Velleman VM109 Manuale utente

Two channel remote control set

VM109

Two channel remote control set 2

2-Kanaal RF afstandsbedieningsset 10

Module commandé à distance 2 canaux RF 18

2-Kanal-RF-Fernbedienungssteuerung-set 26

Módulo receptor código RF de 2 canales con mando a distancia 34

Thank you for purchasing this module. Please read the instructions carefully to ensure correct and safe use.

WARRANTY

This product is guaranteed against defects in components and construction from the moment it is purchased and for a period of ONE YEAR starting from the

date of sale. This guarantee is only valid if the unit is submitted together with the original purchase invoice. VELLEMAN Ltd limits its responsibility to the

reparation of defects or, as VELLEMAN Ltd deems necessary, to the replacement or reparation of defective components. Costs and risks connected to the

transport, removal or placement of the product, or any other costs directly or indirectly connected to the repair, will not be reimbursed by VELLEMAN Ltd.

VELLEMAN Ltd will not be held responsible for any damages caused by the malfunctioning of a unit.

CONTENTS :

FEATURES & SPECIFICATIONS......................................................................................................................................................... 3

CONNECTION....................................................................................................................................................................................... 4

TRANSMITTER INSTRUCTIONS......................................................................................................................................................... 5

RECEIVER INSTRUCTIONS................................................................................................................................................................ 6

SAFETY & WARNINGS ........................................................................................................................................................................ 9

Contents

WARNING

DISCONNECT AC OR DC POWER DURING INSTALLATION!

READ THE OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS

USER GUIDE CAREFULLY!

Specifications & features

Specifications and features

FEATURES

 Two relay contact outputs.

 Transmitter included (optional extra: type VM108).

 ON/OFF (toggle) or timer-mode (pulse)

 Learning unique 32-bit random code.

 Up to 31 different transmitters can be stored.

 Code memory can be erased for safety purposes.

 LED indicators for outputs and functions.

 Special function in timer mode: If both transmitter buttons are pressed, both outputs can be set simultaneously.

 For various control applications, garage door, house door, light, car...

SPECIFICATIONS

Receiver:

 Power supply : 9 to 12V AC or DC / 100mA max.

 Relay contacts NO / NC: 3A each.

 Selectable timers per output: 0.5s, 5s, 30s, 1min, 5min, 15min, 30min and 60min.

 Open field range of up to 30m possible.

 On board antenna or external antenna.

 Dimensions : 100 x 82mm.

Transmitter:

 12V battery type: V23GA, GP23GA... (included).

 CE compliant 433MHz operation.

 32 Bit random code generation.

 Over 1.000.000.000 combinations.

 Dimensions: 63x40x16.

Connection

CH1/ CH2

CH2 indicator “LD2”

CH1 indicator “LD1”

Confirm/timer indicator “LD4”

Mode/timer indicator “LD3”

AC or DC power

‘Setup’ button

 See connection diagram also on page 43.

NO NC

COM

Antenna *

*CUT ANTENNA IF <10M RANGE IS SUFFICIENT !

The transmitter comes with a factory set default code. However, for security reasons, it might be wise not to use the default code.

1. Open the enclosure (see picture) :

2. To program your unique code :

 Hold SW1(*) (left button).

 Briefly press the 'program'-button (SW3) 3 times. The LED will flash 3 times.

 Release SW1.

 Your unique 32-bit code has been generated and stored.

(*If you hold SW2 (right button) instead of SW1 (left button), the unit will generate and store your unique 32-bit code and

the transmitter will be configured in such a way that continuous transmission is not possible i.e. if you hold either button

transmission will stop after a +/- 1s)

3. To return to the default code :

 Hold SW1 (left button).

 Hold the 'program'-button (SW3).

 After +/- 10s the led will flash 5 times.

 Release both buttons.

 Your code has been erased.

Transmitter instructions

SW3

SW1 SW2

Receiver instructions

At power up, the ‘CONFIRM’-led turns on, hereby indicating that the unit is operational. At this time, it will respond to the

default code emitted by the transmitter. If you have changed the code of your transmitter (recommended), then the receiver

needs to ‘learn’ the new code.

To learn a remote :

1. Hold 'setup' button, ‘SELECT’-led turns on after a few seconds.

2. Hold any remote button.

3. ‘CONFIRM’-led lights when the code has been grabbed.

4. Release 'setup' button.

Repeat steps 1 through 4 so the receiver can learn the codes for other transmitters

 31 transmitters can be stored.

