Viega 8310.76 Manuale utente

for wall-mounted cisterns by various manufacturers

Model Year built:

8310.76 from 04/2017

en_INT

Filling valve set

Instructions for Use

Filling valve set 2 from 12

Table of contents

1About these instructions for use 4

1.1 Target groups 4

1.2 Labelling of notes 4

1.3 About this translated version 5

2Product information 6

2.1 Area of application 6

2.2 Product description 6

3Handling 7

3.1 Assembly 7

3.1.1 Mounting the filling valve set 7

3.1.2 Cleaning / replacing the membrane valve 9

3.2 Disposal 12

Table of contents

Filling valve set 3 from 12

1 About these instructions for use

1.1 Target groups

The information in this instruction manual is directed at the following

groups of people:

nHeating and sanitary professionals and trained personnel

It is not permitted for individuals without the abovementioned training or

qualification to mount, install and, if required, maintain this product. This

restriction does not extend to possible operating instructions.

The installation of Viega products must take place in accordance with

the general rules of engineering and the Viega instructions for use.

1.2 Labelling of notes

Warning and advisory texts are set aside from the remainder of the text

and are labelled with the relevant pictographs.

DANGER!

This symbol warns against possible life-threatening injury.

WARNING!

This symbol warns against possible serious injury.

CAUTION!

This symbol warns against possible injury.

NOTICE!

This symbol warns against possible damage to property.

Notes give you additional helpful tips.

About these instructions for use

Filling valve set 4 from 12

1.3 About this translated version

This instruction for use contains important information about the choice

of product or system, assembly and commissioning as well as intended

use and, if required, maintenance measures. The information about the

products, their properties and application technology are based on the

current standards in Europe (e. g. EN) and/or in Germany

(e. g. DIN/DVGW).

Some passages in the text may refer to technical codes in Europe/

Germany. These should serve as recommendations in the absence of

corresponding national regulations. The relevant national laws, stand-

ards, regulations, directives and other technical provisions take priority

over the German/European directives specified in this manual: The

information herein is not binding for other countries and regions; as said

above, they should be understood as a recommendation.

About these instructions for use

Filling valve set 5 from 12

2 Product information

2.1 Area of application

The filling valve set is intended for filling a flush-mounted cistern.

2.2 Product description

Fig. 1: Filling valve set

1 filling valve

2 union nut

3 nipples

4 Clamp connector

5 cistern fastening (3-pc.)

6 spacer

Product information

Filling valve set 6 from 12

3 Handling

3.1 Assembly

3.1.1 Mounting the filling valve set

Push the nipple through the union nut.

Place the spacer on.

Insert the group (consisting of union nut and spacer) in the filling

valve.

Hand-tighten the union nut.

Push the filling valve with the nipple through the opening of the cis-

tern and fasten it.

Mounting on the left side

Mounting on the right side

Handling

Filling valve set 7 from 12

Push the filling valve with the nipple through the opening of the cis-

tern and fasten it.

Fasten the nipple from the outside at the cistern.

Connect the nipple with union nut / flexible hose or Cu pipe / clamp

connector.

Handling

Filling valve set 8 from 12

3.1.2 Cleaning / replacing the membrane valve

Dismantle the filling valve.

Fold up the catches on the cover.

Remove the cover upwards.

Handling

Filling valve set 9 from 12

Bend up the holder for the float.

Slide the holder downwards.

Use snipe nose pliers to release the fixing rim by rotating through

45° in anti-clockwise direction.

Remove the closing piece.

Handling

Filling valve set 10 from 12

Indice

Altri manuali Viega Unità di controllo

Viega

Viega ManaBloc Foglio di istruzioni

Viega

Viega 2337.5 Manuale utente

Viega

Viega 2275.2 Manuale utente

Viega

Viega PureFlow Crimp Foglio di istruzioni

Viega

Viega 56160 Foglio di istruzioni

Viega

Viega 8127.3 Manuale utente

Viega

Viega 2281.7 Manuale utente

Viega

Viega 8310.0 Manuale utente

Viega

Viega Easytop XL Series Manuale utente

Viega

Viega Easytop 2275.10 Manuale utente

Viega

Viega 8461.18 Manuale utente

Viega

Viega 8133.3 Manuale utente

Viega

Viega G2101 Manuale utente

Viega

Viega ProPress 22074 Foglio di istruzioni

Viega

Viega 2243.10 Manuale utente

Viega

Viega Multiplex Trio E Manuale utente

Viega

Viega PureFlow Crimp Zero Lead Foglio di istruzioni

Viega

Viega 2235.2 Manuale utente

Viega

Viega Grundfix 4987 Manuale utente

Viega

Viega 8332.3 Manuale utente

Viega

Viega 9690TW Manuale utente

Viega

Viega 1247.4 Manuale utente

Viega

Viega Easytop 2282 Manuale utente

Viega

Viega 8655.11 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente