Vision Drive VD-3000 Manuale utente
Ver. VD3000E 1.1E
CAR BLACK BOX
User Manual
®
Before Use
Thank you for choosing this product.
The following contents describe the responsibility scope of the warranty service covered by us
and the product cautions.
Before you use, full knowledge of the product is recommended before using.
Warranty Service and Responsibility Scope
We shall not held responsible for the damages caused by errors or data loss of this product,
as well as any damages or losses derived from the condition.
VD-3000 is designed to record, store, play and analyze the videos incurred by impacts and
car accidents or recorded by user’s discretion. However, it is not assured that the product
will record all videos in every environment.
Furthermore, under circumstances where the impact is too weak, the vibration sensor may
not be able to detect the impact, which induces that the system will be unable to automati-
cally start recording the [Event] file. In such a situation, the urgent save button (SHOT) on
the Vision Drive should be pressed to start recording a video to the [Event] folder.
The information on this manual can change without notice due to technological upgrades.
Check for updates periodically to ensure full knowledge of both the warranty service and
responsibility scope.
Caution
The Vision Drive SD card is the only usable SD card for Vision Drive.
In case of a lost or stolen SD card, please contact your local retail shop to purchase a
replacement.
Do not disassemble or remodel this product. It can cause an electric shock. Any malfunc-
tioning after such action will be cased due to unfitting use of the product and no warranty
service shall be provided. Consult the retailer for product maintenance and repairs if
necessary.
Only use adaptors with the appropriate specification. Not doing so will result in defecting
the product or cause fire.
Using enclosed cables for other uses than advised will result in defect or fire. All wiring
should be carefully implemented so the cable may not be damaged.
When installing the device to your vehicle, follow all the procedures and make sure the hold
is secure. Unclean surface will weaken the adhesive strength and can damage the product
if it drops due to weak adhesion.
This product is not waterproof. Make sure to avoid liquids and impurities entering the
product..
Under the circumstances where the product is wired to the power supply of the vehicle
directly or if the cigar jack is connected to the power supply while the engine is off, make
sure to disengage the device to prevent battery outage for your vehicle.
If a damaged or a non Vision Drive SD card is used, the recorded data maybe damaged or
will not record and/or replay due to difference in quality.
Do not use chemicals or detergents to clean the device. This can result in product malfunc-
tioning.
Excessive tinting on the window may distort or reduce clarity of recorded data.
Cumulation of impurities on the camera lense or the window surface near the camera may
result in distortion and reduced clarity of recorded data. These places should always be kept
clean.
Note that due to the use of camera on the product, recording can be distorted under the
condition that brightness suddenly changes such as passing through a tunnel, direct sunlight
reflection on day time or where no light is available at night time.
Caution
If not enough light is available, using fog light may help record better data.
In case of an accelerated impact, the product may not be able to record automatically. In
such a case, please use the (SHOT) button to record manually.
Operating the product while driving is risky and may cause an accident. Any operation
should be done off the road inside a stopped vehicle.
If you eject the SD card while the product is on, the recorded data may be damaged. Make
sure the main power is completely off before removing the SD card from the product.
Dropping or giving an impact on the product during operation can cause defect or fire.
Do not keep the product in an extreme temperature or in humid areas. Being under extreme
heat in summer days or freezing cold in winter days may result in defection of the product.
Also, do not expose the product to direct fire or water.
In case of disassembly of the product, turn off the power completely. Disassembly without
caution may result in product defect.
Keep the SD card in its case while carrying or placing off the product. Static electricity or
other environmental elements can damage the recorded data.
Copy and keep important data on other data storages such as hard disk, CD, portable flash
memory.
We, the company, are not responsible for loss or destruction of stored data.
If the SD card is ejected or the system is turned off while recording, copying or deleting a
data, stored data may be lost or damaged. In a worst case scenario, the SD card may
become defective.
SD card is an expendable supply. After normal period of usage, the partial memory sector
may be damaged which will disable any recording of data. The system installed on the SD
card provide an automated checking function. If use of the function is not stabilizing the
system installed on the SD card, we recommend purchasing a new SD card for recording
data.
