Vicon V960-N Series Manuale di istruzioni

Quick User Guide V960-N Series Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to User’s manual.

1. Check Contents

No. Item Description

1 Network Camera V960-N Series (V960-N, V961-N, V962-N)

2 Software CD User’s Manual, Utility software

3 Quick User Guide This document

4 Accessories Mounting bracket

Screws for mounting bracket

C-mount adapter ring

DC jack adapter

Dust protection cap

Terminal block connector

Allen wrench

2. Physical Description

Rear View

1. Alarm In/Out, Audio In/Out (use terminal block connector)

2. Video Out

3. Micro SD card (SDHC supported)

Quick User Guide V960-N Series Network Camera

4. Network (RJ-45 PoE supported)

5. Reset Button

6. Power (DC12V / AC24V)

7. Status LED

8. DC Iris

Front View

9. Flange back locking screw

3. Making Connection

1. If you have external devices such

as sensor or alarms, make connection

from terminal block connector.

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

2. Connect Ethernet cable to make connection

to the network hub.

Quick User Guide V960-N Series Network Camera

4. Assign IP Address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, please assign IP address

by the following process.

Execute Discovery_Tool.exe. It will search cameras on the network automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Apply” button.

Then double click the camera in the list, Internet explorer will open

automatically.

5. Web Browser Connection

Note : The Network camera supports Internet Explorer® 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Quick User Guide V960-N Series Network Camera

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. You must turn installation mode off to use 720p

or 1080p streaming.

For further information for setup, please refer to User’s manual

on software CD.

Altri manuali per V960-N Series

Indice

Altri manuali Vicon Telecamera di sicurezza

Vicon

Vicon HPOE-100 Manuale utente

Vicon

Vicon V661D-312IR Istruzioni operative

Vicon

Vicon V980B Series Manuale utente

Vicon

Vicon Surveyor 282-00-02 Series Manuale utente

Vicon

Vicon V923-N Manuale utente

Vicon

Vicon XX152-02-00 Manuale utente

Vicon

Vicon V960D Series Manuale utente

Vicon

Vicon IX 2000 L Manuale utente

Vicon

Vicon V940D Manuale utente

Vicon

Vicon Roughneck AI V2000 Series Manuale utente

Vicon

Vicon SurveyorVF SVFT-M Manuale utente

Vicon

Vicon V700-C Series Manuale utente

Vicon

Vicon surveyor 1000 Manuale utente

Vicon

Vicon V800D Manuale utente

Vicon

Vicon VC-600W Manuale utente

Vicon

Vicon Surveyor MKII Series XX282-40-01 Guida rapida

Vicon

Vicon VC-700W Manuale utente

Vicon

Vicon Roughneck V2100D Series Manuale utente

Vicon

Vicon Cruiser SN673V-C Manuale utente

Vicon

Vicon V1020-WIR-180-1 Manuale utente

Vicon

Vicon Surveyor 99 Manuale utente

Vicon

Vicon SurveyorVFT SVFT-C266M Manuale utente

Vicon

Vicon VC466-DSP Manuale utente

Vicon

Vicon Roughneck V910V3 Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente