Vindum CV Series Manuale utente

CV Series

High-Pressure Valves

express permission from Vindum Engineering. While every precaution has been taken in the preparation of this manual, the publisher assumes

no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from use of the information contained herein.

This page is intentionally blank.

________________________________________________________________________

Table of Contents

Chapter 1 General Overview.......................................................................................................1

1.1 Configuration.............................................................................................................................1

1.2 Main O-Ring Seal Material........................................................................................................1

1.3 Pressure Rating ..........................................................................................................................1

1.4 Solenoid Pilot Valve..................................................................................................................1

1.5 Valve Temperature Rating.........................................................................................................2

1.6 Wetted Parts...............................................................................................................................2

1.7 Everything is included with your CV Valve..............................................................................2

2.1 Principles of Operation for the 2-Way Valve............................................................................5

Chapter 2 Understanding Your Valve....................................................................................5

2.1.1 Possible Configurations of the 2-Way Valve..................................................................5

2.1.2 Direction of Flow............................................................................................................5

2.2 Principles of Operation for the 3-Way Valve............................................................................5

2.2.1 Possible Configurations of the 3-Way Valve..................................................................6

2.2.1.1 Open / Closed Position (A1 / B2)......................................................................6

2.2.1.2 Closed / Open Position (B1 / A2)......................................................................6

2.2.1.3 Open / Open Position (A1 / A2) ........................................................................6

2.2.1.4 Closed / Closed Position (B1 / B2)....................................................................7

Chapter 3 Solenoid Pilot Valves & Manifolds....................................................................9

3.1 Air Supply Requirements...........................................................................................................9

3.2 Electrical Power.........................................................................................................................9

3.3 Air Input and Output................................................................................................................10

3.4 High Temperature CV Valves .................................................................................................11

Chapter 4 CV-200 Series & CV-400 Series Valve Maintentance.............................13

4.1 Tools You Will Need...............................................................................................................13

4.2 Disassembling the 2-Way Valve..............................................................................................13

4.3 Disassembling the Piston Assembly........................................................................................14

4.4 Disassembling the Sleeve Assembly .......................................................................................15

4.5 Inspecting the Sleeve and Cone...............................................................................................16

4.6 Reassembling the Sleeve Assembly.........................................................................................17

________________________________________________________________________

4.7 Reassembling the Piston Assembly.........................................................................................17

4.8 Reassembling the 2-Way Valve...............................................................................................18

Chapter 5 CV-300 Series & CV-500 Series Valve Maintenance.............................19

5.1 Differences Between the CV 2-Way and 3-Way Valves.........................................................19

5.2 Disassembling the 3-Way Valve..............................................................................................19

5.3 Disassembling the Piston Assembly........................................................................................20

5.4 Disassembling the Sleeve Assembly .......................................................................................20

5.5 Reassembling the Sleeve Assembly.........................................................................................20

5.6 Reassembling the Piston Assembly.........................................................................................20

5.7 Reassembling the 3-Way Valve...............................................................................................20

Chapter 6 Maintenance & Troubleshooting......................................................................23

6.1 Air Supply Problems................................................................................................................23

6.1.1 Solenoid Pilot Valve Visual Check...............................................................................23

6.1.1.1 If the Light Goes On and Off for a Different Solenoid Pilot Valve ................24

6.1.1.2 If No Light Goes On or Off .............................................................................24

6.1.2 Solenoid Pilot Valve Audio Check...............................................................................24

6.1.2.1 No “Air Escaping” Sound When CV Valves Are Opened & Closed..............24

6.1.2.2 The Air Supply is Not Dry...............................................................................25

6.1.2.3 The Air Pressure is Too Low...........................................................................25

6.1.2.4 The Air Pressure is Too High ..........................................................................25

6.1.2.5 Constant “Air Escaping” Sound.......................................................................25

6.1.2.6 Compressed Air Supply Runs Out Quickly.....................................................27

6.2 Fluid Supply Problems.............................................................................................................27

6.2.1 Fluid Leaks from the CV Valve Bleed Port..................................................................27

6.2.2 Fluid Leaks Across a “Closed” Valve ..........................................................................27

6.2.3 Fluid Leaks Into Air Tubes...........................................................................................28

6.2.4 Fluid is Not Traveling Properly....................................................................................28

Appendix 1: Removal & Replacement of the Cone.........................................................29

Appendix 2: CV-210 & CV-310 Valve Components.......................................................31

Appendix 3: CV-405 & CV-505 Valve Components.......................................................33

Appendix 4: CV-410 & CV-510 Valve Components.......................................................35

________________________________________________________________________

iii

Appendix 5: CV-420 & CV-520 Valve Components.......................................................37

Appendix 6: Commercially Available Parts........................................................................39

Appendix 7: O-Ring Compatibility Chart...........................................................................41

Appendix 8: Quote Request / Order Form..........................................................................43

________________________________________________________________________

This page is intentionally blank.