 If the memory is full, ’SELECT’ and ’CONFIRM’ will flash simultaneously when 'setup' button is pressed

To remove all remotes from memory :

1. Turn off the power (remove power cord).

2. Hold 'setup' button

3. Turn on power

DISCONNECT RELAY OUTPUTS DURING SETUP!

4. ‘SELECT’ and ’CONFIRM’ start flashing.

5. Release 'setup' when leds turn off.

 This process takes about 10 seconds.

 If the button is released before the leds turn off, the memory will not be cleared.

 The unit will now respond to the default code only.

Configuration of CH1 and CH2 :

1. Push 'setup'-button repeatedly to select CH1 (left) or CH2 (right) configuration.

2. Confirm with a long push (‘CONFIRM’ flashes 3 times).

The selected relay will remain ON.

3. Push ‘setup’-button a number of times, depending on the desired mode (see table).

At each press, ‘SELECT’ will flash a number of times, indicating the current mode.

 The unit returns to normal operation when left idle for 10s.

4. Confirm with a long push (‘CONFIRM’ flashes 3 times).

The selected channel will turn off and the unit is ready for use.

If necessary, repeat sequence for the remaining channel.

Factory defaults: CH1: 1h timer, CH2: 0.5s timer

flashes Mode

ON/OFF

0.5s timer

5s timer

30s timer

1min timer

5min timer

15min timer

30min timer

1h timer

Instructions

Use :

The left remote button controls CH1 relay, the right remote button controls CH2 relay. Each relay is equipped with a status

LED.

In ‘0.5s timer’-mode, a relay will remain on for as long as the remote button is held.

If a timer has been set for a particular channel, the relay will turn on when the button is pushed. When the preset time has

elapsed, the relay will turn off.

A timer can be turned off at any time by pressing the transmitter button again.

As long as the timer is running, the corresponding led will flash.

In ‘ON-OFF’-mode, the relay will toggle between ON and OFF every time a button is pushed.

⇒ Extra feature : If both channels are configured as ‘timer’, you can press both remote buttons simultaneously to operate

both channels at the same time.

Receiver instructions

Safety and warning instructions

All repairs should be executed by qualified technicians.

Avoid the installation of the module in locations with standing or running water or excessive humidity. Indoor use

only !

SAFETY INSTRUCTIONS

 Do not attempt to disassemble the unit as it does not contain any parts that are to be serviced by the user. (Tampering voids warranty)

 Handle the module gently and carefully. Dropping it can damage the circuit board and case.

 Never exceed the protection limit values indicated in the specifications.

 As safety requirement vary, please check with your local authorities.

 No objects or liquids should be allowed to penetrate the housing.

 Disconnect the module from the AC power before connecting new devices.

 Wipe the device with a dry and clean cloth. Do not use detergents or other liquids that may damage the housing.

 Keep the device away from children.

 Facilitate the operation of the device by familiarising yourself with its adjustments and indications.

 Velleman modules are not suitable for use or as part of life support systems, or systems that might create hazardous situations of kind.

Repair under warranty is only possible with date and proof of purchase.

WARNINGS

Hartelijk dank voor de aanschaf van deze module.

WAARBORG

Dit produkt is gewaarborgd wat betreft gebreken in materialen en vakmanschap op het ogenblik van de aankoop en dit gedurende een periode van EEN JAAR vanaf de

aankoop. De waarborg geldt enkel indien het produkt voorgelegd wordt samen met het origineel aankoop bewijs. De verplichtingen van VELLEMAN N.V. beperken zich tot

het herstellen van defecten of, naar vrije keuze van VELLEMAN N.V., tot het vervangen of herstellen van defecte onderdelen. Kosten en risico’s van transport; het wegnemen

en terugplaatsen van het produkt, evenals om het even welke andere kosten die rechtstreeks of onrechtstreeks verband houden met de herstelling, worden niet door VELLE-

MAN N.V. vergoed. VELLEMAN N.V. is niet verantwoordelijk voor schade van gelijk welke aard, veroorzaakt door het falen van een product.

INHOUD :

EIGENSCHAPPEN & TECHNISCHE GEGEVENS ........................................................................................................................... 11

AANSLUITING ..................................................................................................................................................................................... 12

INSTRUCTIES VOOR DE ZENDER................................................................................................................................................... 13

INSTRUCTIES VOOR DE ONTVANGER .......................................................................................................................................... 14

VEILIIGHEIDSAANWIJZINGEN EN WAARSCHUWINGEN ............................................................................................................. 17

Inhoud

WAARSCHUWING