Product Structure
The manual and/or quick guide maybe provided on a digital file.
Product setting may change anytime without notice.
Attach Bracket Wire holders Cigar Jack Power AdaptorSD Card
(VD Analyzer Software
User Manual PDF)
Vision Drive Unit
5
6
Part Names
For models with LCD screen
REC LED
GPS LED
MIC
VIEW BUTTON
PLAY BUTTON
SHOT BUTTON LCD SCREEN
GPS SENSOR
CAMERA
BRACKET ATTACHED TO THE UNIT’S BODY
POWER PORT
EXTERNAL GPS PORT
SD CARD SLOT
(FOR CONNECTING TO GPS SYSTEM
INSTALLED ON THE VEHICLE)
7
Product Specication
Camera
Resolution
LCD
GPS
Impact
Sensor
Memory
Sound Recording
Voice Notication
Power
Operatable Power
Operatable Temp
Consumption
Memory
Eciency
Buttons
Emergency Power
Minimum Light
Dimensions
Weight
PC Requirements
1 Camera (1.3 Mega Pixel CMOS digital camera)
2.4 inch Full color TFT LCD
Internal GPS Module
Event File : 10 seconds prior to impact,
15 to 60 seconds after the impact
(Multiple impact may lengthen the recorded time)
Normal File : 5 minutes per le
-20˚ to 65˚
2.4W
8V ~ 32V
12V ~ 24V (Cigar Jack)
Internal Speaker
CPU : Pentium4 or higher (CPU 2GHz and higher recommended)
Memory : 1G or higher RAM (RAM 2G and higher recommended)
OS system : Window XP/VISTA/WIindows 7
129g (excluding the bracket)
111mm x 75mm x 27mm (excluding the bracket)
1 Lux
EDLC
PLAY / VIEW / SHOT
Internal Mike
SD Memory Card (SDHC GBs : 4GB to 32GB)
1280x960 (HD) 15 frame/sec. Maxium
640x480 (VGA) 30 frame/sec. Maxium
Internal 3G Sensor
(x-y-z, Impact/Sudden Exceleration, Deceleration and Turn)
- Angles : 156˚ (Horizontal 120˚, Vertical 90˚)
- Rotation : Top to Bottom 60˚
8
Installation Precautions
For safe installation and use, read all the information provided below.
This product only uses Vision Drive SD card.
(The program is installed in the SD card for the product to function properly.)
Intall the product after parking the vehicle in a bright and safe area.
Do not disassemble or make alteration to the product.
Disassemble only after the power is turned off completely.
Do not eject the SD card while the product is in operation.
Prior to the installation, clean the area of the installation where the
camera will be positioned.
Use the power cable provided in with the product for the cigar jack
connection for power range of DC12V to DC24V. If wiring is involved,
we recommend using a professional for the installation.
Intall after ignition is off, especially after the power source has been
turned off completely.
For the intial use, do not disconnect power supply till the system
boots completely.
Be aware of engine ignition for it momentaly disconnects power.
9
Installation Sequence
Connect the bracket and the unit
Insert SD card into the unit
Connect cable and attach on windshield
Connect to power source and turn on the unit
Adjust the camera angle
Check LED lamps
Organize cable line
Altri manuali per VD-3000
2
Indice
Altri manuali Vision Drive Telecamera da cruscotto
Vision Drive
Vision Drive VD-3000 Manuale utente
Vision Drive
Vision Drive VD-7000W Manuale utente
Vision Drive
Vision Drive VD-7000W Manuale utente
Vision Drive
Vision Drive VD-3000 Manuale utente
Vision Drive
Vision Drive VD-7000W Guida rapida
Vision Drive
Vision Drive VD-8500WHG Manuale utente
Vision Drive
Vision Drive VD-1600HD Manuale utente
Vision Drive
Vision Drive VD-1500MG/1500MB Manuale utente
Vision Drive
Vision Drive VD-3000 Manuale utente
Vision Drive
Vision Drive VD-9000FHD Manuale utente
