Viavi P5000i Manuale elenco delle parti
VIAVI Solutions
Quick Card
P5000i Fiber Microscope
Fiber Inspection with FiberChekPRO™
This quick card describes how to use the P5000i Fiber Inspection Microscope and VIAVI FiberChekPRO
software to inspect a simplex fiber endface.
Equipment Requirements:
•P5000i Probe Fiber Inspection Microscope
•Personal Computer (PC) or Laptop
•FiberChekPRO software with 2.3 version or
greater (download at
http://fcpro.updatemyunit.net/)
•Bulkhead and Patch Cable Tips matching the
Fiber Under Test
•Fiber optic cleaning tools
Figure 1: Equipment Requirements
The following information is required to
complete the test:
•Type of Fiber (Multimode or Single Mode)
•Type of Connectors (SC UPC, SC APC, etc.)
•Type of Inspection Tips (See Figure 2):
oStandard Patch Cable Tip (FBPT-U12M,
FBPT-U25M, FBPT-U25MA, etc.)
oStandard Bulkhead tip (FBPT-SC, FBPT-SC-
APC, FBPT-LC, etc.)
oLong Reach Bulkhead tip (FBPT-LC-L,
FBPT-SC-L, etc.)
oAngled Bulkhead Tip (FBPT-LC-A6S, FBPT-
SC-A6, etc.)
Figure 2: Common “Standard” Inspection Tips
Set up the P5000i Microscope:
1. Connect the P5000i USB Connector to a USB
port on the laptop.
2. Connect the appropriate patch cable or
bulkhead Inspection Tip to the P5000i Fiber
Inspection Microscope by loosening and
tightening the Retaining Nut on the P5000i
Fiber Probe Barrel Assembly.
Note: Some tips connect directly to the probe,
without a barrel assembly. Consult the VIAVI Tips
& Adapters Selection Guide for more information.
Figure 3: P5000i Microscope
Set up FiberChekPRO software:
1. Press the FiberChek PRO icon from the Windows Start menu on your PC or laptop to launch
FiberChekPRO.
2. Using the drop-down menus at the top of the screen, select the OPTICAL SETTING and PROFILE
that match the tip and fiber under test:
•OPTICAL SETTINGS (Tips):
oStandard Tips (with BAP1) for Standard Patch Cable Inspection Tips (i.e. FBPT-U12M,
FBPT-U25M, FBPT-U25MA) and Standard Bulkhead Inspection Tips
(i.e. FBPT-LC, FBPT-SC, FBPT-SC-APC)
oSimplex Long Reach (-L) Tips for Long Reach Inspection Tips
(i.e. FBPT-LC-L, FBPT-SC-L)
•PROFILES:
oSM UPC (IEC-61300-3-35 Ed. 2.0) for Single Mode Fiber Ultra Polished Connectors
oSM APC (IEC-61300-3-35 Ed. 2.0) for Single Mode Fiber Angled Polished Connectors
oSM PC & Fiber Stub (IEC-61300-3-35 Ed. 2.0) for Single Mode Fiber Polished Connector
oMM (IEC-61300-3-35 Ed. 2.0) for Multimode Fiber
Figure 4: Optical Settings and Profiles
VIAVI Solutions
Contact Us +1 844 GO VIAVI
(+1 844 468 4284)
To reach the VIAVI office nearest you,
visit viavisolutions.com/contacts.
© 2020 VIAVI Solutions Inc.
Product specifications and descriptions in this
document are subject to change without notice.
Run Pass/Fail Analysis:
1. Insert the Bulkhead Inspection Tip into the bulkhead or insert the Patch Cable ferrule into the Patch
Cable Inspection Tip on the P5000i Microscope Probe.
2. Adjust the Focus Control Wheel of the P5000i microscope to focus the fiber endface. The left
horizontal bar on the screen indicates the level of focus adjustment. The higher the level, the better
the focus. The red line indicates optimal focus for that fiber. Focus the image until the focus bar is
as close to the line as possible.
Figure 5: Live Inspection View
3. Press the test button on the microscope or click on the TEST button in the left column of FiberChekPRO to
run the fiber inspection test.
4. If the test fails, clean the fiber endface and repeat steps 1 through 3.
5. If the test passes, you are ready to Connect.
Figure 6: Failed Test Figure 5: Passing Test
Note: Both the patch cable and bulkhead should pass inspection before connection.
Altri manuali per P5000i
4
Indice
Altri manuali Viavi Microscopio
Viavi
Viavi P5000i Manuale elenco delle parti
Viavi
Viavi FVAi-2030 Manuale utente
Viavi
Viavi FiberChek Manuale elenco delle parti
Viavi
Viavi FiberChek Manuale utente
Viavi
Viavi P5000i Manuale elenco delle parti
Viavi
Viavi OneAdvisor ONA-800 Manuale elenco delle parti
Viavi
Viavi FVAm Series Manuale utente
Viavi
Viavi FiberChek Manuale utente
Viavi
Viavi INX 760 Manuale utente
Viavi
Viavi P5000i Manuale utente
