Viavi Certifier Series Manuale utente

CERTIFIER40G

MPO Certification Testing

User Manual

Certifier Series (C40G)

Notices

No part of this manual may be reproduced in any form or by any means (including electronic

storage andretrievalor translation intoa foreignlanguage) without prior agreement and written

consent from Viavi Solutions as governed by international copyright Laws.

Warranty

The material contained in this document is provided “as is,” and is subject to being

changed, without notice, in future editions. Further, to the maximum extent permitted

by applicable law, disclaims all warranties, either express or implied, with regard to this

manual and any information contained herein, including but not limited to the implied

warranties of merchantability and fitness for a particular purpose. Viavi Solutions shall

not be liable for errors or for incidental or consequential damages in connection with

the furnishing, use, or performance of this document or of any information contained

herein. Should Viavi Solutions and the user have a separate written agreement with

warranty terms covering the material in this document that conflict with these Terms,

the warranty terms in the separate agreement shall control.

WARNING

A CAUTION notice denotes a hazard.

It calls attention to an operating procedure, practice, or the like that, if not

correctly performed or adhered to, could result in damage to the product or

loss of important data. Do not proceed beyond a CAUTION notice until the

indicated conditions are fully understood and met.

CAUTION

Operating procedure, practice, if not correctly performed or adhered to, could

result in personal injury or death. Do not proceed beyond a WARNING notice

until the indicated conditions are fully understood and met.

General Safety Information

WARNING

Do not use the device if it is damaged. Before you use the device, inspect the casing.

Look for cracks or missing plastic. Do not operate the device around explosive gas,

vapor, or dust.

Always use the device with the cables provided.

Observe all markings on the device before establishing any connection.

When servicing the device, use only the specified replacement parts.

Do not operate the device with the cover removed or loosened.

Use only the power adapter provided by the manufacturer to avoid any unexpected

hazards.

CAUTION

If the device is used in a manner not specified by the manufacturer, the device protection may

be impaired.

Always use dry cloth to clean the device. Do not use ethyl alcohol or any other volatile liquid to

clean the device.

Do not permit any blockage of the ventilation holes of the device.

Environmental Conditions

This instrument is designed for indoor use and in an area with low condensation. The table

below shows the general environmental requirements for this instrument

Environmental conditions Requirements

Operating Temperature 0 °C to 40 °C

Operating humidity 20% to 85% RH non-condensing

Relative humidity 10% to 80%

NOTE

The CERTIFIER40G, CERTIFIER10G complies with the following Safety and Regulatory

requirements.

DIN EN 55024, Edition:2003-10 (IEC/CISPR 24:1997, modified + A1:2001 + A2:2002); EN

55024:1998 + A1:2001 + A2:2003

DIN EN 55022; VDE 0878-22:2008-05 (IEC/CISPR 22:2005, modified + A1:2005); EN

55022:2006 + A1:2007

Regulatory Markings

The CE mark is a registered trademark of

the European Community. This CE mark

shows that the product complies with all

the relevant European Legal Directives.

Manufacturer‘s Name

Psiber Data Pte. Ltd

Manufacturer’s Address

3 Science Park Drive #03-08,

The Franklin Singapore Science Park 1,

Singapore 118223

Declares under sole responsibility that the product as originally delivered

Description

Cable Certification Tester Kit

Equipment

Cable Certifier

Complies with the essential requirements of the following applicable European Directives and

carries the CE marking accordingly:

DIN EN 55024, Edition:2003-10 (IEC/CISPR 24:1997, modified + A1:2001 + A2:2002); EN

55024:1998 + A1:2001 + A2:2003

DIN EN 55022;

VDE 0878-22:2008-05 (IEC/CISPR 22:2005, modified + A1:2005);

EN 55022:2006 + A1:2007

Signature

Arvind C Patel

Quality Management

Psiber Data Pte. Ltd.

www.psiberdata.com

Date :

December 14, 2010

Declaration of Conformity

Contents

Chapter 1: Getting Started ..................................................................................................................8

Unpacking the box................................................................................................................... 8

Chapter 2: Configuring Certifier.........................................................................................................9

Certifier User Interface............................................................................................................. 9

Touch Screen Layout................................................................................................................ 9

The One Touch Access Buttons ............................................................................................... 11

Chapter 3: Setting Reference............................................................................................................17

Chapter 4: Configuring an AUTOTEST............................................................................................19

Testing Guide for 12-core MPO Testing.................................................................................... 20

Chapter 5: Performing an AUTOTEST .............................................................................................21

Managing test result(s) .......................................................................................................... 23

Exporting test results into J-Report PC Software........................................................................ 24

Chapter 1: Getting Started

Unpacking the box

MPO

Power Meter (Local)

Adapter

Light Source (Remote)

Adapter

Type A Tail Cords

Type A Reference Cord

Type B Reference Cord

Mating Couplers

Chapter 2: Configuring Certifier

Certifier User Interface

Touch Screen Layout

The Graphical User Interface (GUI) in version 7.0’s firmware has been updated with a

more responsive system and quick-access menus.

Certifier boots up to the SETUP screen. It is categorised into 5 groups:

1. Status bar

2. Configuration group

3. Test Settings group

4. Project Settings group

5. System Settings group

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Viavi Apparecchiature di prova

Viavi

Viavi CT-X Manuale utente

Viavi

Viavi E4100 Series Manuale elenco delle parti

Viavi

Viavi 3900 Series Manuale del proprietario

Viavi

Viavi SmartOTDR Manuale elenco delle parti

Viavi

Viavi T-BERD 5800 Manuale elenco delle parti

Viavi

Viavi 7200 Series Manuale del proprietario

Viavi

Viavi SmartOTDR Manuale elenco delle parti

Viavi

Viavi T-BERD 5800 Manuale elenco delle parti

Viavi

Viavi T-BERD MTS 5800 Manuale elenco delle parti

Viavi

Viavi HST-3000 Manuale utente

Viavi

Viavi IFR 6000 Manuale utente

Viavi

Viavi ComXpert CX100 Manuale utente

Viavi

Viavi 7200 Series Manuale utente

Viavi

Viavi HST-3000 Manuale utente

Viavi

Viavi IFR 6000 Manuale utente

Viavi

Viavi OneAdvisor 1000 Manuale utente

Viavi

Viavi T-BERD/MTS-5800 Manuale elenco delle parti

Viavi

Viavi Parent Guide Manuale utente

Viavi

Viavi SmartOTDR Manuale elenco delle parti

Viavi

Viavi NSC-200 Manuale utente

Viavi

Viavi SmartOTDR Manuale elenco delle parti

Viavi

Viavi FIT-82P03 Manuale utente

Viavi

Viavi OBS-500 Manuale utente

Viavi

Viavi T-BERD MTS 5800-100G Manuale elenco delle parti

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente