Viper AS1050R Guida utente

Install the squeegee and attach it by

using the two knobs.

Adjust squeegee angle and blade

pressure for optimal water pick-up

by turning the adjustment knob on

the support.

Loosen the two knobs to remove

the side skirt.

Turn the main key to on and press the click on button to install the brush

automatically. Deck will lower and brushes turn slowly to attach.

To install the brush/pad holder, pull up the metal handle and slide in the brush/pad

holder until it stops against the pins in the proper position and release the handle.

Reinstall the side skirt.

Use and maintenance

Operating guidelines AS1050R

December 2020

Disconnect battery charger and store

the cable.

Fill the solution tank with fresh

water and add low foam detergent

according to needs.

The water temperature must not

exceed 104° F (40° C).

Solution level indicator is on the side of the tank showing current level. If the

solution tank is empty or recovery tank full, an indicator on the display will show

up with sound warning.

Click One Touch button to activate

all functions.

Adjust the maximum speed with the

speed adjustment dial.

Use buttons to change cleaning

settings from the dashboard.

During the cleaning job it’s possible

to adjust the solution flow, the brush

pressure, activiting Eco Mode or

Silent Mode from the dashboard.

Maintenance

Operating guidelines AS1050R

Local Viper dealer:

Phone number:

SN:

896 12/2020

December 2020 © 2020 Nilsk, Inc.

Turn OFF the machine using the key. Empty the tank with the hose in the back. Empty

and clean the debris tray in the tank, flush&clean

out the recovery tank.

Empty solution tank.

Check and clean filter (weekly).

With the key turned on press the brush click off

button to remove the brushes/pad holders for

inspection and cleaning.

Park the machine leaving the recovery tank open.

Take the squeegee off, check and clean the blades. Hang the squeegee on the machine to dry.

Connect the battery charger to the charging inlet

on the machine and switch on the charger.

Altri manuali per AS1050R

3

Altri manuali Viper Scrubber

Manuali Scrubber popolari di altre marche

Olympus

Olympus M200H Manuale utente

Clarke

Clarke BEXT 100H Manuale di installazione e funzionamento

JOHNY VAC

JOHNY VAC JVC70BCT Manuale utente

RCm

RCm Elan Series Manuale

Kärcher

Kärcher B 120 W Manuale utente

Truvox

Truvox Orbis MotorScrubber 20 Manuale utente

Numatic

Numatic TTB 4045/100 Manuale utente

U.S. Products

U.S. Products PEX 500-C-TICK Istruzioni operative

Mclennan

Mclennan C510 Manuale utente

Tennant

Tennant T20 LPG Manuale utente

Columbus

Columbus ARA 66 BM 100 Manuale utente

Numatic

Numatic TTV 678G / 300T Manuale utente

American-Lincoln

American-Lincoln 505-945 Manuale utente

FIORENTINI

FIORENTINI ET 65-75 Manuale utente

Floorpul

Floorpul ruby 48 blt Guida utente

Onyx

Onyx RX-34 Manuale utente

Dustbane

Dustbane Hurricane 400 Manuale utente

Sana

Sana EUJ-702 Manuale utente