALER
This section will guide you through the installation and setup process for the
Universal Dialer. Before getting started, you should become familiar with the
documentation that came with your mobile phone or PC Card.
CD’s
1. If you purchased a PC Card, there is only one CD that contains Universal Dialer
and PC Card drivers.
Getting Started
Follow these steps to install Universal Dialer:
1. Turn on your computer and close all applications.
2. Insert the CD-ROM into your CD drive.
3. If set up does not automatically start, click the Start button on the taskbar and
choose Run. Type D:\Start (where D is the letter of your CD-ROM drive) and
click OK.
4. Follow the steps in the next section...
* Universal Dialer software must be installed before you insert the PC Card in to the
computer for the first time. Only after the software has been installed can
Windows successfully install and configure the PC Card.
2.1 The Universal Dialer Setup Program
STEP 1: Double-click the Universal Dialer setup program. You will be presented with a
“Welcome” screen. Click the Next button to continue with the installation process.
4
PC5740 User’s Manual
STEP 2: After the Welcome screen you will see the Universal Dialer License Agreement.
In order to install and use this product you must agree with the terms of this agreement.
Select “I agree with this software license agreement”, then click the Next button to continue.
If you do not agree with this agreement, click the Cancel button to exit.
STEP 3: You are now ready to select the location on your computer where the Universal Dialer
should be installed. It is recommended that you do not modify the default destination folder.
Click the Next button to continue.
STEP 4: During this step the components of the Universal Dialer product are being installed
onto your computer.
Installation will occur to the destination folder specified in Step 3 above.
5
PC5740 User’s Manual
STEP 5: Installation is now complete. Click the Finish button to leave the Universal Dialer
setup program and begin using your new software.
* The setup program will automatically create a Universal Dialer shortcut on
your desktop.
6
PC5740 User’s Manual
2.2 The ALLTEL Internet Accelerator Program
STEP 1: The components of the Internet Accerelator product will be installed onto your
computer automatically.
STEP 2: Click the Finish button to leave the Internet Accelerator setup program.
7
PC5740 User’s Manual
2.3 The Universal Dialer Setup Wizard
After you have successfully completed the installation process of Universal Dialer, you are
ready to start the Universal Dialer program and begin your initial setup. The steps in the Setup
Wizard are critical to the proper operation of Universal Dialer.
STEP 1: Click the Start button, select the Programs menu and choose the Universal Dialer
menu item to start the Universal Dialer program.
STEP 2: On first-run of Universal Dialer the Setup Wizard will automatically run. You will be
presented with a Welcome screen.
If you have an Internet connection, it is recommended that you check to see if you are running
the latest version of Universal Dialer. Click the Check for Updates button to perform this check.
Click Next to continue.
STEP 3: For PC Card users, insert your PC Card now, and wait for Windows to detect and
install drivers for the device.
8
PC5740 User’s Manual
Indice
Altri manuali UTStarcom Scheda di rete
Manuali Scheda di rete popolari di altre marche
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuale utente
National Instruments
National Instruments NI 9234 Manuale utente
Hama
Hama 49276 Manuale utente
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo
Compaq
Compaq Wireless LAN 100 Manuale utente
Bose
Bose PowerMatch Dante Manuale utente