________________________________________________________________________

Chapter 1

1. General Overview

The Vindum Engineering CV High Pressure Valves are available in two configurations;

either as a 2-position, on/off valve, or a 3-way, 4-position valve. The CV Valves are air-

actuated, constant-volume valves with a switching time of less than .1 second. They are

typically used as switching devices in high-pressure fluid flow systems. The valves are

designed so that no fluid is displaced when they are opened or closed. This allows them

to be useful in systems requiring constant volumes or constant pressures during the

switching cycle.

All CV Valves utilize either 316 stainless steel, which is corrosion resistant, or Hastelloy

C-276, which is used for brine applications or highly corrosive fluids. Our standard

valves have a temperature rating of 180°F (80°C). Valves with our high temperature

option have a temperature rating of 320°F (160°C).

1.1 Configuration

Each CV Valve is customized to the needs of the user by utilizing the following options:

The CV Valve can be built as either:

•2-Way, on/off valve which is supplied with a single solenoid pilot valve

•3-Way, 4 position valve which is supplied with 2 solenoid pilot valves. The 3-way, 4-

position valve contains two independently operated valves that are connected with a

tee.

1.2 Main O-Ring Seal Material

The following materials are available for the main o-ring seal. The o-ring seal material

needs to agree with the fluid used.

•Aflas

•Buna

•Teflon

•UHMW

•Viton

1.3 Pressure Rating

The CV-Valve can have a pressure rating of either 5,000; 10,000; or 20,000 psi.

1.4 Solenoid Pilot Valve

The solenoid pilot valves for the 85 to 1,000 psi air supply can be operated by either:

•12 VDC

•24 VDC

________________________________________________________________________

1.5 Valve Temperature Rating

•Standard Ambient Temperature: 180°F (80°C) with push-in type air line fittings.

•Optional High Temperature: 320°F (160°C) with compression type air line fittings

1.6 Wetted Parts

There are two options of materials for the valves wetted parts. (The parts of the valve that

will come in contact with the fluid:

•316 Stainless Steel for inert materials, or

•Hastelloy C-276 for corrosive materials or brine

1.7 Everything is included with your CV Valve

•Valve

•High Pressure Fittings

•Solenoid Pilot Valves

•Pneumatic fittings

•1/8” air tubing

The following tables show additional Valve information.

CV VALVE MODELS

Valve

Model

Maximum

Pressure

Rating [PSI (Bar)]

Internal

Volume (cc)

Approximate

Flow

Coefficient (CP)

2-Way On-Off Valves

CV-210 10,000 (700) 0.11 .06

CV-405 5,000 (350) 0.44 .24

CV-410 10,000 (700) 0,44 .12

CV-420 20,000 (1400) 0.22 .03

3-Way 4 Position Valves

CV-310 10,000 (700) 0.31 .06

CV-505 5,000 (350) 1.08 .24

CV-510 10,000 (700) 0.74 .12

CV-520 20,000 (1400) 0.62 .03

Table 1-1

________________________________________________________________________

Valve Size

Valve

Model Fittings

(Autoclave Engineers) Valve

Dimensions

2-Way On-Off Valves

CV-210

W125 - 1/8” Speedbite 2” diameter x 1.695”

(5.0 cm diameter x 4.3 cm

CV-405 SW250 - 1/4” Speedbite 2.25” diameter x 1.95”

(5.7 cm x 4.9 cm)

CV-410

SW250 - 1/4” Speedbite 2.25” diameter x 1.95”

(5.7 cm x 4.9 cm)

CV-420 F250C - 1/4” High Pressure 2.25” diameter x 1.95”

(5.7 cm x 4.9 cm)

3-Way 4 Position Valves

CV-310

W125 - 1/8” Speedbite 2” diameter x 3.645”

(5.0 cm x 9.2 cm)

CV-505

SW250 - 1/4” Speedbite 2.25” diameter x 4.435”

(57 cm x 11.3 cm)

CV-510

SW250 - 1/4” Speedbite 2.25” diameter x 4.435”

(57 cm x 11.3 cm)

CV-520

F250C - 1/4” High Pressure 2.25” diameter x 4.435”

(57 cm x 11.3 cm)

Table 1-2

________________________________________________________________________

This page is intentionally blank.

Altri manuali per CV Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Vindum Unità di controllo

Vindum

Vindum CV Series Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente