V-tech InnoTV Manuale utente
User's Manual
For troubleshooting tips, visit: www.vtech.co.uk/tutorials/innotv
2
Included in This Package
InnoTV™ Play &
Learn Starter Pack
Cartridge
Power Adaptor Wrist Strap Quick Start
Guide
Product Information
Guide
HDMI Cable InnoTV™ Controller Model: 2190
InnoTV™ Console
Model: 1836
3
Power Button Exit Button
Enter Button
Smart Wheel
Help Button
Joystick
Red Button
Connection
Indicator Light
Green Button
Cartridge Eject Button
microSD Card Slot
(microSD card not included)
Power Button
Product Features
InnoTVTM Console
InnoTVTM Controller
Backup Battery Slot & Cover
HDMI
Port
Micro-USB
Port
Adaptor
Jack
Back View
Cartridge Slot
Microphone Jack
(Microphone not included)
Battery Door
Player Selector
Left/Right
Hand Switch
Wrist Strap Fastener
4
Connecting the InnoTV™ Console to a TV
1. Turn off your television set.
2. Plug the end of the HDMI cable nearest to the ferrite core into the
HDMI Out port located on the back of the console, and then connect
the other end to the HDMI In port on the television.
3. Insert the Power Adaptor plug into the InnoTV™, and then plug the
Power Adaptor into a power outlet.
4. Turn on your television set and select the proper HDMI input.
Turning the Console on and off
1. Turn on the TV, and then set the TV input to HDMI.
2. Press and hold the Power button until the green light comes on.
3. To turn the console off, press the Power button again. The green light
will turn off.
HDMI Out
Port
Adaptor
Jack
HDMI In Port
Ferrite core
Light Power Button
5
Connecting the Console to Wi-Fi
To adjust the console's Wi-Fi connection:
1. Select the Green button in the Profile Selection menu to access
Parental Controls directly, or select the Green button within the console
desktop area and then select the Parental Controls icon.
2. In the Parental Controls menu, select Wi-Fi Settings.
3. Make sure Wi-Fi is on. Select the network that you would like to
connect to, and enter a password if needed. When the connection
is set up, select the tick at the top of the screen to return to the
Parental Controls menu.
Note: InnoTVTM supports 802.11 b/g/n wireless standards.
Select this switch to turn on Wi-Fi.
6
Setting up the InnoTVTM
Follow these steps to set up your InnoTV™ before the first use:
1. Set up a Wi-Fi Internet connection.
2. Your InnoTV™ console may require a firmware update before use. If
this is the case, follow the instructions on-screen to download and
install the firmware update.
3. Once installation is completed the console will restart, and you will be
prompted to register your InnoTV™. Complete the necessary steps
to register your console.
4. Don't forget to set a Parental Controls passcode when you're done
to prevent your child from accessing the console settings.
Inserting a microSD Card
You can insert a microSD memory card (not included) into your InnoTV™
to expand the available memory for downloaded content, photos,
videos or music. The InnoTV™ is compatible with microSD memory
cards up to 32GB.
• Makesure the console is turned off.
• LocatethemicroSDcardslotontheside.InsertthemicroSD
card as shown above.
7
Inserting/Removing Cartridges
Using the InnoTVTM Controller
Inserting batteries into the controller
1. Open the battery compartment located under the controller.
2. Insert 2 AA batteries, in accordance with the polarities indicated
inside the battery compartment.
3. Put the cover back in place.
Insert a cartridge into the cartridge
slot on the top of the console. The
cartridge should lock into place.
Press the (Eject)
button to remove the
cartridge.
8
Attaching the Wrist Strap to the Controller
1. Locate the wrist strap fastener on the bottom of the controller. Attach
the wrist strap through the hole.
2. Place your hand through the wrist strap so that the strap fits
comfortably around your wrist. Hold the controller firmly in your
hands while playing.
Wirelessly Connecting the Controller to InnoTVTM
1. Press the controller's Power button to turn on the controller. The
Connection Indicator Light will start to blink.
2. Once a wireless connection between the controller and the InnoTV™
is established, the Connection Indicator Light will stop blinking and
will stay lit.
3. When you're done using the controller, press and hold the controller's
Power button for three seconds to turn it off.
Connection
Indicator Light
9
Changing the Player Selection Setting
Locate the Player Selection Switch on the bottom of the controller. Move
the switch to Player 1, 2, 3, or 4. Make sure each controller is set to a
different player. Setting more than one controller to the same player
may cause the controller to function abnormally.
Switching Between Left-Handed or Right-Handed Use
The InnoTV™ controller accommodates both right-handed and left-
handed players. Turn the switch on the bottom of the controller to the
left-handed or right-handed position. You will hear a click when the
controller is locked into place.
Note: One controller
will need to be set to
Player 1 in order for the
system and games to
operate.
10
For Best Results While Playing Games
• Forbestresults,placetheInnoTV™ console in front of the TV. Then
align the centre of the InnoTV™ console with the centre of the TV.
• AvoidblockingthesignalbetweentheInnoTV™ console and wireless
controller.
• The optimal distance between the InnoTV™ console and wireless
controller is 3 to 15 feet.
• Avoidhavingbrightlightsources,includingsunlight,shinebehindor
near the TV toward the controller.
• Avoidhavingotherradio-frequencydevicesinthegameplayarea.
• AvoidputtingtheInnoTV™ console on a metal table or near metal
objects.
The recommended
distance between
the InnoTV™
console and
wireless controller
is 3 to 15 feet.
CAUTION : We recommend using the wrist
strap while playing.
Altri manuali per InnoTV
4
Indice
